When you install Edge for the Private Cloud, by default the installer creates a single
analytics group named "axgroup-001". At install time, you can change the default name of the
analytics group by including the `AXGROUP` property in the installation config
file:

```
# Specify the analytics group.
# AXGROUP=axgroup-001          # Default name is axgroup-001.
```

See [Install Edge components on a node](https://docs.apigee.com/private-cloud/v4.52.02/install-edge-components-node) for more.

If you later want to add a new analytics group to your installation:

1. Create and configure the new analytics group:
   1. Create the analytics group, named **axgroupNew** :

      ```
      curl -u sysAdminEmail:passWord -H "Content-Type: application/json"
        -X POST 'https://MS_IP:8080/v1/analytics/groups/ax/axgroupNew'
      ```
   2. Add a consumer group to the new analytics group, named **consumer-group-new** . Consumer group names are unique within the context of each analytics group:

      ```
      curl -u sysAdminEmail:passWord -X POST -H 'Accept:application/json'
        -H 'Content-Type:application/json'
        "https://MS_IP:8080/v1/analytics/groups/ax/axgroupNew/consumer-groups?name=consumer-group-new"
      ```
   3. Set the consumer type of the analytics group to "ax":

      ```
      curl -u sysAdminEmail:passWord -X POST -H "Content-Type:application/json"
        "https://MS_IP:8080/v1/analytics/groups/ax/axgroupNew/properties?propName=consumer-type&propValue=ax"
      ```
   4. Add the data center name. By default, you install Edge with a data center named "dc-1". However, if you have multiple data centers, they each have a unique name. This call is optional if you only have a single data center, and recommended if you have multiple data centers:

      ```
      curl -u sysAdminEmail:passWord -X POST -H "Content-Type:application/json"
        "https://MS_IP:8080/v1/analytics/groups/ax/axgroupNew/properties?propName=region&propValue=dc-1"
      ```
2. Add the UUIDs of the Postgres servers to the new analytics group. If you have configured two Postgres servers to function as a master/standby pair, specify both as a comma-separated list of UUIDs.
   1. To get the UUIDs of the Postgres servers, run the following cURL command on every Postgres server node:

      ```
      curl -u sysAdminEmail:passWord https://PG_IP:8084/v1/servers/self
      ```
   2. If you only have a single Postgres server, add it to the analytics group:

      ```
      curl -u sysAdminEmail:passWord -H "Content-Type: application/json"
        -X POST 'https://MS_IP:8080/v1/analytics/groups/ax/axgroupNew/servers?uuid=UUID&type=postgres-server&force=true'
      ```

      If you have multiple Postgres servers configured as a master/standby pair, then add them
      by specifying a comma-separated list of UUIDs:

      ```
      curl -u sysAdminEmail:passWord -H "Content-Type: application/json"
        -X POST 'https://MS_IP:8080/v1/analytics/groups/ax/axgroupNew/servers?uuid=UUID_Master,UUID_standby&type=postgres-server&force=true'
      ```

      This command returns the information about the analytics group, including the UUID of the
      Postgres server in the `postgres-server` property under
      `uuids`:

      ```
      {
        "name" : "axgroupNew",
        "properties" : {
          "region" : "dc-1",
          "consumer-type" : "ax"
        },
        "scopes" : [ ],
        "uuids" : {
          "qpid-server" : [ ],
          "postgres-server" : [ "2cb7211f-eca3-4eaf-9146-66363684e220" ]
        },
        "consumer-groups" : [ {
          "name" : "consumer-group-new",
          "consumers" : [ ],
          "datastores" : [ ],
          "properties" : {
          }
        } ],
        "data-processors" : {
        }
      }
      ```
   3. Add the Postgres server to the data store of the consumer group. This call is required to route analytics messages from the Qpid servers to the Postgres servers:

      ```
      curl -u sysAdminEmail:passWord -X POST -H 'Accept:application/json'
        -H 'Content-Type:application/json'
        "https://MS_IP:8080/v1/analytics/groups/ax/axgroupNew/consumer-groups/consumer-group-new/datastores?uuid=UUID"
      ```

      If multiple Postgre servers are configured as a master/standby pair, then add them by
      specifying a comma-separated list of UUIDs:

      ```
      curl -u sysAdminEmail:passWord -X POST -H 'Accept:application/json'
        -H 'Content-Type:application/json'
        "https://MS_IP:8080/v1/analytics/groups/ax/axgroupNew/consumer-groups/consumer-group-new/datastores?uuid=UUID_Master,UUID_standby"
      ```

      The UUID appears in the `datastores` property of the
      `consumer-groups` in the output.
3. Add the UUIDs of all Qpid servers to the new analytics group. You must perform this step for all Qpid servers.
   1. To get the UUIDs of the Qpid servers, run the following cURL command on every Qpid server node:

      ```
      curl -u sysAdminEmail:passWord https://QP_IP:8083/v1/servers/self
      ```
   2. Add the Qpid server to the analytics group:

      ```
      curl  -u sysAdminEmail:passWord -H "Content-Type: application/json"
        -X POST 'https://MS_IP:8080/v1/analytics/groups/ax/axgroupNew/servers?uuid=UUID&type=qpid-server'
      ```
   3. Add the Qpid server to the consumer group:

      ```
      curl  -u sysAdminEmail:passWord -X POST -H 'Accept:application/json'
        -H 'Content-Type:application/json'
        "https://MS_IP:8080/v1/analytics/groups/ax/axgroupNew/consumer-groups/consumer-group-new/consumers?uuid=UUID"
      ```

      This call returns the following where you can see the UUID of the Qpid server added to
      the `qpid-server` property under `uuids`, and to the
      `consumers` property under `consumer-groups`:

      ```
      {
        "name" : "axgroupNew",
        "properties" : {
          "region" : "dc-1",
          "consumer-type" : "ax"
        },
        "scopes" : [ ],
        "uuids" : {
            "qpid-server" : [ "fb6455c3-f5ce-433a-b98a-bdd016acd5af" ],
            "postgres-server" : [ "2cb7211f-eca3-4eaf-9146-66363684e220" ]
        },
        "consumer-groups" : [ {
          "name" : "consumer-group-new",
          "consumers" : [ "fb6455c3-f5ce-433a-b98a-bdd016acd5af" ],
          "datastores" : [ "2cb7211f-eca3-4eaf-9146-66363684e220" ],
          "properties" : {
          }
        } ],
        "data-processors" : {
        }
      }
      ```
4. Provision an organizations and environment for the new AX group:

   ```
   curl -u sysAdminEmail:passWord -H "Content-Type: application/json"
     -X POST "https://MS_IP:8080/v1/analytics/groups/ax/axgroupNew/scopes?org=org_name&env=env_name"
   ```