安装和配置 Apigee SSO

IP1=hostname_or_IP_of_apigee_SSO
IP2=hostname_or_IP_of_apigee_SSO

## Management Server configuration.
# Management Server IP address and port
MSIP=$IP1
MGMT_PORT=8080
# Edge sys admin username and password as set when you installed Edge.
ADMIN_EMAIL=opdk@google.com
APIGEE_ADMINPW=Secret123
# Set the protocol for the Edge management API. Default is http.
# Set to https if you enabled TLS on the management API.
MS_SCHEME=http

## Postgres configuration.
# Postgres IP address and port
PG_HOST=$IP1
PG_PORT=5432
# Postgres username and password as set when you installed Edge.
# If these credentials change, they must be updated and setup rerun.
PG_USER=apigee
PG_PWD=postgres

## Apigee SSO module configuration.
# Choose either "saml" or "ldap".
SSO_PROFILE="[saml|ldap]"
# Externally accessible IP or DNS name of apigee-sso.
SSO_PUBLIC_URL_HOSTNAME=$IP2
SSO_PG_DB_NAME=database_name_for_sso

# Default port is 9099. If changing, set both properties to the same value.
SSO_PUBLIC_URL_PORT=9099
SSO_TOMCAT_PORT=9099
# Uncomment the following line to set specific SSL cipher using OpenSSL syntax
# SSL_CIPHERS=HIGH:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!kRSA
# Set Tomcat TLS mode to DEFAULT to use HTTP access to apigee-sso.
SSO_TOMCAT_PROFILE=DEFAULT
SSO_PUBLIC_URL_SCHEME=http

# SSO admin user name. The default is ssoadmin.
SSO_ADMIN_NAME=ssoadmin
# SSO admin password using uppercase, lowercase, number, and special chars.
SSO_ADMIN_SECRET=Secret123

# Enable the ability to sign an authentication request with SAML SSO.
SSO_SAML_SIGN_REQUEST=y

# Path to signing key and secret from Create the TLS keys and certificates above.
SSO_JWT_SIGNING_KEY_FILEPATH=/opt/apigee/customer/application/apigee-sso/jwt-keys/privkey.pem
SSO_JWT_VERIFICATION_KEY_FILEPATH=/opt/apigee/customer/application/apigee-sso/jwt-keys/pubkey.pem

###########################################################
#                 Define External IDP                     #
# Use one of the following configuration blocks to        #
# define your IDP settings:                               #
#  - SAML configuration properties                     #
#  - LDAP Direct Binding configuration properties        #
#  - LDAP Indirect Binding configuration properties       #
###########################################################

INSERT_IDP_CONFIG_BLOCK_HERE (SAML, LDAP direct, or LDAP indirect, below)

# Configure an SMTP server so that the Apigee SSO module can send emails to users
SKIP_SMTP=n
SMTPHOST=smtp.example.com
SMTPUSER=smtp@example.com
# omit for no username
SMTPPASSWORD=smtppwd
# omit for no password
SMTPSSL=n
SMTPPORT=25
# The address from which emails are sent
SMTPMAILFROM="My Company <myco@company.com>"

## SAML Configuration Properties
# Insert this section into your base configuration file, as described previously.

# Name of SAML IDP. For example, okta or adfs.
SSO_SAML_IDP_NAME=okta
# Text displayed on the SSO sign-in page after being redirected by either the New or Classic Edge UI for SAML logins.
# Note: Installing SSO does not depend on the Edge UI or which version of the UI you are using.
SSO_SAML_IDP_LOGIN_TEXT="Please log in to your IDP"

# The metadata URL from your IDP.
# If you have a metadata file, and not a URL,
# see "Specifying a metadata file instead of a URL" below.
SSO_SAML_IDP_METADATA_URL=https://dev-343434.oktapreview.com/app/exkar20cl/sso/saml/metadata

# Determines whether to skip TLS validation for the URL specified
# by SSO_SAML_IDP_METADATA_URL.
# This is necessary if the URL uses a self-signed certificate.
# The default value is "n".
SSO_SAML_IDPMETAURL_SKIPSSLVALIDATION=n

# SAML service provider key and cert from Create the TLS keys and certificates above.
SSO_SAML_SERVICE_PROVIDER_KEY=/opt/apigee/customer/application/apigee-sso/saml/server.key
SSO_SAML_SERVICE_PROVIDER_CERTIFICATE=/opt/apigee/customer/application/apigee-sso/saml/selfsigned.crt

# The passphrase used when you created the SAML cert and key.
# The section "Create the TLS keys and certificates" above removes the passphrase,
# but this property is available if you require a passphrase.
# SSO_SAML_SERVICE_PROVIDER_PASSWORD=samlSP123

# Requires that SAML responses be signed by your IDP.
# This property is enabled by default since release 4.50.00.05.
SSO_SAML_SIGNED_ASSERTIONS=y

## LDAP Direct Binding configuration
# Insert this section into your base configuration file, as described previously.

# The type of LDAP profile; in this case, "direct"
SSO_LDAP_PROFILE=direct

# The base URL to which SSO connects; in the form: "ldap://hostname_or_IP:port
SSO_LDAP_BASE_URL=LDAP_base_URL

# Attribute name used by the LDAP server to refer to the user's email address; for example, "mail"
SSO_LDAP_MAIL_ATTRIBUTE=LDAP_email_attribute

# Pattern of the user's DN; for example: =cn={0},ou=people,dc=example,dc=org
# If there is more than one pattern, separate with semicolons (";"); for example:
# =cn={0},ou=people,dc=example,dc=org;=cn={0},ou=people,dc=example,dc=com
SSO_LDAP_USER_DN_PATTERN=LDAP_DN_pattern

# Set true to allow users to login with non-email usernames
SSO_ALLOW_NON_EMAIL_USERNAME=false

## LDAP Indirect Binding configuration
# Insert this section into your base configuration file, as described previously.

# Type of LDAP profile; in this case, "indirect"
SSO_LDAP_PROFILE=indirect

# Base URL to which SSO connects; in the form: "ldap://hostname_or_IP:port
SSO_LDAP_BASE_URL=LDAP_base_URL

# DN and password of the LDAP server's admin user
SSO_LDAP_ADMIN_USER_DN=LDAP_admin_DN
SSO_LDAP_ADMIN_PWD=LDAP_admin_password

# LDAP search base; for example, "dc=example,dc=org"
SSO_LDAP_SEARCH_BASE=LDAP_search_base

# LDAP search filter; for example, "cn={0}"
SSO_LDAP_SEARCH_FILTER=LDAP_search_filter

# Attribute name used by the LDAP server to refer to the user's email address; for example, "mail"
SSO_LDAP_MAIL_ATTRIBUTE=LDAP_email_attribute