Referensi error kebijakan

Anda sedang melihat dokumentasi Apigee Edge.
Buka dokumentasi Apigee X. info

Kebijakan AccessControl

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault variables

These variables are set when a runtime error occurs. For more information, see Variables specific to policy errors.

Example fault response

{
   "fault":{
     "faultstring":"Access Denied for client ip : 52.211.243.3"
      "detail":{
         "errorcode":"accesscontrol.IPDeniedAccess"
      }
   }
}

Example fault rule

<FaultRule name="IPDeniedAccess">
    <Step>
        <Name>AM-IPDeniedAccess</Name>
        <Condition>(fault.name Matches "IPDeniedAccess") </Condition>
    </Step>
    <Condition>(acl.failed = true) </Condition>
</FaultRule>

Kebijakan AccessEntity

For related information, see What you need to know about policy errors and Handling faults.

Runtime errors

None.

Deployment errors

Kebijakan AssignMessage

Bagian ini menjelaskan kode kesalahan dan pesan kesalahan yang dikembalikan dan variabel kesalahan yang disetel oleh Edge saat kebijakan ini memicu kesalahan. Informasi ini penting untuk diketahui jika Anda mengembangkan aturan kesalahan untuk menangani kesalahan. Untuk mempelajari lebih lanjut, lihat Yang perlu Anda ketahui tentang error kebijakan dan Penanganan kesalahan.

Error runtime

Error ini dapat terjadi saat kebijakan dijalankan.

Error saat deployment

Error ini dapat terjadi saat Anda men-deploy proxy yang berisi kebijakan ini.

Variabel kesalahan

Variabel ini ditetapkan saat kebijakan ini memicu error saat runtime. Untuk informasi selengkapnya, lihat Apa yang yang perlu diketahui tentang error kebijakan.

Contoh respons error

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.assignmessage.VariableOfNonMsgType"
      },
      "faultstring":"AssignMessage[AM-SetResponse]: value of variable is not of type Message"
   }
}

Contoh aturan kesalahan

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="Assign Message Faults">
    <Step>
        <Name>AM-CustomNonMessageTypeErrorResponse</Name>
        <Condition>(fault.name Matches "VariableOfNonMsgType") </Condition>
    </Step>
    <Step>
        <Name>AM-CustomSetVariableErrorResponse</Name>
        <Condition>(fault.name = "SetVariableFailed")</Condition>
    </Step>
    <Condition>(assignmessage.failed = true) </Condition>
</FaultRule>

Kebijakan BasicAuthentication

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle errors. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.basicauthentication.UnresolvedVariable"
      },
      "faultstring":"Unresolved variable : request.queryparam.password"
   }
}

Example fault rule

<FaultRule name="Basic Authentication Faults">
    <Step>
        <Name>AM-UnresolvedVariable</Name>
        <Condition>(fault.name Matches "UnresolvedVariable") </Condition>
    </Step>
    <Step>
        <Name>AM-AuthFailedResponse</Name>
        <Condition>(fault.name = "InvalidBasicAuthenticationSource")</Condition>
    </Step>
    <Condition>(BasicAuthentication.BA-Authentication.failed = true) </Condition>
</FaultRule>

Kebijakan ConcurrentRateLimit

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle errors. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Example error response

If the rate limit is exceeded, the policy returns only an HTTP status 503 to the client.

Example fault rule

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRules>
    <FaultRule name="Quota Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "ConcurrentRatelimtViolation") </Condition>
        </Step>
        <Condition>concurrentratelimit.CRL-RateLimitPolicy.failed=true</Condition>
    </FaultRule>
</FaultRules>

Kebijakan DecodeJWS

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

Kebijakan DecodeJWT

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "TokenExpired")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>
    

Kebijakan ExtractVariables

Bagian ini menjelaskan kode kesalahan dan pesan kesalahan yang dikembalikan dan variabel kesalahan yang disetel oleh Edge saat kebijakan ini memicu kesalahan. Informasi ini penting untuk diketahui jika Anda mengembangkan aturan kesalahan untuk menangani kesalahan. Untuk mempelajari lebih lanjut, lihat Yang perlu Anda ketahui tentang error kebijakan dan Penanganan kesalahan.

Error runtime

Error ini dapat terjadi saat kebijakan dijalankan.

Error saat deployment

Error ini dapat terjadi saat Anda men-deploy proxy yang berisi kebijakan ini.

Variabel kesalahan

Variabel ini ditetapkan saat kebijakan ini memicu error saat runtime. Untuk informasi selengkapnya, lihat Apa yang yang perlu diketahui tentang error kebijakan.

Contoh respons error

{
   "fault":{
      "detail":{
         "errorcode":"steps.extractvariables.SourceMessageNotAvailable"
      },
      "faultstring":"request message is not available for ExtractVariable: EV-ParseJsonResponse"
   }
}

Contoh aturan kesalahan

<FaultRule name="Extract Variable Faults">
    <Step>
        <Name>AM-CustomErrorMessage</Name>
        <Condition>(fault.name = "SourceMessageNotAvailable") </Condition>
    </Step>
    <Condition>(extractvariables.EM-ParseJsonResponse.failed = true) </Condition>
</FaultRule>

Kebijakan GenerateJWS

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

Kebijakan GenerateJWT

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "TokenExpired")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>
    

Kebijakan JavaCallout

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when the proxy containing the policy is deployed.

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Example error response

{  
   "fault":{  
      "faultstring":"Failed to execute JavaCallout. [policy_name]",
      "detail":{  
         "errorcode":"javacallout.ExecutionError"
      }
   }
}

Example fault rule

<FaultRule name="JavaCalloutFailed">
    <Step>
        <Name>AM-JavaCalloutError</Name>
    </Step>
    <Condition>(fault.name Matches "ExecutionError") </Condition>
</FaultRule>

Kebijakan JavaScript

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when this policy triggers an error at runtime. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "Execution of SetResponse failed with error: Javascript runtime error: "ReferenceError: "status" is not defined. (setresponse.js:6)\"",
    "detail": {
      "errorcode": "steps.javascript.ScriptExecutionFailed"
    }
  }
}

Example fault rule

<FaultRule name="JavaScript Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ScriptExecutionFailed") </Condition>
    </Step>
    <Condition>(javascript.JavaScript-1.failed = true) </Condition>
</FaultRule>

Kebijakan JSONThreatProtection

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

None.

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "JSONThreatProtection[JPT-SecureRequest]: Execution failed. reason: JSONThreatProtection[JTP-SecureRequest]: Exceeded object entry name length at line 2",
    "detail": {
      "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
    }
  }
}

Example fault rule

<FaultRule name="JSONThreatProtection Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ExecutionFailed") </Condition>
    </Step>
    <Condition>(jsonattack.JPT-SecureRequest.failed = true) </Condition>
</FaultRule>

Jenis kebijakan JSONThreatProtection menentukan kode error berikut:

Kebijakan JSONtoXML

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

None.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "JSONToXML[JSON-to-XML-1]: Source xyz is not available",
    "detail": {
      "errorcode": "steps.json2xml.SourceUnavailable"
    }
  }
}

Example fault rule

<FaultRule name="JSON To XML Faults">
    <Step>
        <Name>AM-SourceUnavailableMessage</Name>
        <Condition>(fault.name Matches "SourceUnavailable") </Condition>
    </Step>
    <Step>
        <Name>AM-BadJSON</Name>
        <Condition>(fault.name = "ExecutionFailed")</Condition>
    </Step>
    <Condition>(jsontoxml.JSON-to-XML-1.failed = true) </Condition>
</FaultRule>

Kebijakan KeyValueMapOperations

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Kebijakan LDAP

This policy uses the following error codes:

Kebijakan MessageLogging

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.messagelogging.StepDefinitionExecutionFailed"
      },
      "faultstring":"Execution failed"
   }
}

Example fault rule

<FaultRule name="MessageLogging">
    <Step>
        <Name>ML-LogMessages</Name>
        <Condition>(fault.name Matches "StepDefinitionExecutionFailed") </Condition>
    </Step>
    <Condition>(messagelogging.ML-LogMessages.failed = true) </Condition>
</FaultRule>

Kebijakan OASValidation

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when this policy triggers an error at runtime. For more information, see What you need to know about policy errors.

Kebijakan PopulateCache

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "[entry] can not be cached. Only serializable entries are cached.",
    "detail": {
      "errorcode": "steps.populatecache.EntryCannotBeCached"
    }
  }
}

Example fault rule

<FaultRule name="Populate Cache Fault">
    <Step>
        <Name>AM-EntryCannotBeCached</Name>
        <Condition>(fault.name Matches "EntryCannotBeCached") </Condition>
    </Step>
    <Condition>(populatecache.POP-CACHE-1.failed = true) </Condition>
</FaultRule>

Kebijakan LookupCache

This section describes the error messages and flow variables that are set when this policy triggers an error. This information is important to know if you are developing fault rules for a proxy. To learn more, see What you need to know about policy errors and Handling faults.

Error code prefix

N/A

Runtime errors

This policy does not throw any runtime errors.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

N/A

Example error response

N/A

Kebijakan InvalidateCache

This section describes the error messages and flow variables that are set when this policy triggers an error. This information is important to know if you are developing fault rules for a proxy. To learn more, see What you need to know about policy errors and Handling faults.

Error code prefix

N/A

Runtime errors

This policy does not throw any runtime errors.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

N/A

Example error response

N/A

Kebijakan ResponseCache

This section describes the error messages and flow variables that are set when this policy triggers an error. This information is important to know if you are developing fault rules for a proxy. To learn more, see What you need to know about policy errors and Handling faults.

Error code prefix

N/A

Runtime errors

This policy does not throw any runtime errors.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

N/A

Example error response

N/A

Kebijakan OAuthV2

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when this policy triggers an error at runtime.

Example error response

These responses are sent back to the client if the <GenerateResponse> element is true.

If <GenerateResponse> is true, the policy returns errors in this format for operations that generate tokens and codes. For a complete list, see see OAuth HTTP error response reference.

{"ErrorCode" : "invalid_client", "Error" :"ClientId is Invalid"}

If <GenerateResponse> is true, the policy returns errors in this format for verify and validate operations. For a complete list, see see OAuth HTTP error response reference.

{  
   {  
      "fault":{  
         "faultstring":"Invalid Access Token",
         "detail":{  
            "errorcode":"keymanagement.service.invalid_access_token"
         }
      }
   }

Example fault rule

<FaultRule name=OAuthV2 Faults">
    <Step>
        <Name>AM-InvalidClientResponse</Name>
        <Condition>(fault.name = "invalid_client") OR (fault.name = "InvalidClientIdentifier")</Condition>
    </Step>
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
        <Condition>(fault.name = "invalid_access_token")</Condition>
    </Step>
    <Condition>(oauthV2.failed = true) </Condition>
</FaultRule>

Kebijakan GetOAuthV2Info

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes. The error names shown below are the strings that are assigned to the fault.name variable when an error occurs. See the Fault variables section below for more details.

Deployment errors

Refer to the message reported in the UI for information about deployment errors.

Fault variables

These variables are set when this policy triggers an error at runtime.

Example error response

{  
   "fault":{  
      "faultstring":"ClientId is Invalid",
      "detail":{  
         "errorcode":"keymanagement.service.invalid_client-invalid_client_id"
      }
   }
}

Example fault rule

<FaultRule name="OAuthV2 Faults">
    <Step>
        <Name>AM-InvalidClientIdResponse</Name>
    </Step>
    <Condition>(fault.name = "invalid_client-invalid_client_id")</Condition>
</FaultRule>

Kebijakan SetOAuthV2Info

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

Refer to the message reported in the UI for information about deployment errors.

Fault variables

These variables are set when this policy triggers an error at runtime.

Example error response

{
  "fault": {
    "faultstring": "Invalid Access Token",
    "detail": {
      "errorcode": "keymanagement.service.invalid_access_token"
    }
  }
}

Example fault rule

<FaultRule name=SetOAuthV2Info Faults">
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
        <Condition>(fault.name = "invalid_access_token")</Condition>
    </Step>
    <Condition>(oauthV2.failed = true) </Condition>
</FaultRule>

Kebijakan DeleteOAuthV2Info

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

Refer to the message reported in the UI for information about deployment errors.

Fault variables

These variables are set when this policy triggers an error at runtime.

Example error response

{
  "fault": {
    "faultstring": "Invalid Access Token",
    "detail": {
      "errorcode": "keymanagement.service.invalid_access_token"
    }
  }
}

Example fault rule

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="DeleteOAuthV2Info_Faults">
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
    </Step>
    <Condition>(fault.name = "invalid_access_token")</Condition>
</FaultRule>

Kebijakan OAuthv1.0a

The OAuthV1 Policy type defines the following error codes.

For OAuth-related HTTP error codes, see OAuth HTTP error response reference.

Kebijakan GetOAuthV1Info

Tidak ada kode error yang ditentukan untuk kebijakan Dapatkan OAuth v1.0a.

Kebijakan DeleteOAuthV1Info

On success, the policy returns a 200 status.

On failure, the policy returns 404 and output similar to the following (depending on whether you are deleting an access token, request token, or verifier.):

HTTP/1.1 404 Not Found
Content-Type: application/json
Content-Length: 144
Connection: keep-alive

{"fault":{"faultstring":"Invalid Access Token","detail":{"errorcode":"keymanagement.service.invalid_request-access_token_invalid"}}}

Kebijakan PythonScript

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when this policy triggers an error at runtime. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "Execution of SetResponse failed with error: Pythonscript runtime error: "ReferenceError: "status" is not defined.\"",
    "detail": {
      "errorcode": "steps.script.ScriptExecutionFailed"
    }
  }
}

Example fault rule

<FaultRule name="PythonScript Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ScriptExecutionFailed") </Condition>
    </Step>
    <Condition>(pythonscript.PythonScript-1.failed = true) </Condition>
</FaultRule>

Kebijakan kuota

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"policies.ratelimit.QuotaViolation"
      },
      "faultstring":"Rate limit quota violation. Quota limit  exceeded. Identifier : _default"
   }
}

Example fault rule

<FaultRules>
    <FaultRule name="Quota Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "QuotaViolation") </Condition>
        </Step>
        <Condition>ratelimit.Quota-1.failed=true</Condition>
    </FaultRule>
</FaultRules>

Kebijakan ResetQuota

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Kebijakan RaiseFault

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

None.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{
   "fault":{
      "detail":{
         "errorcode":"steps.raisefault.RaiseFault"
      },
      "faultstring":"Raising fault. Fault name: [name]"
   }
}

Kebijakan RegularExpressionProtection

This section describes the error codes and messages returned and fault variables set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. If you want to capture an error and raise your own custom error, set the continueOnError="true" attribute on the policy root element. To learn more, see What you need to know about policy errors and Handling faults.

Errors returned from Edge policies follow a consistent format as described in the Error code reference.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Kebijakan SOAPMessageValidation

Bagian ini menjelaskan kode kesalahan dan pesan error yang ditampilkan dan variabel kesalahan yang disetel oleh Edge saat kebijakan ini memicu error. Informasi ini penting untuk diketahui apakah Anda mengembangkan aturan kesalahan untuk menangani kesalahan. Untuk mempelajari lebih lanjut, lihat Yang perlu Anda ketahui tentang error kebijakan dan Menangani kesalahan.

Error runtime

Error ini dapat terjadi saat kebijakan dieksekusi.

Error saat deployment

Error ini dapat terjadi saat Anda men-deploy proxy yang berisi kebijakan ini.

Kebijakan SAMLAssertion

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "GenerateSAMLAssertion[GenSAMLAssert]: Invalid media type",
    "detail": {
      "errorcode": "steps.saml.generate.InvalidMediaTpe"
    }
  }
}

Example fault rule

<FaultRules>
    <FaultRule name="invalid_saml_rule">
        <Step>
            <Name>invalid-saml</Name>
        </Step>
        <Condition>(GenerateSAMLAssertion.failed = "true")</Condition>
    </FaultRule>
</FaultRules>

Kebijakan ServiceCallout

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.servicecallout.RequestVariableNotMessageType"
      },
      "faultstring":"ServiceCallout[ServiceCalloutGetMockResponse]: 
            request variable data_str value is not of type Message"
   }
}

Example fault rule

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="RequestVariableNotMessageType">
    <Step>
        <Name>AM-RequestVariableNotMessageType</Name>
    </Step>
    <Condition>(fault.name = "RequestVariableNotMessageType")</Condition>
</FaultRule>

Kebijakan SpikeArrest

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

Shown below is an example error response:

{  
   "fault":{  
      "detail":{  
         "errorcode":"policies.ratelimit.SpikeArrestViolation"
      },
      "faultstring":"Spike arrest violation. Allowed rate : 10ps"
   }
}

Example fault rule

Shown below is an example fault rule to handle a SpikeArrestViolation fault:

<FaultRules>
    <FaultRule name="Spike Arrest Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "SpikeArrestViolation") </Condition>
        </Step>
        <Condition>ratelimit.Spike-Arrest-1.failed=true</Condition>
    </FaultRule>
</FaultRules>

Kebijakan StatisticsCollector

Bagian ini menjelaskan pesan error dan variabel alur yang ditetapkan saat kebijakan ini memicu error. Informasi ini penting untuk diketahui jika Anda mengembangkan aturan error untuk proxy. Untuk mempelajari lebih lanjut, lihat Yang perlu Anda ketahui tentang error kebijakan dan Menangani error.

Error runtime

Tidak ada.

Error saat deployment

Variabel error

Tidak ada.

Kebijakan VerifyAPIKey

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error responses

{  
   "fault":{  
      "faultstring":"Invalid ApiKey",
      "detail":{  
         "errorcode":"oauth.v2.InvalidApiKey"
      }
   }
}

{  
   "fault":{  
      "detail":{  
         "errorcode":"keymanagement.service.DeveloperStatusNotActive"
      },
      "faultstring":"Developer Status is not Active"
   }
}

Example fault rule

<FaultRule name="FailedToResolveAPIKey">
    <Step>
        <Name>AM-FailedToResolveAPIKey</Name>
    </Step>
    <Condition>(fault.name Matches "FailedToResolveAPIKey") </Condition>
</FaultRule>

Kebijakan VerifyJWS

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

Kebijakan VerifyJWT

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "TokenExpired")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>
    

Kebijakan XMLThreatProtection

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Notes:

• The error name ExecutionFailed is the default error name and will be returned regardless of the type of error detected; however, this default can be changed by setting an organization-level property. When this property is set, the error name will reflect the actual error. For example, "TextExceeded" or "AttrValueExceeded". See Usage Notes for details.
• The 500 HTTP status is the default; however, the HTTP Status can be changed to 400 for request flow faults by setting an organization-level property. See Usage Notes for details.

Deployment errors

None.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "XMLThreatProtection[XPT-SecureRequest]: Execution failed. reason: XMLThreatProtection[XTP-SecureRequest]: Exceeded object entry name length at line 2",
    "detail": {
      "errorcode": "steps.xmlthreatprotection.ExecutionFailed"
    }
  }
}

Example fault rule

<FaultRule name="XML Threat Protection Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ExecutionFailed") </Condition>
    </Step>
    <Condition>(xmlattack.XPT-SecureRequest.failed = true) </Condition>
</FaultRule>

Kebijakan XMLtoJSON

Bagian ini menjelaskan kode kesalahan dan pesan kesalahan yang dikembalikan dan variabel kesalahan yang disetel oleh Edge saat kebijakan ini memicu kesalahan. Informasi ini penting untuk diketahui jika Anda mengembangkan aturan kesalahan untuk menangani kesalahan. Untuk mempelajari lebih lanjut, lihat Yang perlu Anda ketahui tentang error kebijakan dan Penanganan kesalahan.

Error runtime

Error ini dapat terjadi saat kebijakan dijalankan.

Error saat deployment

Error ini dapat terjadi saat Anda men-deploy proxy yang berisi kebijakan ini.

Variabel kesalahan

Variabel ini ditetapkan saat terjadi error runtime. Untuk informasi selengkapnya, lihat Yang perlu Anda ketahui tentang error kebijakan.

Contoh respons error

{
  "fault": {
    "faultstring": "XMLToJSON[XMLtoJSON-1]: Source xyz is not available",
    "detail": {
      "errorcode": "steps.xml2json.SourceUnavailable"
    }
  }
}

Contoh aturan kesalahan

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="XML to JSON Faults">
    <Step>
        <Name>AM-SourceUnavailableMessage</Name>
        <Condition>(fault.name Matches "SourceUnavailable") </Condition>
    </Step>
    <Step>
        <Name>AM-BadXML</Name>
        <Condition>(fault.name = "ExecutionFailed")</Condition>
    </Step>
    <Condition>(xmltojson.XMLtoJSON-1.failed = true) </Condition>
</FaultRule>

Kebijakan XSLTransform

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.