Referência de erro de política

Você está visualizando a documentação do Apigee Edge.
Acesse a documentação da Apigee X. info

Política AccessControl

Nesta seção, descrevemos os códigos e as mensagens de erro retornados e as variáveis de falha definidas pelo Edge quando a política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para lidar com falhas. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Esses erros podem ocorrer quando a política é executada.

Variáveis de falha

Essas variáveis são definidas quando ocorre um erro de tempo de execução. Para mais informações, consulte Variáveis específicas para erros de política.

Exemplo de resposta com falha

{
   "fault":{
     "faultstring":"Access Denied for client ip : 52.211.243.3"
      "detail":{
         "errorcode":"accesscontrol.IPDeniedAccess"
      }
   }
}

Exemplo de regra de falha

<FaultRule name="IPDeniedAccess">
    <Step>
        <Name>AM-IPDeniedAccess</Name>
        <Condition>(fault.name Matches "IPDeniedAccess") </Condition>
    </Step>
    <Condition>(acl.failed = true) </Condition>
</FaultRule>

Política de AccessEntity

Para informações relacionadas, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Nenhum.

Erros de implantação

Política AssignMessage

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when this policy triggers an error at runtime. For more information, see What you need to know about policy errors.

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.assignmessage.VariableOfNonMsgType"
      },
      "faultstring":"AssignMessage[AM-SetResponse]: value of variable is not of type Message"
   }
}

Example fault rule

    <FaultRule name="Assign Message Faults">    <Step>
        <Name>AM-CustomNonMessageTypeErrorResponse</Name>
        <Condition>(fault.name Matches "VariableOfNonMsgType") </Condition>
    </Step>
    <Step>
        <Name>AM-CustomSetVariableErrorResponse</Name>
        <Condition>(fault.name = "SetVariableFailed")</Condition>
    </Step>
    <Condition>(assignmessage.failed = true) </Condition>
</FaultRule>

Política BasicAuthentication

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle errors. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.basicauthentication.UnresolvedVariable"
      },
      "faultstring":"Unresolved variable : request.queryparam.password"
   }
}

Example fault rule

<FaultRule name="Basic Authentication Faults">
    <Step>
        <Name>AM-UnresolvedVariable</Name>
        <Condition>(fault.name Matches "UnresolvedVariable") </Condition>
    </Step>
    <Step>
        <Name>AM-AuthFailedResponse</Name>
        <Condition>(fault.name = "InvalidBasicAuthenticationSource")</Condition>
    </Step>
    <Condition>(BasicAuthentication.BA-Authentication.failed = true) </Condition>
</FaultRule>

Política ConcurrentRateLimit

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle errors. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Example error response

If the rate limit is exceeded, the policy returns only an HTTP status 503 to the client.

Example fault rule

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRules>
    <FaultRule name="Quota Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "ConcurrentRatelimtViolation") </Condition>
        </Step>
        <Condition>concurrentratelimit.CRL-RateLimitPolicy.failed=true</Condition>
    </FaultRule>
</FaultRules>

Política DecodeJWS

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

Política chamada de retorno

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "TokenExpired")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>
    

Política ExtractVariables

Nesta seção, descrevemos os códigos e as mensagens de erro retornados e as variáveis de falha definidas pelo Edge quando a política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para lidar com falhas. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Esses erros podem ocorrer quando a política é executada.

Erros na implantação

Esses erros podem ocorrer quando você implanta um proxy que contém essa política.

Variáveis de falha

Essas variáveis são definidas quando essa política aciona um erro no ambiente de execução. Para mais informações, consulte O que você precisa saber sobre erros de política.

Exemplo de resposta de erro

{
   "fault":{
      "detail":{
         "errorcode":"steps.extractvariables.SourceMessageNotAvailable"
      },
      "faultstring":"request message is not available for ExtractVariable: EV-ParseJsonResponse"
   }
}

Exemplo de regra de falha

<FaultRule name="Extract Variable Faults">
    <Step>
        <Name>AM-CustomErrorMessage</Name>
        <Condition>(fault.name = "SourceMessageNotAvailable") </Condition>
    </Step>
    <Condition>(extractvariables.EM-ParseJsonResponse.failed = true) </Condition>
</FaultRule>

Política GenerateJWS

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

Política GenerateJWT

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "TokenExpired")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>
    

Política de destaque de Java

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when the proxy containing the policy is deployed.

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Example error response

{  
   "fault":{  
      "faultstring":"Failed to execute JavaCallout. [policy_name]",
      "detail":{  
         "errorcode":"javacallout.ExecutionError"
      }
   }
}

Example fault rule

<FaultRule name="JavaCalloutFailed">
    <Step>
        <Name>AM-JavaCalloutError</Name>
    </Step>
    <Condition>(fault.name Matches "ExecutionError") </Condition>
</FaultRule>

Política de JavaScript

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when this policy triggers an error at runtime. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "Execution of SetResponse failed with error: Javascript runtime error: "ReferenceError: "status" is not defined. (setresponse.js:6)\"",
    "detail": {
      "errorcode": "steps.javascript.ScriptExecutionFailed"
    }
  }
}

Example fault rule

<FaultRule name="JavaScript Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ScriptExecutionFailed") </Condition>
    </Step>
    <Condition>(javascript.JavaScript-1.failed = true) </Condition>
</FaultRule>

Política JSONThreatProtection

Nesta seção, descrevemos os códigos e as mensagens de erro retornados e as variáveis de falha definidas pelo Edge quando a política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para lidar com falhas. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Esses erros podem ocorrer quando a política é executada.

Erros na implantação

Nenhum.

Variáveis de falha

Essas variáveis são definidas quando esta política aciona um erro. Para mais informações, consulte O que você precisa saber sobre erros de política.

Exemplo de resposta de erro

{
  "fault": {
    "faultstring": "JSONThreatProtection[JPT-SecureRequest]: Execution failed. reason: JSONThreatProtection[JTP-SecureRequest]: Exceeded object entry name length at line 2",
    "detail": {
      "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
    }
  }
}

Exemplo de regra de falha

<FaultRule name="JSONThreatProtection Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ExecutionFailed") </Condition>
    </Step>
    <Condition>(jsonattack.JPT-SecureRequest.failed = true) </Condition>
</FaultRule>

Os tipos de políticas JSONThreatProtection definem os seguintes códigos de erro:

Política JSONtoXML

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

None.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "JSONToXML[JSON-to-XML-1]: Source xyz is not available",
    "detail": {
      "errorcode": "steps.json2xml.SourceUnavailable"
    }
  }
}

Example fault rule

<FaultRule name="JSON To XML Faults">
    <Step>
        <Name>AM-SourceUnavailableMessage</Name>
        <Condition>(fault.name Matches "SourceUnavailable") </Condition>
    </Step>
    <Step>
        <Name>AM-BadJSON</Name>
        <Condition>(fault.name = "ExecutionFailed")</Condition>
    </Step>
    <Condition>(jsontoxml.JSON-to-XML-1.failed = true) </Condition>
</FaultRule>

Política KeyValueMapOperations

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Política LDAP

This policy uses the following error codes:

Política MessageLogging

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.messagelogging.StepDefinitionExecutionFailed"
      },
      "faultstring":"Execution failed"
   }
}

Example fault rule

<FaultRule name="MessageLogging">
    <Step>
        <Name>ML-LogMessages</Name>
        <Condition>(fault.name Matches "StepDefinitionExecutionFailed") </Condition>
    </Step>
    <Condition>(messagelogging.ML-LogMessages.failed = true) </Condition>
</FaultRule>

Política OASValidation

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when this policy triggers an error at runtime. For more information, see What you need to know about policy errors.

Política PopulateCache

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "[entry] can not be cached. Only serializable entries are cached.",
    "detail": {
      "errorcode": "steps.populatecache.EntryCannotBeCached"
    }
  }
}

Example fault rule

<FaultRule name="Populate Cache Fault">
    <Step>
        <Name>AM-EntryCannotBeCached</Name>
        <Condition>(fault.name Matches "EntryCannotBeCached") </Condition>
    </Step>
    <Condition>(populatecache.POP-CACHE-1.failed = true) </Condition>
</FaultRule>

Política LookupCache

This section describes the error messages and flow variables that are set when this policy triggers an error. This information is important to know if you are developing fault rules for a proxy. To learn more, see What you need to know about policy errors and Handling faults.

Error code prefix

N/A

Runtime errors

This policy does not throw any runtime errors.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

N/A

Example error response

N/A

Política InvalidateCache

Nesta seção, descrevemos as mensagens de erro e as variáveis de fluxo que são definidas quando essa política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para um proxy. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Prefixo do código de erro

N/A

Erros de execução

Essa política não gera erros de ambiente de execução.

Erros de implantação

Esses erros podem ocorrer quando você implanta um proxy que contém essa política.

Variáveis de falha

N/A

Exemplo de resposta de erro

N/A

Política ResponseCache

Nesta seção, descrevemos as mensagens de erro e as variáveis de fluxo que são definidas quando essa política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para um proxy. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Prefixo do código de erro

N/A

Erros de execução

Essa política não gera erros de ambiente de execução.

Erros de implantação

Esses erros podem ocorrer quando você implanta um proxy que contém essa política.

Variáveis de falha

N/A

Exemplo de resposta de erro

N/A

Política do OAuthV2

Esta seção descreve os códigos de falha e as mensagens de erro que são retornadas e as variáveis de falha definidas pelo Edge quando essa política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para lidar com falhas. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Esses erros podem ocorrer quando a política é executada.

Erros de implantação

Esses erros podem ocorrer quando você implanta um proxy que contém esta política.

Variáveis de falha

Essas variáveis são definidas quando essa política aciona um erro no ambiente de execução.

Exemplo de resposta de erro

Essas respostas serão enviadas de volta ao cliente se o elemento <GenerateResponse> for verdadeiro.

Se <GenerateResponse> for verdadeiro, a política retornará erros nesse formato para operações que geram tokens e códigos. Para uma lista completa, consulte a Referência de resposta de erro HTTP do OAuth.

{"ErrorCode" : "invalid_client", "Error" :"ClientId is Invalid"}

Se <GenerateResponse> for verdadeiro, a política retornará erros nesse formato para verificar e validar operações. Para uma lista completa, consulte a Referência de resposta de erro HTTP do OAuth.

{  
   {  
      "fault":{  
         "faultstring":"Invalid Access Token",
         "detail":{  
            "errorcode":"keymanagement.service.invalid_access_token"
         }
      }
   }

Exemplo de regra de falha

<FaultRule name=OAuthV2 Faults">
    <Step>
        <Name>AM-InvalidClientResponse</Name>
        <Condition>(fault.name = "invalid_client") OR (fault.name = "InvalidClientIdentifier")</Condition>
    </Step>
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
        <Condition>(fault.name = "invalid_access_token")</Condition>
    </Step>
    <Condition>(oauthV2.failed = true) </Condition>
</FaultRule>

Política GetOAuthV2Info

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes. The error names shown below are the strings that are assigned to the fault.name variable when an error occurs. See the Fault variables section below for more details.

Deployment errors

Refer to the message reported in the UI for information about deployment errors.

Fault variables

These variables are set when this policy triggers an error at runtime.

Example error response

{  
   "fault":{  
      "faultstring":"ClientId is Invalid",
      "detail":{  
         "errorcode":"keymanagement.service.invalid_client-invalid_client_id"
      }
   }
}

Example fault rule

<FaultRule name="OAuthV2 Faults">
    <Step>
        <Name>AM-InvalidClientIdResponse</Name>
    </Step>
    <Condition>(fault.name = "invalid_client-invalid_client_id")</Condition>
</FaultRule>

Política SetOAuthV2Info

Esta seção descreve os códigos de falha e as mensagens de erro que são retornadas e as variáveis de falha definidas pelo Edge quando essa política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para lidar com falhas. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Esses erros podem ocorrer quando a política é executada.

Erros de implantação

Consulte a mensagem relatada na IU para informações sobre erros de implantação.

Variáveis de falha

Essas variáveis são definidas quando essa política aciona um erro no ambiente de execução.

Exemplo de resposta de erro

{
  "fault": {
    "faultstring": "Invalid Access Token",
    "detail": {
      "errorcode": "keymanagement.service.invalid_access_token"
    }
  }
}

Exemplo de regra de falha

<FaultRule name=SetOAuthV2Info Faults">
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
        <Condition>(fault.name = "invalid_access_token")</Condition>
    </Step>
    <Condition>(oauthV2.failed = true) </Condition>
</FaultRule>

Política DeleteOAuthV2Info

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

Refer to the message reported in the UI for information about deployment errors.

Fault variables

These variables are set when this policy triggers an error at runtime.

Example error response

{
  "fault": {
    "faultstring": "Invalid Access Token",
    "detail": {
      "errorcode": "keymanagement.service.invalid_access_token"
    }
  }
}

Example fault rule

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="DeleteOAuthV2Info_Faults">
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
    </Step>
    <Condition>(fault.name = "invalid_access_token")</Condition>
</FaultRule>

Política do OAuthv1.0a

The OAuthV1 Policy type defines the following error codes.

For OAuth-related HTTP error codes, see OAuth HTTP error response reference.

Política GetOAuthV1Info

No error codes are specified for the Get OAuth v1.0a Info policy.

Política DeleteOAuthV1Info

Se for bem-sucedida, a política retornará um status 200.

Em caso de falha, a política retorna 404 e gera uma saída semelhante à seguinte (dependendo se você está excluindo um token de acesso, token de solicitação ou verificador.):

HTTP/1.1 404 Not Found
Content-Type: application/json
Content-Length: 144
Connection: keep-alive

{"fault":{"faultstring":"Invalid Access Token","detail":{"errorcode":"keymanagement.service.invalid_request-access_token_invalid"}}}

Política PythonScript

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when this policy triggers an error at runtime. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "Execution of SetResponse failed with error: Pythonscript runtime error: "ReferenceError: "status" is not defined.\"",
    "detail": {
      "errorcode": "steps.script.ScriptExecutionFailed"
    }
  }
}

Example fault rule

<FaultRule name="PythonScript Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ScriptExecutionFailed") </Condition>
    </Step>
    <Condition>(pythonscript.PythonScript-1.failed = true) </Condition>
</FaultRule>

Política de cotas

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"policies.ratelimit.QuotaViolation"
      },
      "faultstring":"Rate limit quota violation. Quota limit  exceeded. Identifier : _default"
   }
}

Example fault rule

<FaultRules>
    <FaultRule name="Quota Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "QuotaViolation") </Condition>
        </Step>
        <Condition>ratelimit.Quota-1.failed=true</Condition>
    </FaultRule>
</FaultRules>

Política ResetQuota

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Política RaiseFault

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

None.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{
   "fault":{
      "detail":{
         "errorcode":"steps.raisefault.RaiseFault"
      },
      "faultstring":"Raising fault. Fault name: [name]"
   }
}

Política RegularExpressionProtection

This section describes the error codes and messages returned and fault variables set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. If you want to capture an error and raise your own custom error, set the continueOnError="true" attribute on the policy root element. To learn more, see What you need to know about policy errors and Handling faults.

Errors returned from Edge policies follow a consistent format as described in the Error code reference.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Política SOAPMessageValidation

Nesta seção, descrevemos os códigos e as mensagens de erro retornados, além das variáveis de falha definidas pelo Edge quando esta política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para lidar com falhas. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Esses erros podem ocorrer quando a política é executada.

Erros na implantação

Esses erros podem ocorrer quando você implanta um proxy que contém essa política.

Política SAMLAssertion

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "GenerateSAMLAssertion[GenSAMLAssert]: Invalid media type",
    "detail": {
      "errorcode": "steps.saml.generate.InvalidMediaTpe"
    }
  }
}

Example fault rule

<FaultRules>
    <FaultRule name="invalid_saml_rule">
        <Step>
            <Name>invalid-saml</Name>
        </Step>
        <Condition>(GenerateSAMLAssertion.failed = "true")</Condition>
    </FaultRule>
</FaultRules>

Política ServiceCallout

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.servicecallout.RequestVariableNotMessageType"
      },
      "faultstring":"ServiceCallout[ServiceCalloutGetMockResponse]: 
            request variable data_str value is not of type Message"
   }
}

Example fault rule

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="RequestVariableNotMessageType">
    <Step>
        <Name>AM-RequestVariableNotMessageType</Name>
    </Step>
    <Condition>(fault.name = "RequestVariableNotMessageType")</Condition>
</FaultRule>

Política de Detenção de pico

Esta seção descreve os códigos e mensagens de erro retornados e as variáveis de falha que são definidos pelo Edge quando esta política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para lidar com falhas. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Esses erros podem ocorrer quando a política é executada.

Erros de implantação

Esses erros podem ocorrer quando você implanta um proxy que contém esta política.

Variáveis de falha

Essas variáveis são definidas quando ocorre um erro de tempo de execução. Para mais informações, consulte O que você precisa saber sobre erros de política.

Exemplo de resposta de erro

Veja abaixo um exemplo de resposta de erro:

{  
   "fault":{  
      "detail":{  
         "errorcode":"policies.ratelimit.SpikeArrestViolation"
      },
      "faultstring":"Spike arrest violation. Allowed rate : 10ps"
   }
}

Exemplo de regra de falha

Veja abaixo um exemplo de regra de falha para lidar com uma falha SpikeArrestViolation:

<FaultRules>
    <FaultRule name="Spike Arrest Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "SpikeArrestViolation") </Condition>
        </Step>
        <Condition>ratelimit.Spike-Arrest-1.failed=true</Condition>
    </FaultRule>
</FaultRules>

Política StatisticsCollector

This section describes the error messages and flow variables that are set when this policy triggers an error. This information is important to know if you are developing fault rules for a proxy. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

None.

Deployment errors

Fault variables

None.

Política VerifyAPIKey

Esta seção descreve os códigos de falha e as mensagens de erro que são retornadas e as variáveis de falha definidas pelo Edge quando essa política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para lidar com falhas. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Esses erros podem ocorrer quando a política é executada.

Erros de implantação

Esses erros podem ocorrer quando você implanta um proxy que contém esta política.

Variáveis de falha

Essas variáveis são definidas quando ocorre um erro de tempo de execução. Para mais informações, consulte O que você precisa saber sobre erros de política.

Exemplos de respostas de erros

{
   "fault":{
      "faultstring":"Invalid ApiKey",
      "detail":{
         "errorcode":"oauth.v2.InvalidApiKey"
      }
   }
}

{
   "fault":{
      "detail":{
         "errorcode":"keymanagement.service.DeveloperStatusNotActive"
      },
      "faultstring":"Developer Status is not Active"
   }
}

Exemplo de regra de falha

<FaultRule name="FailedToResolveAPIKey">
    <Step>
        <Name>AM-FailedToResolveAPIKey</Name>
    </Step>
    <Condition>(fault.name Matches "FailedToResolveAPIKey") </Condition>
</FaultRule>

Política VerifyJWS

Nesta seção, descrevemos os códigos e as mensagens de erro retornados, além das variáveis de falha definidas pelo Edge quando esta política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para lidar com falhas. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Esses erros podem ocorrer quando a política é executada.

Erros de implantação

Esses erros podem ocorrer quando você implanta um proxy que contém esta política.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

Política VerifyJWT

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "TokenExpired")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>
    

Política XMLThreatProtection

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Notes:

• The error name ExecutionFailed is the default error name and will be returned regardless of the type of error detected; however, this default can be changed by setting an organization-level property. When this property is set, the error name will reflect the actual error. For example, "TextExceeded" or "AttrValueExceeded". See Usage Notes for details.
• The 500 HTTP status is the default; however, the HTTP Status can be changed to 400 for request flow faults by setting an organization-level property. See Usage Notes for details.

Deployment errors

None.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "XMLThreatProtection[XPT-SecureRequest]: Execution failed. reason: XMLThreatProtection[XTP-SecureRequest]: Exceeded object entry name length at line 2",
    "detail": {
      "errorcode": "steps.xmlthreatprotection.ExecutionFailed"
    }
  }
}

Example fault rule

<FaultRule name="XML Threat Protection Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ExecutionFailed") </Condition>
    </Step>
    <Condition>(xmlattack.XPT-SecureRequest.failed = true) </Condition>
</FaultRule>

Política XMLtoJSON

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "XMLToJSON[XMLtoJSON-1]: Source xyz is not available",
    "detail": {
      "errorcode": "steps.xml2json.SourceUnavailable"
    }
  }
}

Example fault rule

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="XML to JSON Faults">
    <Step>
        <Name>AM-SourceUnavailableMessage</Name>
        <Condition>(fault.name Matches "SourceUnavailable") </Condition>
    </Step>
    <Step>
        <Name>AM-BadXML</Name>
        <Condition>(fault.name = "ExecutionFailed")</Condition>
    </Step>
    <Condition>(xmltojson.XMLtoJSON-1.failed = true) </Condition>
</FaultRule>

Política de XSLTransform

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.