政策錯誤參考資料

您正在查看 Apigee Edge 說明文件。
前往 Apigee X 說明文件。 info

AccessControl 政策

本節說明在這項政策觸發錯誤時，所傳回的錯誤代碼和錯誤訊息，以及 Edge 所設定的錯誤變數。 請務必瞭解這份資訊，以便瞭解您是否要擬定錯誤規則， 處理錯誤詳情請參閱這篇文章 瞭解政策錯誤和處理方式 發生錯誤

執行階段錯誤

執行政策時，可能會發生這些錯誤。

錯誤變數

系統會在發生執行階段錯誤時設定這些變數。詳情請參閱「政策錯誤專用變數」。

錯誤回應範例

{
   "fault":{
     "faultstring":"Access Denied for client ip : 52.211.243.3"
      "detail":{
         "errorcode":"accesscontrol.IPDeniedAccess"
      }
   }
}

錯誤規則範例

<FaultRule name="IPDeniedAccess">
    <Step>
        <Name>AM-IPDeniedAccess</Name>
        <Condition>(fault.name Matches "IPDeniedAccess") </Condition>
    </Step>
    <Condition>(acl.failed = true) </Condition>
</FaultRule>

AccessEntity 政策

For related information, see What you need to know about policy errors and Handling faults.

Runtime errors

None.

Deployment errors

AssignMessage 政策

本節說明在這項政策觸發錯誤時，所傳回的錯誤代碼和錯誤訊息，以及 Edge 所設定的錯誤變數。 請務必瞭解這份資訊，以便瞭解您是否要擬定錯誤規則， 處理錯誤詳情請參閱這篇文章 瞭解政策錯誤和處理方式 發生錯誤

執行階段錯誤

執行政策時，可能會發生這些錯誤。

部署錯誤

當您部署含有這項政策的 Proxy 時，可能會發生這些錯誤。

錯誤變數

當這項政策在執行階段觸發錯誤時，即可設定這些變數。如需更多資訊 見你什麼 需要瞭解政策錯誤

錯誤回應範例

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.assignmessage.VariableOfNonMsgType"
      },
      "faultstring":"AssignMessage[AM-SetResponse]: value of variable is not of type Message"
   }
}

錯誤規則範例

    <FaultRule name="Assign Message Faults">    <Step>
        <Name>AM-CustomNonMessageTypeErrorResponse</Name>
        <Condition>(fault.name Matches "VariableOfNonMsgType") </Condition>
    </Step>
    <Step>
        <Name>AM-CustomSetVariableErrorResponse</Name>
        <Condition>(fault.name = "SetVariableFailed")</Condition>
    </Step>
    <Condition>(assignmessage.failed = true) </Condition>
</FaultRule>

BasicAuthentication 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle errors. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.basicauthentication.UnresolvedVariable"
      },
      "faultstring":"Unresolved variable : request.queryparam.password"
   }
}

Example fault rule

<FaultRule name="Basic Authentication Faults">
    <Step>
        <Name>AM-UnresolvedVariable</Name>
        <Condition>(fault.name Matches "UnresolvedVariable") </Condition>
    </Step>
    <Step>
        <Name>AM-AuthFailedResponse</Name>
        <Condition>(fault.name = "InvalidBasicAuthenticationSource")</Condition>
    </Step>
    <Condition>(BasicAuthentication.BA-Authentication.failed = true) </Condition>
</FaultRule>

ConcurrentRateLimit 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle errors. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Example error response

If the rate limit is exceeded, the policy returns only an HTTP status 503 to the client.

Example fault rule

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRules>
    <FaultRule name="Quota Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "ConcurrentRatelimtViolation") </Condition>
        </Step>
        <Condition>concurrentratelimit.CRL-RateLimitPolicy.failed=true</Condition>
    </FaultRule>
</FaultRules>

DecodeJWS 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

錯誤變數

系統會在發生執行階段錯誤時設定這些變數。詳情請參閱重要須知 政策錯誤。

錯誤回應範例

針對錯誤處理，最佳做法是將錯誤的 errorcode 部分加以包裝 回應。請勿參考 faultstring 中的文字，因為可能會變動。

錯誤規則範例

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

DecodeJWT 政策

本節說明當這項政策觸發錯誤時，傳回的錯誤代碼和錯誤訊息，以及 Edge 設定的錯誤變數。 如果您正在開發錯誤規則來處理錯誤，請務必瞭解這項資訊。詳情請參閱「政策錯誤須知」和「處理錯誤」。

執行階段錯誤

執行政策時，可能會發生這些錯誤。

部署錯誤

若您部署包含這項政策的 Proxy，就可能會發生這些錯誤。

錯誤變數

系統會在發生執行階段錯誤時設定這些變數。詳情請參閱重要須知 政策錯誤。

錯誤回應範例

針對錯誤處理，最佳做法是將錯誤的 errorcode 部分加以包裝 回應。請勿參考 faultstring 中的文字，因為可能會變動。

錯誤規則範例

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "TokenExpired")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>
    

ExtractVariables 政策

本節說明在這項政策觸發錯誤時，所傳回的錯誤代碼和錯誤訊息，以及 Edge 所設定的錯誤變數。 請務必瞭解這份資訊，以便瞭解您是否要擬定錯誤規則， 處理錯誤詳情請參閱這篇文章 瞭解政策錯誤和處理方式 發生錯誤

執行階段錯誤

執行政策時，可能會發生這些錯誤。

部署錯誤

當您部署含有這項政策的 Proxy 時，可能會發生這些錯誤。

錯誤變數

當這項政策在執行階段觸發錯誤時，即可設定這些變數。如需更多資訊 見你什麼 需要瞭解政策錯誤

錯誤回應範例

{
   "fault":{
      "detail":{
         "errorcode":"steps.extractvariables.SourceMessageNotAvailable"
      },
      "faultstring":"request message is not available for ExtractVariable: EV-ParseJsonResponse"
   }
}

錯誤規則範例

<FaultRule name="Extract Variable Faults">
    <Step>
        <Name>AM-CustomErrorMessage</Name>
        <Condition>(fault.name = "SourceMessageNotAvailable") </Condition>
    </Step>
    <Condition>(extractvariables.EM-ParseJsonResponse.failed = true) </Condition>
</FaultRule>

GenerateJWS 政策

本節說明當這項政策觸發錯誤時，傳回的錯誤代碼和錯誤訊息，以及 Edge 設定的錯誤變數。 請務必瞭解您是否正在開發錯誤規則來處理錯誤。詳情請參閱政策錯誤須知和處理錯誤。

執行階段錯誤

執行政策時，可能會發生這些錯誤。

部署錯誤

若您部署包含這項政策的 Proxy，就可能會發生這些錯誤。

錯誤變數

系統會在發生執行階段錯誤時設定這些變數。詳情請參閱重要須知 政策錯誤。

錯誤回應範例

針對錯誤處理，最佳做法是將錯誤的 errorcode 部分加以包裝 回應。請勿參考 faultstring 中的文字，因為可能會變動。

錯誤規則範例

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

GenerateJWT 政策

本節說明當這項政策觸發錯誤時，傳回的錯誤代碼和錯誤訊息，以及 Edge 設定的錯誤變數。 如果您正在開發錯誤規則來處理錯誤，請務必瞭解這項資訊。詳情請參閱「政策錯誤須知」和「處理錯誤」。

執行階段錯誤

執行政策時，可能會發生這些錯誤。

部署錯誤

若您部署包含這項政策的 Proxy，就可能會發生這些錯誤。

錯誤變數

系統會在發生執行階段錯誤時設定這些變數。詳情請參閱重要須知 政策錯誤。

錯誤回應範例

針對錯誤處理，最佳做法是將錯誤的 errorcode 部分加以包裝 回應。請勿參考 faultstring 中的文字，因為可能會變動。

錯誤規則範例

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "TokenExpired")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>
    

JavaCallout 政策

本節說明在這項政策觸發錯誤時，所傳回的錯誤代碼和錯誤訊息，以及 Edge 所設定的錯誤變數。 請務必瞭解這份資訊，以便瞭解您是否要擬定錯誤規則， 處理錯誤詳情請參閱這篇文章 瞭解政策錯誤和處理方式 發生錯誤

執行階段錯誤

執行政策時，可能會發生這些錯誤。

部署錯誤

部署包含政策的 Proxy 時，可能會發生這些錯誤。

錯誤變數

當這項政策觸發錯誤時，系統會設定這些變數。詳情請參閱重要須知 政策錯誤。

錯誤回應範例

{  
   "fault":{  
      "faultstring":"Failed to execute JavaCallout. [policy_name]",
      "detail":{  
         "errorcode":"javacallout.ExecutionError"
      }
   }
}

錯誤規則範例

<FaultRule name="JavaCalloutFailed">
    <Step>
        <Name>AM-JavaCalloutError</Name>
    </Step>
    <Condition>(fault.name Matches "ExecutionError") </Condition>
</FaultRule>

JavaScript 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when this policy triggers an error at runtime. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "Execution of SetResponse failed with error: Javascript runtime error: "ReferenceError: "status" is not defined. (setresponse.js:6)\"",
    "detail": {
      "errorcode": "steps.javascript.ScriptExecutionFailed"
    }
  }
}

Example fault rule

<FaultRule name="JavaScript Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ScriptExecutionFailed") </Condition>
    </Step>
    <Condition>(javascript.JavaScript-1.failed = true) </Condition>
</FaultRule>

JSONThreatProtection 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

None.

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "JSONThreatProtection[JPT-SecureRequest]: Execution failed. reason: JSONThreatProtection[JTP-SecureRequest]: Exceeded object entry name length at line 2",
    "detail": {
      "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
    }
  }
}

Example fault rule

<FaultRule name="JSONThreatProtection Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ExecutionFailed") </Condition>
    </Step>
    <Condition>(jsonattack.JPT-SecureRequest.failed = true) </Condition>
</FaultRule>

JSONThreatProtection 政策類型定義了以下錯誤代碼：

JSONtoXML 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

None.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "JSONToXML[JSON-to-XML-1]: Source xyz is not available",
    "detail": {
      "errorcode": "steps.json2xml.SourceUnavailable"
    }
  }
}

Example fault rule

<FaultRule name="JSON To XML Faults">
    <Step>
        <Name>AM-SourceUnavailableMessage</Name>
        <Condition>(fault.name Matches "SourceUnavailable") </Condition>
    </Step>
    <Step>
        <Name>AM-BadJSON</Name>
        <Condition>(fault.name = "ExecutionFailed")</Condition>
    </Step>
    <Condition>(jsontoxml.JSON-to-XML-1.failed = true) </Condition>
</FaultRule>

KeyValueMapOperations 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

LDAP 政策

這項政策會使用下列錯誤代碼：

MessageLogging 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.messagelogging.StepDefinitionExecutionFailed"
      },
      "faultstring":"Execution failed"
   }
}

Example fault rule

<FaultRule name="MessageLogging">
    <Step>
        <Name>ML-LogMessages</Name>
        <Condition>(fault.name Matches "StepDefinitionExecutionFailed") </Condition>
    </Step>
    <Condition>(messagelogging.ML-LogMessages.failed = true) </Condition>
</FaultRule>

OASValidation 政策

本節說明當這項政策觸發錯誤時，傳回的錯誤代碼和錯誤訊息，以及 Edge 設定的錯誤變數。 如果您正在開發錯誤規則來處理錯誤，請務必瞭解這項資訊。詳情請參閱「政策錯誤須知」和「處理錯誤」。

執行階段錯誤

執行政策時，可能會發生這些錯誤。

部署錯誤

若您部署包含這項政策的 Proxy，就可能會發生這些錯誤。

錯誤變數

當這項政策在執行階段觸發錯誤時，系統會設定這些變數。詳情請參閱「政策錯誤須知」。

PopulateCache 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "[entry] can not be cached. Only serializable entries are cached.",
    "detail": {
      "errorcode": "steps.populatecache.EntryCannotBeCached"
    }
  }
}

Example fault rule

<FaultRule name="Populate Cache Fault">
    <Step>
        <Name>AM-EntryCannotBeCached</Name>
        <Condition>(fault.name Matches "EntryCannotBeCached") </Condition>
    </Step>
    <Condition>(populatecache.POP-CACHE-1.failed = true) </Condition>
</FaultRule>

LookupCache 政策

This section describes the error messages and flow variables that are set when this policy triggers an error. This information is important to know if you are developing fault rules for a proxy. To learn more, see What you need to know about policy errors and Handling faults.

Error code prefix

N/A

Runtime errors

This policy does not throw any runtime errors.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

N/A

Example error response

N/A

InvalidateCache 政策

本節說明這項政策觸發錯誤時設定的錯誤訊息和流程變數。如果您正在開發 Proxy 的錯誤規則，請務必瞭解這項資訊。詳情請參閱「政策錯誤須知」和「處理錯誤」。

錯誤代碼前置字串

不適用

執行階段錯誤

這項政策不會擲回任何執行階段錯誤。

部署錯誤

若您部署包含這項政策的 Proxy，就可能會發生這些錯誤。

錯誤變數

不適用

錯誤回應範例

不適用

ResponseCache 政策

This section describes the error messages and flow variables that are set when this policy triggers an error. This information is important to know if you are developing fault rules for a proxy. To learn more, see What you need to know about policy errors and Handling faults.

Error code prefix

N/A

Runtime errors

This policy does not throw any runtime errors.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

N/A

Example error response

N/A

OAuthV2 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when this policy triggers an error at runtime.

Example error response

These responses are sent back to the client if the <GenerateResponse> element is true.

If <GenerateResponse> is true, the policy returns errors in this format for operations that generate tokens and codes. For a complete list, see see OAuth HTTP error response reference.

{"ErrorCode" : "invalid_client", "Error" :"ClientId is Invalid"}

If <GenerateResponse> is true, the policy returns errors in this format for verify and validate operations. For a complete list, see see OAuth HTTP error response reference.

{  
   {  
      "fault":{  
         "faultstring":"Invalid Access Token",
         "detail":{  
            "errorcode":"keymanagement.service.invalid_access_token"
         }
      }
   }

Example fault rule

<FaultRule name=OAuthV2 Faults">
    <Step>
        <Name>AM-InvalidClientResponse</Name>
        <Condition>(fault.name = "invalid_client") OR (fault.name = "InvalidClientIdentifier")</Condition>
    </Step>
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
        <Condition>(fault.name = "invalid_access_token")</Condition>
    </Step>
    <Condition>(oauthV2.failed = true) </Condition>
</FaultRule>

GetOAuthV2Info 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes. The error names shown below are the strings that are assigned to the fault.name variable when an error occurs. See the Fault variables section below for more details.

Deployment errors

Refer to the message reported in the UI for information about deployment errors.

Fault variables

These variables are set when this policy triggers an error at runtime.

Example error response

{  
   "fault":{  
      "faultstring":"ClientId is Invalid",
      "detail":{  
         "errorcode":"keymanagement.service.invalid_client-invalid_client_id"
      }
   }
}

Example fault rule

<FaultRule name="OAuthV2 Faults">
    <Step>
        <Name>AM-InvalidClientIdResponse</Name>
    </Step>
    <Condition>(fault.name = "invalid_client-invalid_client_id")</Condition>
</FaultRule>

SetOAuthV2Info 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

Refer to the message reported in the UI for information about deployment errors.

Fault variables

These variables are set when this policy triggers an error at runtime.

Example error response

{
  "fault": {
    "faultstring": "Invalid Access Token",
    "detail": {
      "errorcode": "keymanagement.service.invalid_access_token"
    }
  }
}

Example fault rule

<FaultRule name=SetOAuthV2Info Faults">
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
        <Condition>(fault.name = "invalid_access_token")</Condition>
    </Step>
    <Condition>(oauthV2.failed = true) </Condition>
</FaultRule>

DeleteOAuthV2Info 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

Refer to the message reported in the UI for information about deployment errors.

Fault variables

These variables are set when this policy triggers an error at runtime.

Example error response

{
  "fault": {
    "faultstring": "Invalid Access Token",
    "detail": {
      "errorcode": "keymanagement.service.invalid_access_token"
    }
  }
}

Example fault rule

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="DeleteOAuthV2Info_Faults">
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
    </Step>
    <Condition>(fault.name = "invalid_access_token")</Condition>
</FaultRule>

OAuth 1.0a 版政策

OAuthV1 政策類型定義了以下錯誤代碼。

如要瞭解 OAuth 相關 HTTP 錯誤代碼，請參閱「OAuth HTTP 錯誤回應參考資料」。

GetOAuthV1Info 政策

No error codes are specified for the Get OAuth v1.0a Info policy.

DeleteOAuthV1Info 政策

On success, the policy returns a 200 status.

On failure, the policy returns 404 and output similar to the following (depending on whether you are deleting an access token, request token, or verifier.):

HTTP/1.1 404 Not Found
Content-Type: application/json
Content-Length: 144
Connection: keep-alive

{"fault":{"faultstring":"Invalid Access Token","detail":{"errorcode":"keymanagement.service.invalid_request-access_token_invalid"}}}

PythonScript 政策

本節說明系統傳回的錯誤代碼和錯誤訊息，以及錯誤變數。 這項政策觸發錯誤時，由 Edge 設定的。請務必瞭解 您必須制定錯誤規則 處理錯誤詳情請參閱這篇文章 瞭解政策錯誤和處理方式 發生錯誤

執行階段錯誤

執行政策時，可能會發生這些錯誤。

部署錯誤

當您部署含有這項政策的 Proxy 時，可能會發生這些錯誤。

錯誤變數

當這項政策在執行階段觸發錯誤時，即可設定這些變數。如需更多資訊 見你什麼 需要瞭解政策錯誤

錯誤回應範例

{
  "fault": {
    "faultstring": "Execution of SetResponse failed with error: Pythonscript runtime error: "ReferenceError: "status" is not defined.\"",
    "detail": {
      "errorcode": "steps.script.ScriptExecutionFailed"
    }
  }
}

錯誤規則範例

<FaultRule name="PythonScript Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ScriptExecutionFailed") </Condition>
    </Step>
    <Condition>(pythonscript.PythonScript-1.failed = true) </Condition>
</FaultRule>

配額政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"policies.ratelimit.QuotaViolation"
      },
      "faultstring":"Rate limit quota violation. Quota limit  exceeded. Identifier : _default"
   }
}

Example fault rule

<FaultRules>
    <FaultRule name="Quota Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "QuotaViolation") </Condition>
        </Step>
        <Condition>ratelimit.Quota-1.failed=true</Condition>
    </FaultRule>
</FaultRules>

ResetQuota 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

RaiseFault 政策

本節說明系統傳回的錯誤代碼和錯誤訊息，以及錯誤變數。 這項政策觸發錯誤時，由 Edge 設定的。 請務必瞭解這份資訊，以便瞭解您是否要擬定錯誤規則， 處理錯誤詳情請參閱： 政策錯誤須知和 處理錯誤。

執行階段錯誤

執行政策時，可能會發生這些錯誤。

部署錯誤

無。

錯誤變數

系統會在發生執行階段錯誤時設定這些變數。詳情請參閱重要須知 政策錯誤。

錯誤回應範例

{
   "fault":{
      "detail":{
         "errorcode":"steps.raisefault.RaiseFault"
      },
      "faultstring":"Raising fault. Fault name: [name]"
   }
}

RegularExpressionProtection 政策

This section describes the error codes and messages returned and fault variables set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. If you want to capture an error and raise your own custom error, set the continueOnError="true" attribute on the policy root element. To learn more, see What you need to know about policy errors and Handling faults.

Errors returned from Edge policies follow a consistent format as described in the Error code reference.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

SOAPMessageValidation 政策

本節說明當這項政策觸發錯誤時，傳回的錯誤代碼和錯誤訊息，以及 Edge 設定的錯誤變數。 如果您正在開發錯誤規則來處理錯誤，請務必瞭解這項資訊。詳情請參閱「政策錯誤須知」和「處理錯誤」。

執行階段錯誤

執行政策時，可能會發生這些錯誤。

部署錯誤

若您部署包含這項政策的 Proxy，就可能會發生這些錯誤。

SAMLAssertion 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "GenerateSAMLAssertion[GenSAMLAssert]: Invalid media type",
    "detail": {
      "errorcode": "steps.saml.generate.InvalidMediaTpe"
    }
  }
}

Example fault rule

<FaultRules>
    <FaultRule name="invalid_saml_rule">
        <Step>
            <Name>invalid-saml</Name>
        </Step>
        <Condition>(GenerateSAMLAssertion.failed = "true")</Condition>
    </FaultRule>
</FaultRules>

ServiceCallout 政策

本節說明在這項政策觸發錯誤時，所傳回的錯誤代碼和錯誤訊息，以及 Edge 所設定的錯誤變數。 請務必瞭解這份資訊，以便瞭解您是否要擬定錯誤規則， 處理錯誤詳情請參閱這篇文章 瞭解政策錯誤和處理方式 發生錯誤

執行階段錯誤

執行政策時，可能會發生這些錯誤。

部署錯誤

當您部署含有這項政策的 Proxy 時，可能會發生這些錯誤。

錯誤變數

系統會在發生執行階段錯誤時設定這些變數。詳情請參閱重要須知 政策錯誤。

錯誤回應範例

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.servicecallout.RequestVariableNotMessageType"
      },
      "faultstring":"ServiceCallout[ServiceCalloutGetMockResponse]: 
            request variable data_str value is not of type Message"
   }
}

錯誤規則範例

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="RequestVariableNotMessageType">
    <Step>
        <Name>AM-RequestVariableNotMessageType</Name>
    </Step>
    <Condition>(fault.name = "RequestVariableNotMessageType")</Condition>
</FaultRule>

SpikeArrest 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

Shown below is an example error response:

{  
   "fault":{  
      "detail":{  
         "errorcode":"policies.ratelimit.SpikeArrestViolation"
      },
      "faultstring":"Spike arrest violation. Allowed rate : 10ps"
   }
}

Example fault rule

Shown below is an example fault rule to handle a SpikeArrestViolation fault:

<FaultRules>
    <FaultRule name="Spike Arrest Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "SpikeArrestViolation") </Condition>
        </Step>
        <Condition>ratelimit.Spike-Arrest-1.failed=true</Condition>
    </FaultRule>
</FaultRules>

StatisticsCollector 政策

This section describes the error messages and flow variables that are set when this policy triggers an error. This information is important to know if you are developing fault rules for a proxy. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

None.

Deployment errors

Fault variables

None.

VerifyAPIKey 政策

本節說明 Edge 在這項政策觸發錯誤時傳回的錯誤代碼和錯誤訊息，以及設定的錯誤變數。如果您要開發用來處理錯誤的錯誤規則，就必須瞭解這項資訊。如要瞭解詳情，請參閱「政策錯誤須知」和「處理錯誤」。

執行階段錯誤

政策執行時可能會發生這些錯誤。

部署錯誤

部署含有這項政策的 Proxy 時，可能會發生這些錯誤。

錯誤變數

發生執行階段錯誤時，系統會設定這些變數。詳情請參閱「政策錯誤須知」。

錯誤回應範例

{
   "fault":{
      "faultstring":"Invalid ApiKey",
      "detail":{
         "errorcode":"oauth.v2.InvalidApiKey"
      }
   }
}

{
   "fault":{
      "detail":{
         "errorcode":"keymanagement.service.DeveloperStatusNotActive"
      },
      "faultstring":"Developer Status is not Active"
   }
}

錯誤規則範例

<FaultRule name="FailedToResolveAPIKey">
    <Step>
        <Name>AM-FailedToResolveAPIKey</Name>
    </Step>
    <Condition>(fault.name Matches "FailedToResolveAPIKey") </Condition>
</FaultRule>

VerifyJWS 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

錯誤變數

系統會在發生執行階段錯誤時設定這些變數。詳情請參閱重要須知 政策錯誤。

錯誤回應範例

針對錯誤處理，最佳做法是將錯誤的 errorcode 部分加以包裝 回應。請勿參考 faultstring 中的文字，因為可能會變動。

錯誤規則範例

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

VerifyJWT 政策

本節說明當這項政策觸發錯誤時，傳回的錯誤代碼和錯誤訊息，以及 Edge 設定的錯誤變數。 如果您正在開發錯誤規則來處理錯誤，請務必瞭解這項資訊。詳情請參閱「政策錯誤須知」和「處理錯誤」。

執行階段錯誤

執行政策時，可能會發生這些錯誤。

部署錯誤

若您部署包含這項政策的 Proxy，就可能會發生這些錯誤。

錯誤變數

系統會在發生執行階段錯誤時設定這些變數。詳情請參閱重要須知 政策錯誤。

錯誤回應範例

針對錯誤處理，最佳做法是將錯誤的 errorcode 部分加以包裝 回應。請勿參考 faultstring 中的文字，因為可能會變動。

錯誤規則範例

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "TokenExpired")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>
    

XMLThreatProtection 政策

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Notes:

• The error name ExecutionFailed is the default error name and will be returned regardless of the type of error detected; however, this default can be changed by setting an organization-level property. When this property is set, the error name will reflect the actual error. For example, "TextExceeded" or "AttrValueExceeded". See Usage Notes for details.
• The 500 HTTP status is the default; however, the HTTP Status can be changed to 400 for request flow faults by setting an organization-level property. See Usage Notes for details.

Deployment errors

None.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Example error response

{
  "fault": {
    "faultstring": "XMLThreatProtection[XPT-SecureRequest]: Execution failed. reason: XMLThreatProtection[XTP-SecureRequest]: Exceeded object entry name length at line 2",
    "detail": {
      "errorcode": "steps.xmlthreatprotection.ExecutionFailed"
    }
  }
}

Example fault rule

<FaultRule name="XML Threat Protection Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ExecutionFailed") </Condition>
    </Step>
    <Condition>(xmlattack.XPT-SecureRequest.failed = true) </Condition>
</FaultRule>

XMLtoJSON 政策

本節說明在這項政策觸發錯誤時，所傳回的錯誤代碼和錯誤訊息，以及 Edge 所設定的錯誤變數。 請務必瞭解這份資訊，以便瞭解您是否要擬定錯誤規則， 處理錯誤詳情請參閱這篇文章 瞭解政策錯誤和處理方式 發生錯誤

執行階段錯誤

執行政策時，可能會發生這些錯誤。

部署錯誤

當您部署含有這項政策的 Proxy 時，可能會發生這些錯誤。

錯誤變數

系統會在發生執行階段錯誤時設定這些變數。詳情請參閱重要須知 政策錯誤。

錯誤回應範例

{
  "fault": {
    "faultstring": "XMLToJSON[XMLtoJSON-1]: Source xyz is not available",
    "detail": {
      "errorcode": "steps.xml2json.SourceUnavailable"
    }
  }
}

錯誤規則範例

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="XML to JSON Faults">
    <Step>
        <Name>AM-SourceUnavailableMessage</Name>
        <Condition>(fault.name Matches "SourceUnavailable") </Condition>
    </Step>
    <Step>
        <Name>AM-BadXML</Name>
        <Condition>(fault.name = "ExecutionFailed")</Condition>
    </Step>
    <Condition>(xmltojson.XMLtoJSON-1.failed = true) </Condition>
</FaultRule>

XSLTransform 政策

Runtime errors

These errors can occur when the policy executes.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.