Referência de erro de política

Você está visualizando a documentação do Apigee Edge.
Acesse a documentação da Apigee X. info

Política AccessControl

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
accesscontrol.IPDeniedAccess 403 The client IP address, or an IP address passed in the API request, matches an IP address specified in the <SourceAddress> element within the <MatchRule> element of the Access Control Policy, and the action attribute of the <MatchRule> element is set to DENY.

Fault variables

These variables are set when a runtime error occurs. For more information, see Variables specific to policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "IPDeniedAccess"
acl.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. acl.AC-AllowAccess.failed = true

Example fault response

{
   "fault":{
     "faultstring":"Access Denied for client ip : 52.211.243.3"
      "detail":{
         "errorcode":"accesscontrol.IPDeniedAccess"
      }
   }
}

Example fault rule

<FaultRule name="IPDeniedAccess">
    <Step>
        <Name>AM-IPDeniedAccess</Name>
        <Condition>(fault.name Matches "IPDeniedAccess") </Condition>
    </Step>
    <Condition>(acl.failed = true) </Condition>
</FaultRule>

Política de AccessEntity

Para informações relacionadas, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Nenhum.

Erros de implantação

Nome do erro String de falha Status HTTP Ocorre quando
InvalidEntityType Invalid type [entity_type] in ACCESSENTITYStepDefinition [policy_name] N/A O tipo de entidade usado precisa ser um dos tipos compatíveis.

Política AssignMessage

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
steps.assignmessage.SetVariableFailed 500 The policy was not able to set a variable. See the fault string for the name of the unresolved variable.
steps.assignmessage.VariableOfNonMsgType 500

This error occurs if the source attribute in the <Copy> element is set to a variable which is not of type message.

Message type variables represent entire HTTP requests and responses. The built-in Edge flow variables request, response, and message are of type message. To learn more about message variables, see the Variables reference.
steps.assignmessage.UnresolvedVariable 500

This error occurs if a variable specified in the Assign Message policy is either:

  • out of scope (not available in the specific flow where the policy is being executed)
    • or
  • can't be resolved (is not defined)

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
InvalidIndex If the index specified in the <Copy> and/or <Remove> elements of the Assign Message policy is 0 or a negative number, then deployment of the API Proxy fails.
InvalidVariableName If the child element <Name> is empty or not specified in the <AssignVariable> element, then the deployment of the API proxy fails because there is no valid variable name to which to assign a value. A valid variable name is required.
InvalidPayload A payload specified in the policy is invalid.

Fault variables

These variables are set when this policy triggers an error at runtime. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "UnresolvedVariable"
assignmessage.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. assignmessage.AM-SetResponse.failed = true

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.assignmessage.VariableOfNonMsgType"
      },
      "faultstring":"AssignMessage[AM-SetResponse]: value of variable is not of type Message"
   }
}

Example fault rule

    <FaultRule name="Assign Message Faults">    <Step>
        <Name>AM-CustomNonMessageTypeErrorResponse</Name>
        <Condition>(fault.name Matches "VariableOfNonMsgType") </Condition>
    </Step>
    <Step>
        <Name>AM-CustomSetVariableErrorResponse</Name>
        <Condition>(fault.name = "SetVariableFailed")</Condition>
    </Step>
    <Condition>(assignmessage.failed = true) </Condition>
</FaultRule>

Política BasicAuthentication

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle errors. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
steps.basicauthentication.InvalidBasicAuthenticationSource 500 On a decode when the incoming Base64 encoded string does not contain a valid value or the header is malformed (e.g., does not start with "Basic").
steps.basicauthentication.UnresolvedVariable 500 The required source variables for the decode or encode are not present. This error can only occur if IgnoreUnresolvedVariables is false.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Occurs when Fix
UserNameRequired The <User> element must be present for the named operation.
PasswordRequired The <Password> element must be present for the named operation.
AssignToRequired The <AssignTo> element must be present for the named operation.
SourceRequired The <Source> element must be present for the named operation.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "UnresolvedVariable"
BasicAuthentication.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. BasicAuthentication.BA-Authenticate.failed = true

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.basicauthentication.UnresolvedVariable"
      },
      "faultstring":"Unresolved variable : request.queryparam.password"
   }
}

Example fault rule

<FaultRule name="Basic Authentication Faults">
    <Step>
        <Name>AM-UnresolvedVariable</Name>
        <Condition>(fault.name Matches "UnresolvedVariable") </Condition>
    </Step>
    <Step>
        <Name>AM-AuthFailedResponse</Name>
        <Condition>(fault.name = "InvalidBasicAuthenticationSource")</Condition>
    </Step>
    <Condition>(BasicAuthentication.BA-Authentication.failed = true) </Condition>
</FaultRule>

Política ConcurrentRateLimit

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle errors. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Occurs when
policies.concurrentratelimit.ConcurrentRatelimtViolation 503

ConcurrentRatelimit connection exceeded. Connection limit : {0}

Note: The Fault code shown on the left is correct, although it contains a misspelling ("limt"). Be sure to use the code exactly as shown here when creating fault rules to trap this error.

Deployment errors

Error name Occurs when
InvalidCountValue ConcurrentRatelimit invalid count value specified.
ConcurrentRatelimitStepAttachment\
NotAllowedAtProxyEndpoint		 Concurrent Ratelimit policy {0} attachment is not allowed at proxy request/response/fault paths. This policy must be placed on the Target Endpoint.
ConcurrentRatelimitStepAttachment\
MissingAtTargetEndpoint		 Concurrent Ratelimit policy {0} attachment is missing at target request/response/fault paths. This policy must be placed in the Target Request Preflow, Target Response Postflow, and DefaultFaultRule.
InvalidTTLForMessageTimeOut ConcurrentRatelimit invalid ttl value specified for message timeout. It must be a positive integer.

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "ConcurrentRatelimtViolation"

Note: The Error code shown in the example is correct, although it contains a misspelling ("limt"). Please be sure to use the code exactly as shown here when creating fault rules to trap this error.

concurrentratelimit.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. concurrentratelimit.CRL-RateLimitPolicy.failed = true

Example error response

If the rate limit is exceeded, the policy returns only an HTTP status 503 to the client.

Example fault rule

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRules>
    <FaultRule name="Quota Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "ConcurrentRatelimtViolation") </Condition>
        </Step>
        <Condition>concurrentratelimit.CRL-RateLimitPolicy.failed=true</Condition>
    </FaultRule>
</FaultRules>

Política DecodeJWS

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Occurs when
steps.jws.FailedToDecode 401 The policy was unable to decode the JWS. The JWS is possibly corrupted.
steps.jws.FailedToResolveVariable 401 Occurs when the flow variable specified in the <Source> element of the policy does not exist.
steps.jws.InvalidClaim 401 For a missing claim or claim mismatch, or a missing header or header mismatch.
steps.jws.InvalidJsonFormat 401 Invalid JSON found in the JWS header.
steps.jws.InvalidJws 401 This error occurs when the JWS signature verification fails.
steps.jws.InvalidPayload 401 The JWS payload is invalid.
steps.jws.InvalidSignature 401 <DetachedContent> is omitted and the JWS has a detached content payload.
steps.jws.MissingPayload 401 The JWS payload is missing.
steps.jws.NoAlgorithmFoundInHeader 401 Occurs when the JWS omits the algorithm header.
steps.jws.UnknownException 401 An unknown exception occurred.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Occurs when
InvalidAlgorithm The only valid values are: RS256, RS384, RS512, PS256, PS384, PS512, ES256, ES384, ES512, HS256, HS384, HS512.

EmptyElementForKeyConfiguration

FailedToResolveVariable

InvalidConfigurationForActionAndAlgorithmFamily

InvalidConfigurationForVerify

InvalidEmptyElement

InvalidFamiliesForAlgorithm

InvalidKeyConfiguration

InvalidNameForAdditionalClaim

InvalidNameForAdditionalHeader

InvalidPublicKeyId

InvalidPublicKeyValue

InvalidSecretInConfig

InvalidTypeForAdditionalClaim

InvalidTypeForAdditionalHeader

InvalidValueForElement

InvalidValueOfArrayAttribute

InvalidVariableNameForSecret

MissingConfigurationElement

MissingElementForKeyConfiguration

MissingNameForAdditionalClaim

MissingNameForAdditionalHeader

 Other possible deployment errors.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "TokenExpired"
JWS.failed All JWS policies set the same variable in the case of a failure. jws.JWS-Policy.failed = true

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

Política chamada de retorno

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
steps.jwt.FailedToDecode 401 Occurs when the policy is unable to decode the JWT. The JWT may be malformed, invalid or otherwise not decodable.
steps.jwt.FailedToResolveVariable 401 Occurs when the flow variable specified in the <Source> element of the policy does not exist.
steps.jwt.InvalidToken 401 Occurs when the flow variable specified in the <Source> element of the policy is out of scope or can't be resolved.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
InvalidEmptyElement Occurs when the flow variable containing the JWT to be decoded is not specified in the <Source> element of the policy.

Variáveis de falha

Essas variáveis são definidas quando ocorre um erro de tempo de execução. Para mais informações, consulte O que você precisa saber sobre erros de política.

Variáveis Onde Exemplo
fault.name="fault_name" fault_name é o nome da falha, conforme listado na tabela Erros de ambiente de execução acima. O nome da falha é a última parte do código de falha. fault.name Matches "TokenExpired"
JWT.failed Todas as políticas do JWT definem a mesma variável em caso de falha. JWT.failed = true

Exemplo de resposta de erro

Códigos de falha de política JWT

Para gerenciar erros, a prática recomendada é interceptar a parte errorcode da resposta de erro. Não confie no texto em faultstring, porque ele pode mudar.

Exemplo de regra de falha

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "TokenExpired")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>

Política ExtractVariables

Nesta seção, descrevemos os códigos e as mensagens de erro retornados e as variáveis de falha definidas pelo Edge quando a política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para lidar com falhas. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Esses erros podem ocorrer quando a política é executada.

Código de falha Status HTTP Causa Correção
steps.extractvariables.ExecutionFailed 500

Esse erro ocorre quando:

  • O payload de entrada (JSON, XML) está vazio.
  • A entrada (JSON, XML etc.) passada para a política é inválida ou está incorreta.
steps.extractvariables.ImmutableVariable 500 Uma variável usada na política é imutável. A política não conseguiu definir essa variável.
steps.extractvariables.InvalidJSONPath 500 Esse erro ocorrerá se um caminho JSON inválido for usado no elemento JSONPath da política. Por exemplo, se um payload JSON não tiver o objeto Name, mas você especificar Name como o caminho na política, esse erro ocorrerá.
steps.extractvariables.JsonPathParsingFailure 500 Esse erro ocorre quando a política não consegue analisar um caminho JSON e extrair dados da variável de fluxo especificada no elemento Source. Normalmente, isso acontece se a variável de fluxo especificada no elemento Source não existir no fluxo atual.
steps.extractvariables.SetVariableFailed 500 Esse erro ocorre se a política não puder definir o valor como uma variável. O erro geralmente acontece se você tentar atribuir valores a diversas variáveis com nomes que começam com as mesmas palavras em um formato aninhado separado por ponto.
steps.extractvariables.SourceMessageNotAvailable 500 Esse erro ocorrerá se a variável message especificada no elemento Source da política for:
  • Fora do escopo (não disponível no fluxo específico em que a política está sendo executada) ou
  • Não é possível resolver (não está definida)
steps.extractvariables.UnableToCast 500 Esse erro ocorre se a política não conseguiu converter o valor extraído para uma variável. Normalmente, isso ocorre quando você tenta definir o valor de um tipo de dados para uma variável de outro tipo de dados.

Erros na implantação

Esses erros podem ocorrer quando você implanta um proxy que contém essa política.

Nome do erro Causa Correção
NothingToExtract Se a política não tiver nenhum dos elementos URIPath, QueryParam, Header, FormParam, XMLPayload ou JSONPayload, a implantação do proxy da API falha, porque não há nada para extrair.
NONEmptyPrefixMappedToEmptyURI Esse erro ocorre se a política tiver um prefixo definido no elemento Namespace no elemento XMLPayload, mas nenhum URI será definido.
DuplicatePrefix Esse erro ocorre se a política tiver o mesmo prefixo definido mais de uma vez no elemento Namespace no elemento XMLPayload.
NoXPathsToEvaluate Se a política não tiver o elemento XPath dentro do elemento XMLPayload, a implantação do proxy de API falhará com este erro.
EmptyXPathExpression Se a política tiver uma expressão XPath vazia no elemento XMLPayload, a implantação do proxy da API falhará.
NoJSONPathsToEvaluate Se a política não tiver o elemento JSONPath dentro do elemento JSONPayload, a implantação do proxy de API falhará com este erro.
EmptyJSONPathExpression Se a política tiver uma expressão XPath vazia no elemento XMLPayload, a implantação do proxy da API falhará.
MissingName Se a política não tiver o atributo name em nenhum dos elementos da política, como QueryParam, Header, FormParam ou Variable, quando necessário, a implantação do proxy da API falhará.
PatternWithoutVariable Se a política não tiver uma variável especificada no elemento Pattern, a implantação do proxy de API falhará. O elemento Pattern requer o nome da variável em que os dados extraídos serão armazenados.
CannotBeConvertedToNodeset Se a política tiver uma expressão XPath em que o tipo Variable é definido como nodeset, mas a expressão não pode ser convertida em nodeset, a implantação do proxy de API falhará.
JSONPathCompilationFailed A política não conseguiu compilar um caminho JSON especificado.
InstantiationFailed Não foi possível instanciar a política.
XPathCompilationFailed Se o prefixo ou o valor usado no elemento XPath não fizer parte de nenhum dos namespaces declarados na política, a implantação do proxy de API falhará.
InvalidPattern Se a definição de elemento Pattern for inválida em qualquer um dos elementos como URIPath, QueryParam, Header, FormParam, XMLPayload ou JSONPayload na política, a implantação do proxy de API falhará.

Variáveis de falha

Essas variáveis são definidas quando essa política aciona um erro no ambiente de execução. Para mais informações, consulte O que você precisa saber sobre erros de política.

Variáveis Onde Exemplo
fault.name="fault_name" fault_name é o nome da falha, conforme listado na tabela Erros de ambiente de execução acima. O nome da falha é a última parte do código de falha. fault.name = "SourceMessageNotAvailable"
extractvariables.policy_name.failed policy_name é o nome especificado pelo usuário da política que causou a falha. extractvariables.EV-ParseJsonResponse.failed = true

Exemplo de resposta de erro

{
   "fault":{
      "detail":{
         "errorcode":"steps.extractvariables.SourceMessageNotAvailable"
      },
      "faultstring":"request message is not available for ExtractVariable: EV-ParseJsonResponse"
   }
}

Exemplo de regra de falha

<FaultRule name="Extract Variable Faults">
    <Step>
        <Name>AM-CustomErrorMessage</Name>
        <Condition>(fault.name = "SourceMessageNotAvailable") </Condition>
    </Step>
    <Condition>(extractvariables.EM-ParseJsonResponse.failed = true) </Condition>
</FaultRule>

Política GenerateJWS

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Occurs when
steps.jws.GenerationFailed 401 The policy was unable to generate the JWS.
steps.jws.InsufficientKeyLength 401 For a key less than 32 bytes for the HS256 algorithm
steps.jws.InvalidClaim 401 For a missing claim or claim mismatch, or a missing header or header mismatch.
steps.jws.InvalidCurve 401 The curve specified by the key is not valid for the Elliptic Curve algorithm.
steps.jws.InvalidJsonFormat 401 Invalid JSON found in the JWS header.
steps.jws.InvalidPayload 401 The JWS payload is invalid.
steps.jws.InvalidSignature 401 <DetachedContent> is omitted and the JWS has a detached content payload.
steps.jws.KeyIdMissing 401 The Verify policy uses a JWKS as a source for public keys, but the signed JWS does not include a kid property in the header.
steps.jws.KeyParsingFailed 401 The public key could not be parsed from the given key information.
steps.jws.MissingPayload 401 The JWS payload is missing.
steps.jws.NoAlgorithmFoundInHeader 401 Occurs when the JWS omits the algorithm header.
steps.jws.SigningFailed 401 In GenerateJWS, for a key less than the minimum size for the HS384 or HS512 algorithms
steps.jws.UnknownException 401 An unknown exception occurred.
steps.jws.WrongKeyType 401 Wrong type of key specified. For example, if you specify an RSA key for an Elliptic Curve algorithm, or a curve key for an RSA algorithm.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Occurs when
InvalidAlgorithm The only valid values are: RS256, RS384, RS512, PS256, PS384, PS512, ES256, ES384, ES512, HS256, HS384, HS512.

EmptyElementForKeyConfiguration

FailedToResolveVariable

InvalidConfigurationForActionAndAlgorithmFamily

InvalidConfigurationForVerify

InvalidEmptyElement

InvalidFamiliesForAlgorithm

InvalidKeyConfiguration

InvalidNameForAdditionalClaim

InvalidNameForAdditionalHeader

InvalidPublicKeyId

InvalidPublicKeyValue

InvalidSecretInConfig

InvalidTypeForAdditionalClaim

InvalidTypeForAdditionalHeader

InvalidValueForElement

InvalidValueOfArrayAttribute

InvalidVariableNameForSecret

MissingConfigurationElement

MissingElementForKeyConfiguration

MissingNameForAdditionalClaim

MissingNameForAdditionalHeader

 Other possible deployment errors.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "TokenExpired"
JWS.failed All JWS policies set the same variable in the case of a failure. jws.JWS-Policy.failed = true

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

Política GenerateJWT

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Occurs when
steps.jwt.AlgorithmInTokenNotPresentInConfiguration 401 Occurs when the verification policy has multiple algorithms.
steps.jwt.AlgorithmMismatch 401 The algorithm specified in the Generate policy did not match the one expected in the Verify policy. The algorithms specified must match.
steps.jwt.FailedToDecode 401 The policy was unable to decode the JWT. The JWT is possibly corrupted.
steps.jwt.GenerationFailed 401 The policy was unable to generate the JWT.
steps.jwt.InsufficientKeyLength 401 For a key less than 32 bytes for the HS256 algorithm, less than 48 bytes for the HS386 algortithm, and less than 64 bytes for the HS512 algorithm.
steps.jwt.InvalidClaim 401 For a missing claim or claim mismatch, or a missing header or header mismatch.
steps.jwt.InvalidCurve 401 The curve specified by the key is not valid for the Elliptic Curve algorithm.
steps.jwt.InvalidJsonFormat 401 Invalid JSON found in the header or payload.
steps.jwt.InvalidToken 401 This error occurs when the JWT signature verification fails.
steps.jwt.JwtAudienceMismatch 401 The audience claim failed on token verification.
steps.jwt.JwtIssuerMismatch 401 The issuer claim failed on token verification.
steps.jwt.JwtSubjectMismatch 401 The subject claim failed on token verification.
steps.jwt.KeyIdMissing 401 The Verify policy uses a JWKS as a source for public keys, but the signed JWT does not include a kid property in the header.
steps.jwt.KeyParsingFailed 401 The public key could not be parsed from the given key information.
steps.jwt.NoAlgorithmFoundInHeader 401 Occurs when the JWT contains no algorithm header.
steps.jwt.NoMatchingPublicKey 401 The Verify policy uses a JWKS as a source for public keys, but the kid in the signed JWT is not listed in the JWKS.
steps.jwt.SigningFailed 401 In GenerateJWT, for a key less than the minimum size for the HS384 or HS512 algorithms
steps.jwt.TokenExpired 401 The policy attempts to verify an expired token.
steps.jwt.TokenNotYetValid 401 The token is not yet valid.
steps.jwt.UnhandledCriticalHeader 401 A header found by the Verify JWT policy in the crit header is not listed in KnownHeaders.
steps.jwt.UnknownException 401 An unknown exception occurred.
steps.jwt.WrongKeyType 401 Wrong type of key specified. For example, if you specify an RSA key for an Elliptic Curve algorithm, or a curve key for an RSA algorithm.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
InvalidNameForAdditionalClaim The deployment will fail if the claim used in the child element <Claim> of the <AdditionalClaims> element is one of the following registered names: kid, iss, sub, aud, iat, exp, nbf, or jti.
InvalidTypeForAdditionalClaim If the claim used in the child element <Claim> of the <AdditionalClaims> element is not of type string, number, boolean, or map, the deployment will fail.
MissingNameForAdditionalClaim If the name of the claim is not specified in the child element <Claim> of the <AdditionalClaims> element, the deployment will fail.
InvalidNameForAdditionalHeader This error ccurs when the name of the claim used in the child element <Claim> of the <AdditionalClaims> element is either alg or typ.
InvalidTypeForAdditionalHeader If the type of claim used in the child element <Claim> of the <AdditionalClaims> element is not of type string, number, boolean, or map, the deployment will fail.
InvalidValueOfArrayAttribute This error occurs when the value of the array attribute in the child element <Claim> of the <AdditionalClaims> element is not set to true or false.
InvalidConfigurationForActionAndAlgorithm If the <PrivateKey> element is used with HS Family algorithms or the <SecretKey> element is used with RSA Family algorithms, the deployment will fail.
InvalidValueForElement If the value specified in the <Algorithm> element is not a supported value, the deployment will fail.
MissingConfigurationElement This error will occur if the <PrivateKey> element is not used with RSA family algorithms or the <SecretKey> element is not used with HS Family algorithms.
InvalidKeyConfiguration If the child element <Value> is not defined in the <PrivateKey> or <SecretKey> elements, the deployment will fail.
EmptyElementForKeyConfiguration If the ref attribute of the child element <Value> of the <PrivateKey> or <SecretKey> elements is empty or unspecified, the deployment will fail.
InvalidVariableNameForSecret This error occurs if the flow variable name specified in the ref attribute of the child element <Value> of the <PrivateKey> or <SecretKey> elements does not contain the private prefix (private.).
InvalidSecretInConfig This error occurs if the child element <Value> of the <PrivateKey> or <SecretKey> elements does not contain the private prefix (private.).
InvalidTimeFormat If the value specified in the<NotBefore> element does not use a supported format, the deployment will fail.

Variáveis de falha

Essas variáveis são definidas quando ocorre um erro de tempo de execução. Para mais informações, consulte O que você precisa saber sobre erros de política.

Variáveis Onde Exemplo
fault.name="fault_name" fault_name é o nome da falha, conforme listado na tabela Erros de ambiente de execução acima. O nome da falha é a última parte do código de falha. fault.name Matches "TokenExpired"
JWT.failed Todas as políticas do JWT definem a mesma variável em caso de falha. JWT.failed = true

Exemplo de resposta de erro

Códigos de falha de política JWT

Para gerenciar erros, a prática recomendada é interceptar a parte errorcode da resposta de erro. Não confie no texto em faultstring, porque ele pode mudar.

Exemplo de regra de falha

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "TokenExpired")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>

Política de destaque de Java

Nesta seção, descrevemos os códigos e as mensagens de erro retornados e as variáveis de falha definidas pelo Edge quando a política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para lidar com falhas. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Esses erros podem ocorrer quando a política é executada.

Código de falha Status HTTP Causa Correção
steps.javacallout.ExecutionError 500 Ocorre quando o código Java gera uma exceção ou retorna nulo durante a execução de uma política JavaCallout.

Erros de implantação

Esses erros podem ocorrer quando o proxy que contém a política é implantado.

Nome do erro String de falha Status HTTP Ocorre quando
ResourceDoesNotExist Resource with name [name] and type [type] does not exist N/D O arquivo especificado no elemento <ResourceURL> não existe.
JavaCalloutInstantiationFailed Failed to instantiate the JavaCallout Class [classname] N/D O arquivo de classe especificado no elemento <ClassName> não está no jar.
IncompatibleJavaVersion Failed to load java class [classname] definition due to - [reason] N/A Consulte string de falha. Consulte também Software e versões compatíveis.
JavaClassNotFoundInJavaResource Failed to find the ClassName in java resource [jar_name] - [class_name] N/D Consulte string de falha.
JavaClassDefinitionNotFound Failed to load java class [class_name] definition due to - [reason] N/D Consulte string de falha.
NoAppropriateConstructor No appropriate constructor found in JavaCallout class [class_name] N/D Consulte string de falha.
NoResourceForURL Could not locate a resource with URL [string] N/D Consulte string de falha.

Variáveis de falha

Essas variáveis são definidas quando esta política aciona um erro. Para mais informações, consulte O que você precisa saber sobre erros de política.

Variáveis Onde Exemplo
fault.name="fault_name" fault_name é o nome da falha, conforme listado na tabela Erros de ambiente de execução acima. O nome da falha é a última parte do código de falha. fault.name Matches "ExecutionError"
javacallout.policy_name.failed policy_name é o nome especificado pelo usuário da política que causou a falha. javacallout.JC-GetUserData.failed = true

Exemplo de resposta de erro

{  
   "fault":{  
      "faultstring":"Failed to execute JavaCallout. [policy_name]",
      "detail":{  
         "errorcode":"javacallout.ExecutionError"
      }
   }
}

Exemplo de regra de falha

<FaultRule name="JavaCalloutFailed">
    <Step>
        <Name>AM-JavaCalloutError</Name>
    </Step>
    <Condition>(fault.name Matches "ExecutionError") </Condition>
</FaultRule>

Política de JavaScript

Esta seção descreve os códigos e mensagens de erro retornados e as variáveis de falha que são definidos pelo Edge quando esta política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para lidar com falhas. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Esses erros podem ocorrer quando a política é executada.

Código de falha Status HTTP Causa Correção
steps.javascript.ScriptExecutionFailed 500 A política do JavaScript pode gerar muitos tipos diferentes de erros ScriptExecutionFailed. Os tipos de erros vistos com mais frequência incluem RangeError, ReferenceError, SyntaxError, TypeError, e URIError.
steps.javascript.ScriptExecutionFailedLineNumber 500 Ocorreu um erro no código JavaScript. Veja a string de falha para mais detalhes. N/A
steps.javascript.ScriptSecurityError 500 Ocorreu um erro de segurança quando o JavaScript foi executado. Consulte a string de falha para mais detalhes. N/A

Erros de implantação

Esses erros podem ocorrer quando você implanta um proxy que contém essa política.

Nome do erro Causa Correção
InvalidResourceUrlFormat Se o formato do URL de recurso especificado em <ResourceURL> ou o elemento <IncludeURL> da política JavaScript for inválido, a implantação do proxy de API falhará.
InvalidResourceUrlReference Se os elementos <ResourceURL> ou <IncludeURL> se referirem a um arquivo JavaScript que não existe, a implantação do proxy da API falhará. O arquivo de origem referenciado precisa existir no proxy, no ambiente ou no nível da organização da API.
WrongResourceType Esse erro ocorrerá durante a implantação se os elementos <ResourceURL> ou <IncludeURL> da política JavaScript se referirem a qualquer tipo de recurso diferente de jsc (arquivo JavaScript).
NoResourceURLOrSource A implantação da política JavaScript pode falhar com esse erro se o elemento <ResourceURL> não for declarado ou se o URL do recurso não estiver definido nesse elemento. O elemento <ResourceURL> é obrigatório. Ou o elemento <IncludeURL> é declarado, mas o URL do recurso não está definido nesse elemento. O elemento <IncludeURL> é opcional, mas, se declarado, o URL do recurso precisa ser especificado no elemento <IncludeURL>.

Variáveis de falha

Essas variáveis são definidas quando essa política aciona um erro no ambiente de execução. Para mais informações, consulte O que você precisa saber sobre erros de política.

Variáveis Onde Exemplo
fault.name="fault_name" fault_name é o nome da falha, conforme listado na tabela Erros de ambiente de execução acima. O nome da falha é a última parte do código de falha. fault.name Matches "ScriptExecutionFailed"
javascript.policy_name.failed policy_name é o nome especificado pelo usuário da política que causou a falha. javascript.JavaScript-1.failed = true

Exemplo de resposta de erro

{
  "fault": {
    "faultstring": "Execution of SetResponse failed with error: Javascript runtime error: "ReferenceError: "status" is not defined. (setresponse.js:6)\"",
    "detail": {
      "errorcode": "steps.javascript.ScriptExecutionFailed"
    }
  }
}

Exemplo de regra de falha

<FaultRule name="JavaScript Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ScriptExecutionFailed") </Condition>
    </Step>
    <Condition>(javascript.JavaScript-1.failed = true) </Condition>
</FaultRule>

Política JSONThreatProtection

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
steps.jsonthreatprotection.ExecutionFailed 500 The JSONThreatProtection policy can throw many different types of ExecutionFailed errors. Most of these errors occur when a specific threshold set in the policy is exceeded. These types of errors include: object entry name length, object entry count, array element count, container depth, string string value length. This error also occurs when the payload contains an invalid JSON object.
steps.jsonthreatprotection.SourceUnavailable 500 This error occurs if the message variable specified in the <Source> element is either:
  • Out of scope (not available in the specific flow where the policy is being executed)
  • Is not one of the valid values request, response, or message
steps.jsonthreatprotection.NonMessageVariable 500 This error occurs if the <Source> element is set to a variable which is not of type message.

Deployment errors

None.

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "SourceUnavailable"
jsonattack.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. jsonattack.JTP-SecureRequest.failed = true

Example error response

{
  "fault": {
    "faultstring": "JSONThreatProtection[JPT-SecureRequest]: Execution failed. reason: JSONThreatProtection[JTP-SecureRequest]: Exceeded object entry name length at line 2",
    "detail": {
      "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
    }
  }
}

Example fault rule

<FaultRule name="JSONThreatProtection Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ExecutionFailed") </Condition>
    </Step>
    <Condition>(jsonattack.JPT-SecureRequest.failed = true) </Condition>
</FaultRule>

Os tipos de políticas JSONThreatProtection definem os seguintes códigos de erro:

Política JSONtoXML

Nesta seção, descrevemos os códigos e as mensagens de erro retornados e as variáveis de falha definidas pelo Edge quando a política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para lidar com falhas. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Esses erros podem ocorrer quando a política é executada.

Código de falha Status HTTP Causa Correção
steps.jsontoxml.ExecutionFailed 500 O payload de entrada (JSON) está vazio ou a entrada (JSON) transmitida para a política JSON para XML é inválida ou está malformada.
steps.jsontoxml.InCompatibleTypes 500 Esse erro ocorrerá se o tipo da variável definido no elemento <Source> e o elemento <OutputVariable> não forem os mesmos. É obrigatório que o tipo das variáveis contidas no elemento <Source> e no elemento <OutputVariable> seja igual. Os tipos válidos são message e string.
steps.jsontoxml.InvalidSourceType 500 Este erro ocorrerá se o tipo da variável usado para definir o elemento <Source> for inválido. Os tipos válidos de variável são message e string.
steps.jsontoxml.OutputVariableIsNotAvailable 500 Esse erro ocorrerá se a variável especificada no elemento <Source> da política JSON para XML for do tipo string e o elemento <OutputVariable> não for definido. O elemento <OutputVariable> é obrigatório quando a variável definida no elemento <Source> é do tipo string.
steps.jsontoxml.SourceUnavailable 500 Esse erro ocorrerá se a variável message especificada no elemento <Source> da política JSON para XML se enquadrar em uma destas situações:
  • fora do escopo (não disponível no fluxo específico em que a política está sendo executada) ou
  • não é possível resolver (não está definida)

Erros de implantação

Nenhum.

Variáveis de falha

Essas variáveis são definidas quando ocorre um erro de tempo de execução. Para mais informações, consulte O que você precisa saber sobre erros de política.

Variáveis Onde Exemplo
fault.name="fault_name" fault_name é o nome da falha, conforme listado na tabela Erros de ambiente de execução acima. O nome da falha é a última parte do código de falha. fault.name Matches "SourceUnavailable"
jsontoxml.policy_name.failed policy_name é o nome especificado pelo usuário da política que causou a falha. jsontoxml.JSON-to-XML-1.failed = true

Exemplo de resposta de erro

{
  "fault": {
    "faultstring": "JSONToXML[JSON-to-XML-1]: Source xyz is not available",
    "detail": {
      "errorcode": "steps.json2xml.SourceUnavailable"
    }
  }
}

Exemplo de regra de falha

<FaultRule name="JSON To XML Faults">
    <Step>
        <Name>AM-SourceUnavailableMessage</Name>
        <Condition>(fault.name Matches "SourceUnavailable") </Condition>
    </Step>
    <Step>
        <Name>AM-BadJSON</Name>
        <Condition>(fault.name = "ExecutionFailed")</Condition>
    </Step>
    <Condition>(jsontoxml.JSON-to-XML-1.failed = true) </Condition>
</FaultRule>

Política KeyValueMapOperations

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
steps.keyvaluemapoperations.SetVariableFailed 500

This error occurs if you try to retrieve a value from an encrypted key value map and set the value to a variable whose name does not have the prefix private. The prefix, which is required for basic security purposes during debugging, hides the encrypted values from API proxy Trace and debug sessions.
steps.keyvaluemapoperations.UnsupportedOperationException 500

This error occurs if the mapIdentifier attribute is set to empty string in the Key Value Map Operations policy.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
InvalidIndex If the index attribute specified in the <Get> element of Key Value Map Operations policy is zero or a negative number, then the deployment of the API proxy fails. The index starts from 1, so an index of zero or negative integer is considered as invalid.
KeyIsMissing This error occurs if the <Key> element is completely missing or <Parameter> element is missing within <Key> element underneath the <Entry> of the <InitialEntries> element of the Key Value Map Operations policy.
ValueIsMissing This error occurs if the <Value> element is missing underneath the <Entry> element of the <InitialEntries> element of the Key Value Map Operations policy.

Política LDAP

This policy uses the following error codes:

Error Code Message
InvalidAttributeName Invalid attribute name {0}.
InvalidSearchBase Search base can not be empty.
InvalidValueForPassword Invalid value for password field. It can not be empty.
InvalidSearchScope Invalid scope {0}. Allowed scopes are {1}.
InvalidUserCredentials Invalid user credentials.
InvalidExternalLdapReference Invalid external ldap reference {0}.
LdapResourceNotFound Ldap resource {0} not found.
BaseDNRequired Base DN required.
OnlyReferenceOrValueIsAllowed Only value or reference is allowed for {0}.
AttributesRequired At least one attribute required for search action.
UserNameIsNull User name is null.
SearchQueryAndUserNameCannotBePresent Both search query and username can not be present in the authentication action. Please specify either one of them.

Política MessageLogging

Nesta seção, descrevemos os códigos e as mensagens de erro retornados e as variáveis de falha definidas pelo Edge quando a política aciona um erro. Essas informações são importantes para saber se você está desenvolvendo regras de falha para lidar com falhas. Para saber mais, consulte O que você precisa saber sobre erros de política e Como lidar com falhas.

Erros de execução

Esses erros podem ocorrer quando a política é executada.

Código de falha Status HTTP Causa
steps.messagelogging.StepDefinitionExecutionFailed 500 Consulte string de falha.

Erros de implantação

Esses erros podem ocorrer quando você implanta um proxy que contém essa política.

Erro de nome Causa Correção
InvalidProtocol A implantação da política MessageLogging poderá falhar com esse erro se o protocolo especificado no elemento <Protocol> não for válido. Os protocolos válidos são TCP e UDP. Para enviar mensagens syslog por TLS/SSL, apenas TCP é aceito.
InvalidPort A implantação da política MessageLogging poderá falhar com esse erro se o número da porta não for especificado no elemento <Port> ou se não for válido. O número da porta precisa ser um número inteiro maior que zero.

Variáveis de falha

Essas variáveis são definidas quando ocorre um erro de tempo de execução. Para mais informações, consulte O que você precisa saber sobre erros de política.

Variáveis Onde Exemplo
fault.name="fault_name" fault_name é o nome da falha, conforme listado na tabela Erros de ambiente de execução acima. O nome da falha é a última parte do código de falha. fault.name Matches "StepDefinitionExecutionFailed"
messagelogging.policy_name.failed policy_name é o nome especificado pelo usuário da política que causou a falha. messagelogging.ML-LogMessages.failed = true

Exemplo de resposta de erro

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.messagelogging.StepDefinitionExecutionFailed"
      },
      "faultstring":"Execution failed"
   }
}

Exemplo de regra de falha

<FaultRule name="MessageLogging">
    <Step>
        <Name>ML-LogMessages</Name>
        <Condition>(fault.name Matches "StepDefinitionExecutionFailed") </Condition>
    </Step>
    <Condition>(messagelogging.ML-LogMessages.failed = true) </Condition>
</FaultRule>

Política OASValidation

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause
steps.oasvalidation.Failed 500 Request message body cannot be validated against the provided OpenAPI Specification.
steps.oasvalidation.SourceMessageNotAvailable 500

Variable specified in the <Source> element of the policy is either out of scope or cannot be resolved.
steps.oasvalidation.NotMessageVariable 500

<Source> element is set to a variable that is not of type message.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause
ResourceDoesNotExist OpenAPI Specification referenced in the <OASResource> element does not exist.
ResourceCompileFailed OpenAPI Specification that is included in the deployment contains errors that prevent it from being compiled. This generally indicates that the specification is not a well-formed OpenAPI Specification 3.0.
BadResourceURL OpenAPI Specification referenced in the <OASResource> element cannot be processed. This can occur if the file is not a JSON or YAML file or the file URL is not specified correctly.

Fault variables

These variables are set when this policy triggers an error at runtime. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "ResourceDoesNotExist"
oasvalidation.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. oasvalidation.myoaspolicy.failed = true

Política PopulateCache

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP Status Occurs when
policies.populatecache.EntryCannotBeCached 500 An entry cannot be cached. The message object being cached is not an instance of a class that is Serializable.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
InvalidCacheResourceReference This error occurs if the <CacheResource> element in the PopulateCache policy is set to a name that does not exist in the environment where the API proxy is being deployed.
CacheNotFound The cache specified in the <CacheResource> element does not exist.

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name = "EntryCannotBeCached"
populatecache.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. populatecache.POP-CACHE-1.failed = true

Example error response

{
  "fault": {
    "faultstring": "[entry] can not be cached. Only serializable entries are cached.",
    "detail": {
      "errorcode": "steps.populatecache.EntryCannotBeCached"
    }
  }
}

Example fault rule

<FaultRule name="Populate Cache Fault">
    <Step>
        <Name>AM-EntryCannotBeCached</Name>
        <Condition>(fault.name Matches "EntryCannotBeCached") </Condition>
    </Step>
    <Condition>(populatecache.POP-CACHE-1.failed = true) </Condition>
</FaultRule>

Política LookupCache

This section describes the error messages and flow variables that are set when this policy triggers an error. This information is important to know if you are developing fault rules for a proxy. To learn more, see What you need to know about policy errors and Handling faults.

Error code prefix

N/A

Runtime errors

This policy does not throw any runtime errors.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
InvalidCacheResourceReference This error occurs if the <CacheResource> element is set to a name which does not exist in the environment where the API proxy is being deployed.
InvalidTimeout If the <CacheLookupTimeoutInSeconds> element is set to a negative number, then the deployment of the API proxy fails.
CacheNotFound This error occurs if the specific cache mentioned in the error message has not been created on a specific Message Processor component.

Fault variables

N/A

Example error response

N/A

Política InvalidateCache

This section describes the error messages and flow variables that are set when this policy triggers an error. This information is important to know if you are developing fault rules for a proxy. To learn more, see What you need to know about policy errors and Handling faults.

Error code prefix

N/A

Runtime errors

This policy does not throw any runtime errors.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
InvalidCacheResourceReference This error occurs if the <CacheResource> element in the InvalidateCache policy is set to a name that does not exist in the environment where the API proxy is being deployed.
CacheNotFound This error occurs if the specific cache mentioned in the error message has not been created on a specific Message Processor component.

Fault variables

N/A

Example error response

N/A

Política ResponseCache

This section describes the error messages and flow variables that are set when this policy triggers an error. This information is important to know if you are developing fault rules for a proxy. To learn more, see What you need to know about policy errors and Handling faults.

Error code prefix

N/A

Runtime errors

This policy does not throw any runtime errors.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
InvalidTimeout If the <CacheLookupTimeoutInSeconds> element of the ResponseCache policy is set to a negative number, then the deployment of the API proxy fails.
InvalidCacheResourceReference This error occurs if the <CacheResource> element in a ResponseCache policy is set to a name that does not exist in the environment where the API proxy is being deployed.
ResponseCacheStepAttachmentNotAllowedReq This error occurs if the same ResponseCache policy is attached to multiple request paths within any flows of an API proxy.
ResponseCacheStepAttachmentNotAllowedResp This error occurs if the same ResponseCache policy is attached to multiple response paths within any flows of an API proxy.
InvalidMessagePatternForErrorCode This error occurs if either the <SkipCacheLookup> or the <SkipCachePopulation> element in a ResponseCache policy contains an invalid condition.
CacheNotFound This error occurs if the specific cache mentioned in the error message has not been created on a specific Message Processor component.

Fault variables

N/A

Example error response

N/A

Política do OAuthV2

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Thrown by operations
steps.oauth.v2.access_token_expired 401 The access token is expired.

VerifyAccessToken
InvalidateToken
steps.oauth.v2.access_token_not_approved 401 The access token was revoked. VerifyAccessToken
steps.oauth.v2.apiresource_doesnot_exist 401 The requested resource does not exist any of the API products associated with the access token. VerifyAccessToken
steps.oauth.v2.FailedToResolveAccessToken 500 The policy expected to find an access token in a variable specified in the <AccessToken> element, but the variable could not be resolved. GenerateAccessToken
steps.oauth.v2.FailedToResolveAuthorizationCode 500 The policy expected to find an authorization code in a variable specified in the <Code> element, but the variable could not be resolved. GenerateAuthorizationCode
steps.oauth.v2.FailedToResolveClientId 500 The policy expected to find the Client ID in a variable specified in the <ClientId> element, but the variable could not be resolved. GenerateAccessToken
GenerateAuthorizationCode
GenerateAccessTokenImplicitGrant
RefreshAccessToken
steps.oauth.v2.FailedToResolveRefreshToken 500 The policy expected to find a refresh token in a variable specified in the <RefreshToken> element, but the variable could not be resolved. RefreshAccessToken
steps.oauth.v2.FailedToResolveToken 500 The policy expected to find a token in a variable specified in the <Tokens> element, but the variable could not be resolved.

ValidateToken
InvalidateToken
steps.oauth.v2.InsufficientScope 403 The access token presented in the request has a scope that does not match the scope specified in the verify access token policy. To learn about scope, see Working with OAuth2 scopes. VerifyAccessToken
steps.oauth.v2.invalid_access_token 401 The access token sent from the client is invalid. VerifyAccessToken
steps.oauth.v2.invalid_client 401

This error name is returned when the <GenerateResponse> property of the policy is set to true and the client ID sent in the request is invalid. Check to be sure you are using the correct client key and secret values for the Developer App associated with your proxy. Typically, these values are sent as a Base64 encoded Basic Authorization header.

Note: It is recommended that you change existing fault rule conditions to catch both the invalid_client and InvalidClientIdentifier names. See the 16.09.21 Release Notes for more information and an example.

 GenerateAccessToken
RefreshAccessToken
steps.oauth.v2.InvalidRequest 400 This error name is used for multiple different kinds of errors, typically for missing or incorrect parameters sent in the request. If <GenerateResponse> is set to false, use fault variables (described below) to retrieve details about the error, such as the fault name and cause. GenerateAccessToken
GenerateAuthorizationCode
GenerateAccessTokenImplicitGrant
RefreshAccessToken
steps.oauth.v2.InvalidAccessToken 401 The authorization header does not have the word "Bearer", which is required. For example: Authorization: Bearer your_access_token VerifyAccessToken
steps.oauth.v2.InvalidAPICallAsNoApiProductMatchFound 401

The API proxy is not in the Product associated with the access token.

Tips: Be sure that the product associated with the access token is configured correctly. For example, if you use wildcards in resource paths, be sure the wildcards are being used correctly. See Create API products for details.

See also this Apigee Community post for more guidance on causes for this error.

VerifyAccessToken
steps.oauth.v2.InvalidClientIdentifier 500

This error name is returned when the <GenerateResponse> property of the policy is set to false and the client ID sent in the request is invalid. Check to be sure you are using the correct client key and secret values for the Developer App associated with your proxy. Typically, these values are sent as a Base64 encoded Basic Authorization header.

Note: In this situation, this error used to be called invalid_client. It is recommended that you change existing fault rule conditions to catch both the invalid_client and InvalidClientIdentifier names. See the 16.09.21 Release Notes for more information and an example.

GenerateAccessToken
RefreshAccessToken
steps.oauth.v2.InvalidParameter 500 The policy must specify either an access token or an authorization code, but not both. GenerateAuthorizationCode
GenerateAccessTokenImplicitGrant
steps.oauth.v2.InvalidTokenType 500 The <Tokens>/<Token> element requires you to specify the token type (for example, refreshtoken). If the client passes the wrong type, this error is thrown. ValidateToken
InvalidateToken
steps.oauth.v2.MissingParameter 500 The response type is token, but no grant types are specified. GenerateAuthorizationCode
GenerateAccessTokenImplicitGrant
steps.oauth.v2.UnSupportedGrantType 500

The client specified a grant type that is unsupported by the policy (not listed in the <SupportedGrantTypes> element).

Note: There is currently a bug where unsupported grant type errors are not thrown correctly. If an unsupported grant type error occurs, the proxy does not enter the Error Flow, as expected.

 GenerateAccessToken
GenerateAuthorizationCode
GenerateAccessTokenImplicitGrant
RefreshAccessToken

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause
InvalidValueForExpiresIn

For the <ExpiresIn> element, valid values are positive integers and -1.
InvalidValueForRefreshTokenExpiresIn For the <RefreshTokenExpiresIn> element, valid values are positive integers and -1.
InvalidGrantType An invalid grant type is specified in the <SupportedGrantTypes> element. See the policy reference for a list of valid types.
ExpiresInNotApplicableForOperation Be sure that the operations specified in the <Operations> element support expiration. For example, the VerifyToken operation does not.
RefreshTokenExpiresInNotApplicableForOperation Be sure that the operations specified in the <Operations> element support refresh token expiration. For example, the VerifyToken operation does not.
GrantTypesNotApplicableForOperation Be sure that the grant types specified in <SupportedGrantTypes> are supported for the specified operation.
OperationRequired

You must specify an operation in this policy using the <Operation> element.

Note: If the <Operation> element is missing, the UI throws a schema validation error.
InvalidOperation

You must specify a valid operation in this policy using the <Operation> element.

Note: If the <Operation> element is invalid, the UI throws a schema validation error.
TokenValueRequired You must specify a token <Token> value in the <Tokens> element.

Fault variables

These variables are set when this policy triggers an error at runtime.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name = "InvalidRequest"
oauthV2.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. oauthV2.GenerateAccesstoken.failed = true
oauthV2.policy_name.fault.name policy_name is the user-specified name of the policy that threw the fault. oauthV2.GenerateAccesstoken.fault.name = InvalidRequest

Note: For the VerifyAccessToken operation, the fault name includes this suffix: keymanagement.service
For example: keymanagement.service.invalid_access_token
oauthV2.policy_name.fault.cause policy_name is the user-specified name of the policy that threw the fault. oauthV2.GenerateAccesstoken.cause = Required param : grant_type

Example error response

These responses are sent back to the client if the <GenerateResponse> element is true.

If <GenerateResponse> is true, the policy returns errors in this format for operations that generate tokens and codes. For a complete list, see see OAuth HTTP error response reference.

{"ErrorCode" : "invalid_client", "Error" :"ClientId is Invalid"}

If <GenerateResponse> is true, the policy returns errors in this format for verify and validate operations. For a complete list, see see OAuth HTTP error response reference.

{  
   {  
      "fault":{  
         "faultstring":"Invalid Access Token",
         "detail":{  
            "errorcode":"keymanagement.service.invalid_access_token"
         }
      }
   }

Example fault rule

<FaultRule name=OAuthV2 Faults">
    <Step>
        <Name>AM-InvalidClientResponse</Name>
        <Condition>(fault.name = "invalid_client") OR (fault.name = "InvalidClientIdentifier")</Condition>
    </Step>
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
        <Condition>(fault.name = "invalid_access_token")</Condition>
    </Step>
    <Condition>(oauthV2.failed = true) </Condition>
</FaultRule>

Política GetOAuthV2Info

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes. The error names shown below are the strings that are assigned to the fault.name variable when an error occurs. See the Fault variables section below for more details.

Fault code HTTP status Cause
steps.oauth.v2.access_token_expired 500 The access token sent to the policy is expired.
steps.oauth.v2.authorization_code_expired 500 The authorization code sent to the policy is expired.
steps.oauth.v2.invalid_access_token 500 The access token sent to the policy is invalid.
steps.oauth.v2.invalid_client-invalid_client_id 500 The client ID sent to the policy is invalid.
steps.oauth.v2.invalid_refresh_token 500 The refresh token sent to the policy is invalid.
steps.oauth.v2.invalid_request-authorization_code_invalid 500 The authorization code sent to the policy is invalid.
steps.oauth.v2.InvalidAPICallAsNoApiProductMatchFound 401 Please see this Apigee Community post for information about troubleshooting this error.
steps.oauth.v2.refresh_token_expired 500 The refresh token sent to the policy is expired.

Deployment errors

Refer to the message reported in the UI for information about deployment errors.

Fault variables

These variables are set when this policy triggers an error at runtime.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "IPDeniedAccess"
oauthV2.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. oauthV2.GetTokenInfo.failed = true
oauthV2.policy_name.fault.name policy_name is the user-specified name of the policy that threw the fault. oauthV2.GetToKenInfo.fault.name = invalid_client-invalid_client_id
oauthV2.policy_name.fault.cause policy_name is the user-specified name of the policy that threw the fault. oauthV2.GetTokenInfo.cause = ClientID is Invalid

Example error response

{  
   "fault":{  
      "faultstring":"ClientId is Invalid",
      "detail":{  
         "errorcode":"keymanagement.service.invalid_client-invalid_client_id"
      }
   }
}

Example fault rule

<FaultRule name="OAuthV2 Faults">
    <Step>
        <Name>AM-InvalidClientIdResponse</Name>
    </Step>
    <Condition>(fault.name = "invalid_client-invalid_client_id")</Condition>
</FaultRule>

Política SetOAuthV2Info

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause
steps.oauth.v2.access_token_expired 500 The access token sent to the policy is expired.
steps.oauth.v2.invalid_access_token 500 The access token sent to the policy is invalid.
steps.oauth.v2.InvalidAPICallAsNoApiProductMatchFound 401 Please see this Apigee Community post for information about troubleshooting this error.

Deployment errors

Refer to the message reported in the UI for information about deployment errors.

Fault variables

These variables are set when this policy triggers an error at runtime.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name = "invalid_access_token"
oauthV2.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. oauthV2.SetTokenInfo.failed = true
oauthV2.policy_name.fault.name policy_name is the user-specified name of the policy that threw the fault. oauthV2.SetTokenInfo.fault.name = invalid_access_token
oauthv2.policy_name.fault.cause policy_name is the user-specified name of the policy that threw the fault. oauthV2.SetTokenInfo.cause = Invalid Access Token

Example error response

{
  "fault": {
    "faultstring": "Invalid Access Token",
    "detail": {
      "errorcode": "keymanagement.service.invalid_access_token"
    }
  }
}

Example fault rule

<FaultRule name=SetOAuthV2Info Faults">
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
        <Condition>(fault.name = "invalid_access_token")</Condition>
    </Step>
    <Condition>(oauthV2.failed = true) </Condition>
</FaultRule>

Política DeleteOAuthV2Info

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause
steps.oauth.v2.invalid_access_token 401 The access token sent to the policy is invalid.
steps.oauth.v2.invalid_request-authorization_code_invalid 401 The authorization code sent to the policy is invalid.
steps.oauth.v2.InvalidAPICallAsNoApiProductMatchFound 401 Please see this Apigee Community post for information about troubleshooting this error.

Deployment errors

Refer to the message reported in the UI for information about deployment errors.

Fault variables

These variables are set when this policy triggers an error at runtime.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name = "invalid_access_token"
oauthV2.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. oauthV2.DeleteTokenInfo.failed = true
oauthV2.policy_name.fault.name policy_name is the user-specified name of the policy that threw the fault. oauthV2.DeleteTokenInfo.fault.name = invalid_access_token
oauthv2.policy_name.fault.cause policy_name is the user-specified name of the policy that threw the fault. oauthV2.DeleteTokenInfo.cause = Invalid Access Token

Example error response

{
  "fault": {
    "faultstring": "Invalid Access Token",
    "detail": {
      "errorcode": "keymanagement.service.invalid_access_token"
    }
  }
}

Example fault rule

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="DeleteOAuthV2Info_Faults">
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
    </Step>
    <Condition>(fault.name = "invalid_access_token")</Condition>
</FaultRule>

Política do OAuthv1.0a

The OAuthV1 Policy type defines the following error codes.

For OAuth-related HTTP error codes, see OAuth HTTP error response reference.

Error Code Message
AppKeyNotResolved Could not resolve the app key with variable {0}
ConsumerKeyNotResolved Could not resolve the consumer key with variable {0}
RequestTokenNotResolved Could not resolve the request token with the variable {0}
AccessTokenNotResolved Could not resolve the access token with the variable {0}
ResponseGenerationError Error while generating response : {0}
UnableToDetermineOperation Unable to determine an operation for stepDefinition {0}
UnableToResolveOAuthConfig Unable to resolve the OAuth configuration for {0}
AtLeastOneParamRequired At least one of AccessToken, RequestToken or ConsumerKey must be specified in stepDefinition {0}
SpecifyValueOrRefReqToken Specify Request Token as value or ref in stepDefinition {0}
SpecifyValueOrRefAccToken Specify Access Token as value or ref in stepDefinition {0}
SpecifyValueOrRefConKey Specify Consumer Key as value or ref in stepDefinition {0}
SpecifyValueOrRefAppKey Specify App Key as value or ref in stepDefinition {0}
ExpiresInNotApplicableForOperation ExpiresIn element is not valid for operation {0}
InvalidValueForExpiresIn Invalid value for ExpiresIn element for operation {0}
FailedToFetchApiProduct Failed to fetch api product for key {0}
InvalidTokenType Valid token types : {0}, Invalid toke type {1} in stepDefinition {2}
TokenValueRequired Token value is required in stepDefinition {0}
FailedToResolveRealm Failed to resolve realm {0}

Política GetOAuthV1Info

Nenhum código de erro foi especificado para a política "Ver informações do OAuth v1.0a".

Política DeleteOAuthV1Info

On success, the policy returns a 200 status.

On failure, the policy returns 404 and output similar to the following (depending on whether you are deleting an access token, request token, or verifier.):

HTTP/1.1 404 Not Found
Content-Type: application/json
Content-Length: 144
Connection: keep-alive

{"fault":{"faultstring":"Invalid Access Token","detail":{"errorcode":"keymanagement.service.invalid_request-access_token_invalid"}}}

Política PythonScript

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
steps.script.ScriptEvaluationFailed 500 The PythonScript policy can throw several different types of ScriptExecutionFailed errors. Commonly seen types of errors include NameError and ZeroDivisionError.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
InvalidResourceUrlFormat If the format of the resource URL specified within the <ResourceURL> or the <IncludeURL> element of the PythonScript policy is invalid, then the deployment of the API proxy fails.
InvalidResourceUrlReference If the <ResourceURL> or the <IncludeURL> elements refer to a PythonScript file that does not exist, then the deployment of the API proxy fails. The referenced source file must exist either the API proxy, environment, or organization level.

Fault variables

These variables are set when this policy triggers an error at runtime. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "ScriptExecutionFailed"
pythonscript.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. pythonscript.PythonScript-1.failed = true

Example error response

{
  "fault": {
    "faultstring": "Execution of SetResponse failed with error: Pythonscript runtime error: "ReferenceError: "status" is not defined.\"",
    "detail": {
      "errorcode": "steps.script.ScriptExecutionFailed"
    }
  }
}

Example fault rule

<FaultRule name="PythonScript Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ScriptExecutionFailed") </Condition>
    </Step>
    <Condition>(pythonscript.PythonScript-1.failed = true) </Condition>
</FaultRule>

Política de cotas

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
policies.ratelimit.FailedToResolveQuotaIntervalReference 500 Occurs if the <Interval> element is not defined within the Quota policy. This element is mandatory and used to specify the interval of time applicable to the quota. The time interval can be minutes, hours, days, weeks, or months as defined with the <TimeUnit> element.
policies.ratelimit.FailedToResolveQuotaIntervalTimeUnitReference 500 Occurs if the <TimeUnit> element is not defined within the Quota policy. This element is mandatory and used to specify the unit of time applicable to the quota. The time interval can be in minutes, hours, days, weeks, or months.
policies.ratelimit.InvalidMessageWeight 500 Occurs if the value of the <MessageWeight> element specified through a flow variable is invalid (a non-integer value).
policies.ratelimit.QuotaViolation 500 The quota limit was exceeded. N/A

Deployment errors

Error name Cause Fix
InvalidQuotaInterval If the quota interval specified in the <Interval> element is not an integer, then the deployment of the API proxy fails. For example, if the quota interval specified is 0.1 in the <Interval> element, then the deployment of the API proxy fails.
InvalidQuotaTimeUnit If the time unit specified in the <TimeUnit> element is unsupported, then the deployment of the API proxy fails. The supported time units are minute, hour, day, week, and month.
InvalidQuotaType If the type of the quota specified by the type attribute in the <Quota> element is invalid, then the deployment of the API proxy fails. The supported quota types are default, calendar, flexi, and rollingwindow.
InvalidStartTime If the format of the time specified in the <StartTime> element is invalid, then the deployment of the API proxy fails. The valid format is yyyy-MM-dd HH:mm:ss, which is the ISO 8601 date and time format. For example, if the time specified in the <StartTime> element is 7-16-2017 12:00:00 then the deployment of the API proxy fails.
StartTimeNotSupported If the <StartTime> element is specified whose quota type is not calendar type, then the deployment of the API proxy fails. The <StartTime> element is supported only for the calendar quota type. For example, if the type attribute is set to flexi or rolling window in the <Quota> element, then the deployment of the API proxy fails.
InvalidTimeUnitForDistributedQuota If the <Distributed> element is set to true and the <TimeUnit> element is set to second then the deployment of the API proxy fails. The timeunit second is invalid for a distributed quota.
InvalidSynchronizeIntervalForAsyncConfiguration If the value specified for the <SyncIntervalInSeconds> element within the <AsynchronousConfiguration> element in a Quota policy is less than zero, then the deployment of the API proxy fails.
InvalidAsynchronizeConfigurationForSynchronousQuota If the value of the <AsynchronousConfiguration> element is set to true in a Quota policy, which also has asynchronous configuration defined using the <AsynchronousConfiguration> element, then the deployment of the API proxy fails.

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "QuotaViolation"
ratelimit.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. ratelimit.QT-QuotaPolicy.failed = true

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"policies.ratelimit.QuotaViolation"
      },
      "faultstring":"Rate limit quota violation. Quota limit  exceeded. Identifier : _default"
   }
}

Example fault rule

<FaultRules>
    <FaultRule name="Quota Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "QuotaViolation") </Condition>
        </Step>
        <Condition>ratelimit.Quota-1.failed=true</Condition>
    </FaultRule>
</FaultRules>

Política ResetQuota

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
policies.resetquota.InvalidRLPolicy 500 The Quota policy specified in the <Quota> element of the Reset Quota policy is not defined in the API proxy and thus is not available during the flow. The <Quota> element is mandatory and identifies the target Quota policy whose counter should be updated through the Reset Quota policy.
policies.resetquota.FailedToResolveAllowCountRef N/A The reference to the variable containing the allow count in the <Allow> element of the policy cannot be resolved to a value. This element is mandatory and specifies the amount to decrease the quota counter.
policies.resetquota.FailedToResolveRLPolicy 500 The variable referenced by the ref attribute in the <Quota> element cannot be resolved.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
InvalidCount If the count value specified in the <Allow> element of the Reset Quota Policy is not an integer, then the deployment of the API proxy fails.

Política RaiseFault

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause
steps.raisefault.RaiseFault 500 See fault string.

Deployment errors

None.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name = "RaiseFault"
raisefault.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. raisefault.RF-ThrowError.failed = true

Example error response

{
   "fault":{
      "detail":{
         "errorcode":"steps.raisefault.RaiseFault"
      },
      "faultstring":"Raising fault. Fault name: [name]"
   }
}

Política RegularExpressionProtection

This section describes the error codes and messages returned and fault variables set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. If you want to capture an error and raise your own custom error, set the continueOnError="true" attribute on the policy root element. To learn more, see What you need to know about policy errors and Handling faults.

Errors returned from Edge policies follow a consistent format as described in the Error code reference.

Runtime errors

These errors can occur when the policy executes.

Error Code Message
ExecutionFailed Failed to execute the RegularExpressionProtection StepDefinition {0}. Reason: {1}
InstantiationFailed Failed to instantiate the RegularExpressionProtection StepDefinition {0}
NonMessageVariable Variable {0} does not resolve to a Message
SourceMessageNotAvailable {0} message is not available for RegularExpressionProtection StepDefinition {1}
ThreatDetected Regular Expression Threat Detected in {0}: regex: {1} input: {2}
VariableResolutionFailed Failed to resolve variable {0}

Deployment errors

Error Code Message Fix
CannotBeConvertedToNodeset RegularExpressionProtection {0}: Result of xpath {1} cannot be converted to nodeset. Context {2}
DuplicatePrefix RegularExpressionProtection {0}: Duplicate prefix {1}
EmptyJSONPathExpression RegularExpressionProtection {0}: Empty JSONPath expression
EmptyXPathExpression RegularExpressionProtection {0}: Empty XPath expression
InvalidRegularExpression RegularExpressionProtection {0}: Invalid Regular Expression {1}, Context {2}
JSONPathCompilationFailed RegularExpressionProtection {0}: Failed to compile jsonpath {1}. Context {2}
NONEmptyPrefixMappedToEmptyURI RegularExpressionProtection {0}: Non-empty prefix {1} cannot be mapped to empty uri
NoPatternsToEnforce RegularExpressionProtection {0}: No patterns to enforce in {1}
NothingToEnforce RegularExpressionProtection {0}: at least one of URIPath, QueryParam, Header, FormParam, XMLPayload, JSONPayload is mandatory
XPathCompilationFailed RegularExpressionProtection {0}: Failed to compile xpath {1}. Context {2}

Fault variables

These variables are set when this policy triggers an error. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the table above. fault.name Matches "ThreatDetected"
regularexpressionprotection.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. regularexpressionprotection.Regular-Expressions-Protection-1.failed = true

Política SOAPMessageValidation

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
steps.messagevalidation.SourceMessageNotAvailable 500

This error occurs if a variable specified in the <Source> element of the policy is either:

  • out of scope (not available in the specific flow where the policy is being executed)
    • or
  • can't be resolved (is not defined)
steps.messagevalidation.NonMessageVariable 500

This error occurs if the <Source> element in the SOAPMessageValidation policy is set to a variable which is not of type message.

Message type variables represent entire HTTP requests and responses. The built-in Edge flow variables request, response, and message are of type message. To learn more about message variables, see the Variables reference.
steps.messagevalidation.Failed 500 This error occurs if the SOAPMessageValidation policy fails to validate the input message payload against the XSD schema or WSDL definition. It will also occur if there is malformed JSON or XML in the payload message.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
InvalidResourceType The <ResourceURL> element in the SOAPMessageValidation policy is set to a resource type not supported by the policy.
ResourceCompileFailed The resource script referenced in the <ResourceURL> element of the SOAPMessageValidation policy contains an error that prevents it from compiling.
RootElementNameUnspecified The <Element> element in the SOAPMessageValidation policy does not contain the root element's name.
InvalidRootElementName The <Element> element in the SOAPMessageValidation policy contains a root element name that does not adhere to XML rules for valid element naming.

Política SAMLAssertion

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
SourceNotConfigured One or more of the following elements of the Validate SAML Assertion policy is not defined or empty: <Source>, <XPath>, <Namespaces>, <Namespace>.
TrustStoreNotConfigured If the <TrustStore> element is empty or not specified in the ValidateSAMLAssertion policy, then the deployment of the API proxy fails. A valid Trust Store is required.
NullKeyStoreAlias If the child element <Alias> is empty or not specified in the <Keystore> element of Generate SAML Assertion policy, then the deployment of the API proxy fails. A valid Keystore alias is required.
NullKeyStore If the child element <Name> is empty or not specified in the <Keystore> element of GenerateSAMLAssertion policy, then the deployment of the API proxy fails. A valid Keystore name is required.
NullIssuer If the <Issuer> element is empty or not specified in the Generate SAML Assertion policy, then the deployment of the API proxy fails. A valid <Issuer> value is required.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault. The fault name is the last part of the fault code. fault.name = "InvalidMediaTpe"
GenerateSAMLAssertion.failed For a validate SAML assertion policy configuration, the error prefix is ValidateSAMLAssertion. GenerateSAMLAssertion.failed = true

Example error response

{
  "fault": {
    "faultstring": "GenerateSAMLAssertion[GenSAMLAssert]: Invalid media type",
    "detail": {
      "errorcode": "steps.saml.generate.InvalidMediaTpe"
    }
  }
}

Example fault rule

<FaultRules>
    <FaultRule name="invalid_saml_rule">
        <Step>
            <Name>invalid-saml</Name>
        </Step>
        <Condition>(GenerateSAMLAssertion.failed = "true")</Condition>
    </FaultRule>
</FaultRules>

Política ServiceCallout

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
steps.servicecallout.ExecutionFailed 500

This error can occur when:

  • the policy is asked to handle input that is malformed or otherwise invalid.
  • the backend target service returns an error status (by default, 4xx or 5xx).
steps.servicecallout.RequestVariableNotMessageType 500 The Request variable specified in the policy is not of type Message. For example, if it's a string or other non-message type, you'll see this error.
steps.servicecallout.RequestVariableNotRequestMessageType 500 The Request variable specified in the policy is not of type Request Message. For example, if it's a Response type, you'll see this error.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
URLMissing The <URL> element inside <HTTPTargetConnection> is missing or empty.
ConnectionInfoMissing This error happens if the policy does not have an <HTTPTargetConnection> or <LocalTargetConnection> element.
InvalidTimeoutValue This error happens if the <Timeout> value is negative or zero.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name = "RequestVariableNotMessageType"
servicecallout.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. servicecallout.SC-GetUserData.failed = true

Example error response

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.servicecallout.RequestVariableNotMessageType"
      },
      "faultstring":"ServiceCallout[ServiceCalloutGetMockResponse]: 
            request variable data_str value is not of type Message"
   }
}

Example fault rule

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="RequestVariableNotMessageType">
    <Step>
        <Name>AM-RequestVariableNotMessageType</Name>
    </Step>
    <Condition>(fault.name = "RequestVariableNotMessageType")</Condition>
</FaultRule>

Política de Detenção de pico

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
policies.ratelimit.FailedToResolveSpikeArrestRate 500 This error occurs if the reference to the variable containing the rate setting within the <Rate> element cannot be resolved to a value within the Spike Arrest policy. This element is mandatory and used to specify the spike arrest rate in the form of intpm or intps.
policies.ratelimit.InvalidMessageWeight 500 This error occurs if the value specified for the <MessageWeight> element through a flow variable is invalid (a non-integer value).
policies.ratelimit.SpikeArrestViolation 429

The rate limit was exceeded.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
InvalidAllowedRate If the spike arrest rate specified in the <Rate> element of the Spike Arrest Policy is not an integer or if the rate does not have ps or pm as a suffix, then the deployment of the API proxy fails.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "SpikeArrestViolation"
ratelimit.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. ratelimit.SA-SpikeArrestPolicy.failed = true

Example error response

Shown below is an example error response:

{  
   "fault":{  
      "detail":{  
         "errorcode":"policies.ratelimit.SpikeArrestViolation"
      },
      "faultstring":"Spike arrest violation. Allowed rate : 10ps"
   }
}

Example fault rule

Shown below is an example fault rule to handle a SpikeArrestViolation fault:

<FaultRules>
    <FaultRule name="Spike Arrest Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "SpikeArrestViolation") </Condition>
        </Step>
        <Condition>ratelimit.Spike-Arrest-1.failed=true</Condition>
    </FaultRule>
</FaultRules>

Política StatisticsCollector

This section describes the error messages and flow variables that are set when this policy triggers an error. This information is important to know if you are developing fault rules for a proxy. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

None.

Deployment errors

Error name Cause Fix
UnsupportedDatatype If the type of the variable specified by the ref attribute in the <Statistic> element of the Statistics Collector policy is unsupported, then the deployment of the API proxy fails. The supported data types are string, integer, float, long, double, and boolean.
InvalidName If the name used to reference the data collected for the specified variable defined within the <Statistic> element of the Statistics Collector policy conflicts with a system-defined variable, then the deployment of the API proxy fails. Some of the known system-defined variables are organization and environment.
DatatypeMissing If the type of the variable specified by the ref attribute in the <Statistic> element of the Statistics Collector policy is missing, then the deployment of the API proxy fails.

Fault variables

None.

Política VerifyAPIKey

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause
keymanagement.service.CompanyStatusNotActive 401 The Company associated with the Developer App that has the API key you are using has an inactive status. When a Company's status is set to inactive, you cannot access the developers or apps associated with that Company. An org admin can change a Company's status using the management API. See Set the Status of a Company.
keymanagement.service.DeveloperStatusNotActive 401

The developer who created the Developer App that has the API key you are using has an inactive status. When an App Developer's status is set to inactive, any Developer Apps created by that developer are deactivated. An admin user with appropriate permissions (such as Organization Administrator) can change a developer's status in the following ways:
keymanagement.service.invalid_client-app_not_approved 401 The Developer App associated with the API key is revoked. A revoked app cannot access any API products and cannot invoke any API managed by Apigee Edge. An org admin can change the status of a Developer App using the management API. See Approve or Revoke Developer App.
oauth.v2.FailedToResolveAPIKey 401 The policy expects to find the API key in a variable that is specified in the policy's <APIKey> element. This error arises when the expected variable does not exist (it cannot be resolved).
oauth.v2.InvalidApiKey 401 An API key was received by Edge, but it is invalid. When Edge looks up the key in its database, it must exactly match the on that was sent in the request. If the API worked previously, make sure the key was not regenerated. If the key was regenerated, you will see this error if you try to use the old key. For details, see Register apps and manage API keys.
oauth.v2.InvalidApiKeyForGivenResource 401 An API key was received by Edge, and it is valid; however, it does not match an approved key in the Developer App associated with your API proxy through a Product.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause
SpecifyValueOrRefApiKey The <APIKey> element does not have a value or key specified.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "FailedToResolveAPIKey"
oauthV2.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. oauthV2.VK-VerifyAPIKey.failed = true

Example error responses

{  
   "fault":{  
      "faultstring":"Invalid ApiKey",
      "detail":{  
         "errorcode":"oauth.v2.InvalidApiKey"
      }
   }
}
 
{  
   "fault":{  
      "detail":{  
         "errorcode":"keymanagement.service.DeveloperStatusNotActive"
      },
      "faultstring":"Developer Status is not Active"
   }
}

Example fault rule

<FaultRule name="FailedToResolveAPIKey">
    <Step>
        <Name>AM-FailedToResolveAPIKey</Name>
    </Step>
    <Condition>(fault.name Matches "FailedToResolveAPIKey") </Condition>
</FaultRule>

Política VerifyJWS

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Occurs when
steps.jws.AlgorithmInTokenNotPresentInConfiguration 401 Occurs when the verification policy has multiple algorithms
steps.jws.AlgorithmMismatch 401 The algorithm specified in the header by the Generate policy did not match the one expected in the Verify policy. The algorithms specified must match.
steps.jws.ContentIsNotDetached 401 <DetachedContent> is specified when the JWS does not contain a detached content payload.
steps.jws.FailedToDecode 401 The policy was unable to decode the JWS. The JWS is possibly corrupted.
steps.jws.InsufficientKeyLength 401 For a key less than 32 bytes for the HS256 algorithm
steps.jws.InvalidClaim 401 For a missing claim or claim mismatch, or a missing header or header mismatch.
steps.jws.InvalidCurve 401 The curve specified by the key is not valid for the Elliptic Curve algorithm.
steps.jws.InvalidJsonFormat 401 Invalid JSON found in the JWS header.
steps.jws.InvalidJws 401 This error occurs when the JWS signature verification fails.
steps.jws.InvalidPayload 401 The JWS payload is invalid.
steps.jws.InvalidSignature 401 <DetachedContent> is omitted and the JWS has a detached content payload.
steps.jws.KeyIdMissing 401 The Verify policy uses a JWKS as a source for public keys, but the signed JWS does not include a kid property in the header.
steps.jws.KeyParsingFailed 401 The public key could not be parsed from the given key information.
steps.jws.MissingPayload 401 The JWS payload is missing.
steps.jws.NoAlgorithmFoundInHeader 401 Occurs when the JWS omits the algorithm header.
steps.jws.NoMatchingPublicKey 401 The Verify policy uses a JWKS as a source for public keys, but the kid in the signed JWS is not listed in the JWKS.
steps.jws.UnhandledCriticalHeader 401 A header found by the Verify JWS policy in the crit header is not listed in KnownHeaders.
steps.jws.UnknownException 401 An unknown exception occurred.
steps.jws.WrongKeyType 401 Wrong type of key specified. For example, if you specify an RSA key for an Elliptic Curve algorithm, or a curve key for an RSA algorithm.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Occurs when
InvalidAlgorithm The only valid values are: RS256, RS384, RS512, PS256, PS384, PS512, ES256, ES384, ES512, HS256, HS384, HS512.

EmptyElementForKeyConfiguration

FailedToResolveVariable

InvalidConfigurationForActionAndAlgorithmFamily

InvalidConfigurationForVerify

InvalidEmptyElement

InvalidFamiliesForAlgorithm

InvalidKeyConfiguration

InvalidNameForAdditionalClaim

InvalidNameForAdditionalHeader

InvalidPublicKeyId

InvalidPublicKeyValue

InvalidSecretInConfig

InvalidTypeForAdditionalClaim

InvalidTypeForAdditionalHeader

InvalidValueForElement

InvalidValueOfArrayAttribute

InvalidVariableNameForSecret

MissingConfigurationElement

MissingElementForKeyConfiguration

MissingNameForAdditionalClaim

MissingNameForAdditionalHeader

 Other possible deployment errors.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "TokenExpired"
JWS.failed All JWS policies set the same variable in the case of a failure. jws.JWS-Policy.failed = true

Example error response

For error handling, the best practice is to trap the errorcode part of the error response. Do not rely on the text in the faultstring, because it could change.

Example fault rule

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

Política VerifyJWT

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Occurs when
steps.jwt.AlgorithmInTokenNotPresentInConfiguration 401 Occurs when the verification policy has multiple algorithms.
steps.jwt.AlgorithmMismatch 401 The algorithm specified in the Generate policy did not match the one expected in the Verify policy. The algorithms specified must match.
steps.jwt.FailedToDecode 401 The policy was unable to decode the JWT. The JWT is possibly corrupted.
steps.jwt.GenerationFailed 401 The policy was unable to generate the JWT.
steps.jwt.InsufficientKeyLength 401 For a key less than 32 bytes for the HS256 algorithm, less than 48 bytes for the HS386 algortithm, and less than 64 bytes for the HS512 algorithm.
steps.jwt.InvalidClaim 401 For a missing claim or claim mismatch, or a missing header or header mismatch.
steps.jwt.InvalidCurve 401 The curve specified by the key is not valid for the Elliptic Curve algorithm.
steps.jwt.InvalidJsonFormat 401 Invalid JSON found in the header or payload.
steps.jwt.InvalidToken 401 This error occurs when the JWT signature verification fails.
steps.jwt.JwtAudienceMismatch 401 The audience claim failed on token verification.
steps.jwt.JwtIssuerMismatch 401 The issuer claim failed on token verification.
steps.jwt.JwtSubjectMismatch 401 The subject claim failed on token verification.
steps.jwt.KeyIdMissing 401 The Verify policy uses a JWKS as a source for public keys, but the signed JWT does not include a kid property in the header.
steps.jwt.KeyParsingFailed 401 The public key could not be parsed from the given key information.
steps.jwt.NoAlgorithmFoundInHeader 401 Occurs when the JWT contains no algorithm header.
steps.jwt.NoMatchingPublicKey 401 The Verify policy uses a JWKS as a source for public keys, but the kid in the signed JWT is not listed in the JWKS.
steps.jwt.SigningFailed 401 In GenerateJWT, for a key less than the minimum size for the HS384 or HS512 algorithms
steps.jwt.TokenExpired 401 The policy attempts to verify an expired token.
steps.jwt.TokenNotYetValid 401 The token is not yet valid.
steps.jwt.UnhandledCriticalHeader 401 A header found by the Verify JWT policy in the crit header is not listed in KnownHeaders.
steps.jwt.UnknownException 401 An unknown exception occurred.
steps.jwt.WrongKeyType 401 Wrong type of key specified. For example, if you specify an RSA key for an Elliptic Curve algorithm, or a curve key for an RSA algorithm.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
InvalidNameForAdditionalClaim The deployment will fail if the claim used in the child element <Claim> of the <AdditionalClaims> element is one of the following registered names: kid, iss, sub, aud, iat, exp, nbf, or jti.
InvalidTypeForAdditionalClaim If the claim used in the child element <Claim> of the <AdditionalClaims> element is not of type string, number, boolean, or map, the deployment will fail.
MissingNameForAdditionalClaim If the name of the claim is not specified in the child element <Claim> of the <AdditionalClaims> element, the deployment will fail.
InvalidNameForAdditionalHeader This error ccurs when the name of the claim used in the child element <Claim> of the <AdditionalClaims> element is either alg or typ.
InvalidTypeForAdditionalHeader If the type of claim used in the child element <Claim> of the <AdditionalClaims> element is not of type string, number, boolean, or map, the deployment will fail.
InvalidValueOfArrayAttribute This error occurs when the value of the array attribute in the child element <Claim> of the <AdditionalClaims> element is not set to true or false.
InvalidValueForElement If the value specified in the <Algorithm> element is not a supported value, the deployment will fail.
MissingConfigurationElement This error will occur if the <PrivateKey> element is not used with RSA family algorithms or the <SecretKey> element is not used with HS Family algorithms.
InvalidKeyConfiguration If the child element <Value> is not defined in the <PrivateKey> or <SecretKey> elements, the deployment will fail.
EmptyElementForKeyConfiguration If the ref attribute of the child element <Value> of the <PrivateKey> or <SecretKey> elements is empty or unspecified, the deployment will fail.
InvalidConfigurationForVerify This error occurs if the <Id> element is defined within the <SecretKey> element.
InvalidEmptyElement This error occurs if the <Source> element of the Verify JWT policy is empty. If present, it must be defined with an Edge flow variable name.
InvalidPublicKeyValue If the value used in the child element <JWKS> of the <PublicKey> element does not use a valid format as specified in RFC 7517, the deployment will fail.
InvalidConfigurationForActionAndAlgorithm If the <PrivateKey> element is used with HS Family algorithms or the <SecretKey> element is used with RSA Family algorithms, the deployment will fail.

Variáveis de falha

Essas variáveis são definidas quando ocorre um erro de tempo de execução. Para mais informações, consulte O que você precisa saber sobre erros de política.

Variáveis Onde Exemplo
fault.name="fault_name" fault_name é o nome da falha, conforme listado na tabela Erros de ambiente de execução acima. O nome da falha é a última parte do código de falha. fault.name Matches "TokenExpired"
JWT.failed Todas as políticas do JWT definem a mesma variável em caso de falha. JWT.failed = true

Exemplo de resposta de erro

Códigos de falha de política JWT

Para gerenciar erros, a prática recomendada é interceptar a parte errorcode da resposta de erro. Não confie no texto em faultstring, porque ele pode mudar.

Exemplo de regra de falha

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "TokenExpired")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>

Política XMLThreatProtection

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
steps.xmlthreatprotection.ExecutionFailed 500 The XMLThreatProtection policy can throw many different types of ExecutionFailed errors. Most of these errors occur when a specific threshold set in the policy is exceeded. These types of errors include: element name length, child count, node depth, attribute count, attribute name length, and many others. You can see the complete list in the XMLThreatProtection policy runtime error troubleshooting topic.
steps.xmlthreatprotection.InvalidXMLPayload 500 This error occurs if the input message payload specified by the XMLThreatProtection policy's <Source> element is not a valid XML Document.
steps.xmlthreatprotection.SourceUnavailable 500 This error occurs if the message variable specified in the <Source> element is either:
  • Out of scope (not available in the specific flow where the policy is being executed)
  • Is not one of the valid values request, response, or message
steps.xmlthreatprotection.NonMessageVariable 500 This error occurs if the <Source> element is set to a variable which is not of type message.

Notes:

  • The error name ExecutionFailed is the default error name and will be returned regardless of the type of error detected; however, this default can be changed by setting an organization-level property. When this property is set, the error name will reflect the actual error. For example, "TextExceeded" or "AttrValueExceeded". See Usage Notes for details.
  • The 500 HTTP status is the default; however, the HTTP Status can be changed to 400 for request flow faults by setting an organization-level property. See Usage Notes for details.

Deployment errors

None.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name Matches "SourceUnavailable"
xmlattack.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. xmlattack.XPT-SecureRequest.failed = true

Example error response

{
  "fault": {
    "faultstring": "XMLThreatProtection[XPT-SecureRequest]: Execution failed. reason: XMLThreatProtection[XTP-SecureRequest]: Exceeded object entry name length at line 2",
    "detail": {
      "errorcode": "steps.xmlthreatprotection.ExecutionFailed"
    }
  }
}

Example fault rule

<FaultRule name="XML Threat Protection Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ExecutionFailed") </Condition>
    </Step>
    <Condition>(xmlattack.XPT-SecureRequest.failed = true) </Condition>
</FaultRule>

Política XMLtoJSON

This section describes the fault codes and error messages that are returned and fault variables that are set by Edge when this policy triggers an error. This information is important to know if you are developing fault rules to handle faults. To learn more, see What you need to know about policy errors and Handling faults.

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
steps.xmltojson.ExecutionFailed 500 This error occurs when the input payload (XML) is empty or the input XML is invalid or malformed.
steps.xmltojson.InCompatibleType 500 This error occurs if the type of the variable defined in the <Source> element and the <OutputVariable> element are not the same. It is mandatory that the type of the variables contained within the <Source> element and the <OutputVariable> element matches.
steps.xmltojson.InvalidSourceType 500 This error occurs if the type of the variable used to define the <Source> element is invalid.The valid types of variable are message and string.
steps.xmltojson.OutputVariableIsNotAvailable 500 This error occurs if the variable specified in the <Source> element of the XML to JSON policy is of type string and the <OutputVariable> element is not defined. The <OutputVariable> element is mandatory when the variable defined in the <Source> element is of type string.
steps.xmltojson.SourceUnavailable 500 This error occurs if the message variable specified in the <Source> element of the XML to JSON policy is either:
  • out of scope (not available in the specific flow where the policy is being executed) or
  • can't be resolved (is not defined)

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
EitherOptionOrFormat If one of the elements <Options> or <Format> is not declared in the XML to JSON Policy, then the deployment of the API proxy fails.
UnknownFormat If the <Format> element within the XML to JSON policy has an unknown format defined, then the deployment of the API proxy fails. Predefined formats include: xml.com, yahoo, google, and badgerFish.

Fault variables

These variables are set when a runtime error occurs. For more information, see What you need to know about policy errors.

Variables Where Example
fault.name="fault_name" fault_name is the name of the fault, as listed in the Runtime errors table above. The fault name is the last part of the fault code. fault.name = "SourceUnavailable"
xmltojson.policy_name.failed policy_name is the user-specified name of the policy that threw the fault. xmltojson.XMLtoJSON-1.failed = true

Example error response

{
  "fault": {
    "faultstring": "XMLToJSON[XMLtoJSON-1]: Source xyz is not available",
    "detail": {
      "errorcode": "steps.xml2json.SourceUnavailable"
    }
  }
}

Example fault rule

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="XML to JSON Faults">
    <Step>
        <Name>AM-SourceUnavailableMessage</Name>
        <Condition>(fault.name Matches "SourceUnavailable") </Condition>
    </Step>
    <Step>
        <Name>AM-BadXML</Name>
        <Condition>(fault.name = "ExecutionFailed")</Condition>
    </Step>
    <Condition>(xmltojson.XMLtoJSON-1.failed = true) </Condition>
</FaultRule>

Política de XSLTransform

Runtime errors

These errors can occur when the policy executes.

Fault code HTTP status Cause Fix
steps.xsl.XSLSourceMessageNotAvailable 500 This error occurs if the message or string variable specified in the <Source> element of the XSL Transform policy is either out of scope (not available in the specific flow where the policy is being executed) or can't be resolved (is not defined).
steps.xsl.XSLEvaluationFailed 500 This error occurs if the input XML payload is unavailable/malformed or the XSLTransform policy fails/is unable to transform the input XML file based on the transformation rules provided in the XSL file. There could be many different causes for the XSLTransform policy to fail. The reason for failure in the error message will provide more information on the cause.

Deployment errors

These errors can occur when you deploy a proxy containing this policy.

Error name Cause Fix
XSLEmptyResourceUrl If the <ResourceURL> element in the XSL Transform policy is empty, then the deployment of the API proxy fails.
XSLInvalidResourceType If the resource type specified in the <ResourceURL> element of the XSL Transform policy is not of type xsl, then the deployment of the API proxy fails.