JSON Threat Protection runtime error troubleshooting

You're viewing Apigee Edge documentation.
Go to the Apigee X documentation. info

ExecutionFailed

Error Code

steps.jsonthreatprotection.ExecutionFailed

Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[policy_name]:
          Execution failed. reason: JSONThreatProtection[policy_name]: error_description
          at line line_num",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
        }
    }
}

Types of Errors and possible causes

The JSONThreatProtection policy can throw many different types of ExecutionFailed errors. The table below lists the different types of errors and their possible causes:

Error type	Cause
Exceeded object entry name length	The maximum string length allowed in an object's entry name is exceeded.
Exceeded object entry count	The maximum number of entries allowed in an object is exceeded.
Exceeded array element count	The maximum number of elements allowed in an array is exceeded.
Exceeded container depth	The maximum allowed nested depth is exceeded.
Exceeded string value length	The maximum length allowed for a string value is exceeded.
Invalid JSON object	The input JSON Payload is invalid.

Exceeded object entry name length

Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[policy_name]:
          Execution failed. reason: JSONThreatProtection[policy_name]:
          Exceeded object entry name length at line line_num",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
        }
    }
}

Example Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[JSON-Threat-Protection-1]:
          Execution failed. reason: JSONThreatProtection[JSON-Threat-Protection-1]:
          Exceeded object entry name length at line 2",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
        }
    }
}

Cause

This error occurs if the input message payload specified by the <Source> element contains a JSON object with a property name that exceeds the maximum length specified in the <ObjectEntryNameLength> element.

For example, if the <ObjectEntryNameLength> element is specified as 5 in the policy, but the input message payload has a JSON property whose name exceeds 5 characters, then this error is thrown.

Diagnosis

Examine the error message to identify the JSONThreatProtection policy name and the line number where the long entry name occurs. For example, in the following error message, the JSONThreatProtection policy name is JSON-Threat-Protection-1 and line number in the payload is 2.
```
JSONThreatProtection[JSON-Threat-Protection-1]: Execution failed. reason:
JSONThreatProtection[JSON-Threat-Protection-1]: Exceeded object entry name
length at line 2
```

Examine the policy you identified in Step 1, and note the value specified in the <ObjectEntryNameLength> element.

For example, in the following JSONThreatProtection policy, <ObjectEntryNameLength> is set to 5:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<JSONThreatProtection async="false" continueOnError="false" enabled="true" name="JSON-Threat-Protection-1">
    <DisplayName>JSON Threat Protection-1</DisplayName>
    <Properties/>
    <ArrayElementCount>3</ArrayElementCount>
    <ContainerDepth>12</ContainerDepth>
    <ObjectEntryCount>5</ObjectEntryCount>
    <ObjectEntryNameLength>5</ObjectEntryNameLength>
    <Source>request</Source>
    <StringValueLength>50</StringValueLength>
</JSONThreatProtection>

Examine the specific line number (identified in Step 1) of the input payload and check if the length of the object name is greater than the value specified in the <ObjectEntryNameLength> element (identified in Step 2). If the length of the object name exceeds that number, then that is the cause of the error.

Here is an example input payload:
```
{
   "number" : 500,
   "string" : "text"
}
```
The JSON payload shown above has a property named number at line 2 which has 6 characters (the name length is 6). Since the length of the object name is greater than 5 (the value specified for <ObjectEntryNameLength> element) you get the following error:
```
JSONThreatProtection[JSON-Threat-Protection-1]: Execution failed. reason:
JSONThreatProtection[JSON-Threat-Protection-1]: Exceeded object entry name
length at line 2
```

Resolution

If the JSONThreatProtection policy was meant to protect against payloads with object entry names that exceed the defined value then the error message is expected. In this case, no additional action is required.

However, if you determine that longer object entry names can be specified in the payload without any consequence, then modify the <ObjectEntryNameLength> to a suitable value based on your requirements.

For example, if you think you can allow object names up to a length of 10 characters, then modify the JSONThreatProtection policy as follows:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<JSONThreatProtection async="false" continueOnError="false" enabled="true" name="JSON-Threat-Protection-1">
    <DisplayName>JSON Threat Protection-1</DisplayName>
    <Properties/>
    <ArrayElementCount>3</ArrayElementCount>
    <ContainerDepth>12</ContainerDepth>
    <ObjectEntryCount>5</ObjectEntryCount>
    <ObjectEntryNameLength>10</ObjectEntryNameLength>
    <Source>request</Source>
    <StringValueLength>50</StringValueLength>
</JSONThreatProtection>

Exceeded object entry count

Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[policy_name]:
          Execution failed. reason: JSONThreatProtection[policy_name]:
          Exceeded object entry count at line line_num",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
        }
    }
}

Example Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[JSON-Threat-Protection-1]:
          Execution failed. reason: JSONThreatProtection[JSON-Threat-Protection-1]:
          Exceeded object entry count at line 7",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
        }
    }
}

Cause

This error occurs if the input message payload specified by the <Source> element contains a JSON object that contains more entries (properties) than the value specified in the <ObjectEntryCount> element of the policy.

For example, if the <ObjectEntryCount>element is 5, but the input JSON payload has more than 5 entries, then this error is thrown.

Diagnosis

Examine the error message to identify the JSONThreatProtection policy name and the line number where the entry count is exceeded. For example, in the following error message, the policy name is JSON-Threat-Protection-1 and line number in the payload is 7:
```
JSONThreatProtection[JSON-Threat-Protection-1]: Execution failed. reason:
JSONThreatProtection[JSON-Threat-Protection-1]: Exceeded object entry count
at line 7
```

Make a note of the value specified in the <ObjectEntryCount> element of the policy (identified in Step 1).

In the following policy example, <ObjectEntryCount> is set to 5:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<JSONThreatProtection async="false" continueOnError="false" enabled="true" name="JSON-Threat-Protection-1">
    <DisplayName>JSON Threat Protection-1</DisplayName>
    <Properties/>
    <ArrayElementCount>3</ArrayElementCount>
    <ContainerDepth>12</ContainerDepth>
    <ObjectEntryCount>5</ObjectEntryCount>
    <ObjectEntryNameLength>6</ObjectEntryNameLength>
    <Source>request</Source>
    <StringValueLength>50</StringValueLength>
</JSONThreatProtection>

Examine the specific line number (identified in Step 1) of the input payload and check if the number of entities in the payload is greater than the value specified for <ObjectEntryCount> element (identified in Step 2). If the number of objects exceeds the object entry count, then that is the cause of the error.

Here is an example input payload:
```
{
"name" : "John",
"id" : 234687,
"age" : 31,
"city" : "New York",
"country" : "USA",
"company" : "Google"
}
```
In the JSON payload shown above, the 6th entry occurs at line #7 (company). Since the count of the object entries in the input JSON payload is greater than 5 (the value specified for <ObjectEntryCount> element) you get the following error:
```
JSONThreatProtection[JSON-Threat-Protection-1]: Execution failed. reason:
JSONThreatProtection[JSON-Threat-Protection-1]: Exceeded object entry count at
line 7
```

Resolution

If the JSONThreatProtection policy was meant to protect against payloads with a number of object entries that exceeds a specific threshold, then the error message is expected. In this case, you don't need to take any additional action.

However, if you determine that more object entries can be included in the payload without any consequence, then modify the <ObjectEntryCount> to a suitable value based on your requirements.

For example, If you think you can allow up to 10 object entries, then modify the JSONThreatProtection policy as follows:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<JSONThreatProtection async="false" continueOnError="false" enabled="true" name="JSON-Threat-Protection-1">
    <DisplayName>JSON Threat Protection-1</DisplayName>
    <Properties/>
    <ArrayElementCount>3</ArrayElementCount>
    <ContainerDepth>12</ContainerDepth>
    <ObjectEntryCount>10</ObjectEntryCount>
    <ObjectEntryNameLength>6</ObjectEntryNameLength>
    <Source>request</Source>
    <StringValueLength>50</StringValueLength>
</JSONThreatProtection>

Exceeded array element count

Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[policy_name]:
          Execution failed. reason: JSONThreatProtection[policy_name]:
          Exceeded array element count at line line-num",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
        }
    }
}

Example Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[JSON-Threat-Protection-1]:
          Execution failed. reason: JSONThreatProtection[JSON-Threat-Protection-1]:
          Exceeded array element count at line 3",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
        }
    }
}

Cause

This error occurs if the input message payload specified by the <Source> element contains a JSON array with a number of elements more than the number specified in the <ArrayElementCount> element of the policy.

For example, if the <ArrayElementCount> element is specified as 3, but the input payload has a JSON array with more than 3 elements, then this error is thrown.

Diagnosis

Examine the error message to identify the policy name and the line number where the array length is exceeded. For example, in the following error message, the policy name is JSON-Threat-Protection-1 and line number in the payload is 3:
```
JSONThreatProtection[JSON-Threat-Protection-1]: Execution failed. reason:
JSONThreatProtection[JSON-Threat-Protection-1]: Exceeded array element count at line 3
```

Make a note of the value specified for the <ArrayElementCount> element of the policy (identified in Step 1).

In the following JSONThreatProtection policy example, <ArrayElementCount> is set to 3:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<JSONThreatProtection async="false" continueOnError="false" enabled="true" name="JSON-Threat-Protection-1">
    <DisplayName>JSON Threat Protection-1</DisplayName>
    <Properties/>
    <ArrayElementCount>3</ArrayElementCount>
    <ContainerDepth>12</ContainerDepth>
    <ObjectEntryCount>5</ObjectEntryCount>
    <ObjectEntryNameLength>6</ObjectEntryNameLength>
    <Source>request</Source>
    <StringValueLength>50</StringValueLength>
</JSONThreatProtection>

Examine the specific line number (identified in Step 1) of the input payload and check if the array specified there has a higher count than the number specified in the <ArrayElementCount> element (identified in Step 2). If the number of array elements exceeds the count, then that is the cause of the error.

Here is an example input payload:
```
{
 "name":"Ford",
 "models":[
    "Mustang",
    "Endeavour",
    "Fiesta",
    "EcoSport",
    "Focus"
 ]
}
```
The JSON Payload shown above has 5 elements in the array named models at line 3. Because the number of array elements is greater than 3 (the value specified for <ArrayElementCount> element) you get the following error:
```
JSONThreatProtection[JSON-Threat-Protection-1]: Execution failed. reason:
JSONThreatProtection[JSON-Threat-Protection-1]: Exceeded array element count
at line 3
```

Resolution

If JSONThreatProtection policy was meant to protect against payloads with a specific array count threshold, then the error message is expected. In this case, there is no additional action required.

However, if you determine that a higher number of elements in an array can be allowed, then modify <ArrayElementCount> to a suitable value based on your requirements.

For example, If you think you can allow up to 5 array elements, then modify the policy as follows:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<JSONThreatProtection async="false" continueOnError="false" enabled="true" name="JSON-Threat-Protection-1">
    <DisplayName>JSON Threat Protection-1</DisplayName>
    <Properties/>
    <ArrayElementCount>5</ArrayElementCount>
    <ContainerDepth>12</ContainerDepth>
    <ObjectEntryCount>5</ObjectEntryCount>
    <ObjectEntryNameLength>6</ObjectEntryNameLength>
    <Source>request</Source>
    <StringValueLength>50</StringValueLength>
</JSONThreatProtection>

Exceeded container depth

Error response body

Runtime traffic returns a 500 response code with the following error:

{
    "fault": {
        "faultstring": "JSONThreatProtection[policy_name]:
          Execution failed. reason: JSONThreatProtection[policy_name]:
          Exceeded container depth at line line-num",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
        }
    }
}

Example Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[JSON-Threat-Protection-1]:
          Execution failed. reason: JSONThreatProtection[JSON-Threat-Protection-1]:
          Exceeded container depth at line 5",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
        }
    }
}

Cause

This error occurs if the input message payload specified by the <Source> element contains a JSON object that contains JSON elements with a container depth that exceeds the maximum container depth specified in the policy's <ContainerDepth> element. Container depth is the maximum allowed nested depth for JSON elements. For example, an array containing an object that contains an object would result in a containment depth of 3.

For example, if the <ContainerDepth> element is 3, but the input payload has a container depth that exceeds this limit, then this error is thrown.

Diagnosis

Examine the error message to identify the JSONThreatProtection policy name and the line number where the container depth is exceeded. For example, in the following error message, the policy name is JSON-Threat-Protection-1 and the line number in the payload is 5.
```
JSONThreatProtection[JSON-Threat-Protection-1]: Execution failed. reason:
JSONThreatProtection[JSON-Threat-Protection-1]: Exceeded container depth at
line 5
```

Make a note of the value specified for the <ContainerDepth> element (identified in Step 1).

In the following JSONThreatProtection policy example, <ContainerDepth> is set to 5:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<JSONThreatProtection async="false" continueOnError="false" enabled="true" name="JSON-Threat-Protection-1">
    <DisplayName>JSON Threat Protection-1</DisplayName>
    <Properties/>
    <ArrayElementCount>3</ArrayElementCount>
    <ContainerDepth>5</ContainerDepth>
    <ObjectEntryCount>5</ObjectEntryCount>
    <ObjectEntryNameLength>20</ObjectEntryNameLength>
    <Source>request</Source>
    <StringValueLength>50</StringValueLength>
</JSONThreatProtection>

Examine the specific line number (identified in Step 1) of the input payload and check if the container depth in the payload is higher than the value specified in the <ContainerDepth> element (identified in Step 2). If the container depth exceeds the count, then that is the cause of the error.

Here is an example input payload:
```
{
 "ContainerDepth2":[ {
       "ContainerDepth4":[
          {
             "ContainerDepth6":[
                "1",
                "2"
             ]
          }
       ]
    }
 ]
}
```
The JSON payload shown above has a container depth of 6 at line 5. Since depth is greater than 5, the value specified for <ContainerDepth> element of JSONThreatProtection policy you get the following error:
```
JSONThreatProtection[JSON-Threat-Protection-1]: Execution failed. reason:
JSONThreatProtection[JSON-Threat-Protection-1]: Exceeded container depth at
line 5
```

Resolution

If the JSONThreatProtection policy was meant to protect against payloads with container depths that exceed the specified value, then the error message is expected. In this case, there is no additional action required.

However, if you determine that a higher container depths are acceptable, then modify the <ContainerDepth> to a suitable value based on your requirements.

For example, If you think you can allow container depths up to 10, then modify the policy as follows:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<JSONThreatProtection async="false" continueOnError="false" enabled="true" name="JSON-Threat-Protection-1">
    <DisplayName>JSON Threat Protection-1</DisplayName>
    <Properties/>
    <ArrayElementCount>3</ArrayElementCount>
    <ContainerDepth>10</ContainerDepth>
    <ObjectEntryCount>5</ObjectEntryCount>
    <ObjectEntryNameLength>20</ObjectEntryNameLength>
    <Source>request</Source>
    <StringValueLength>50</StringValueLength>
</JSONThreatProtection>

Exceeded string value length

Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[policy_name]:
          Execution failed. reason: JSONThreatProtection[policy_name]:
          Exceeded string value length at line line-num",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
        }
    }
}

Example Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[JSON-Threat-Protection-1]:
          Execution failed. reason: JSONThreatProtection[JSON-Threat-Protection-1]:
          Exceeded string value length at line 3",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
        }
    }
}

Cause

This error occurs if the input message payload specified by the <Source> element contains JSON elements that have values with more characters than allowed by the <StringValueLength> element.

For example, if the <StringValueLength> element is set to 50 in the policy, but the input payload has one or more elements whose values contain more than 50 characters, then this error is thrown.

Diagnosis

Examine the error message to identify the policy name and the line number where the string length is exceeded. In the following example the policy name is JSON-Threat-Protection-1 andline in the payload 3.
```
JSONThreatProtection[JSON-Threat-Protection-1]: Execution failed. reason:
JSONThreatProtection[JSON-Threat-Protection-1]: Exceeded string value length at line 3
```

Make a note of the value specified for the <StringValueLength> element in the (identified in Step 1).

In the following JSONThreatProtection policy example, <StringValueLength> is set to 50:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<JSONThreatProtection async="false" continueOnError="false" enabled="true" name="JSON-Threat-Protection-1">
    <DisplayName>JSON Threat Protection-1</DisplayName>
    <Properties/>
    <ArrayElementCount>3</ArrayElementCount>
    <ContainerDepth>5</ContainerDepth>
    <ObjectEntryCount>5</ObjectEntryCount>
    <ObjectEntryNameLength>20</ObjectEntryNameLength>
    <Source>request</Source>
    <StringValueLength>50</StringValueLength>
</JSONThreatProtection>

Examine the specific line number (identified in Step 1) of the input payload and check if the length of the value is greater than the number of characters specified for the <StringValueLength> element (identified in Step 2). If the length of the value exceeds the limit, then that is the cause of the error.

Here is an example input payload:
```
{
  "Country": "New Zealand",
  "Place Name": "Taumatawhakatangihangakoauauotamateaturipukakapikimaungahoronukupokaiwhenuakitanatahu"
}
```
The JSON Payload shown above has an object named Place Name whose value Taumatawhakatangihangakoauauotamateaturipukakapikimaungahoronukupokaiwhenuakitanatahu has 85 characters at line 3. Since the length of the value is greater than 50, the value specified in the <StringValueLength> element, you get the following error:
```
JSONThreatProtection[JSON-Threat-Protection-1]: Execution failed. reason:
JSONThreatProtection[JSON-Threat-Protection-1]: Exceeded string value length
at line 3
```

Resolution

If the JSONThreatProtection policy was meant to protect against payloads with values that exceed a specific string length, then the error message is expected. In this case, there is no additional action required.

However, if you determine that a longer value length can be specified in the payload, then modify the <StringValueLength> to a suitable value based on your requirements.

For example, If you think you can allow a value up to a length of 90, then modify the policy as follows:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<JSONThreatProtection async="false" continueOnError="false" enabled="true" name="JSON-Threat-Protection-1">
    <DisplayName>JSON Threat Protection-1</DisplayName>
    <Properties/>
    <ArrayElementCount>3</ArrayElementCount>
    <ContainerDepth>5</ContainerDepth>
    <ObjectEntryCount>5</ObjectEntryCount>
    <ObjectEntryNameLength>20</ObjectEntryNameLength>
    <Source>request</Source>
    <StringValueLength>90</StringValueLength>
</JSONThreatProtection>

Not valid JSON object

Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[policy_name]:
          Execution failed. reason: string: at line line-num",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
        }
    }
}

Example Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[JSON-Threat-Protection-1]:
          Execution failed. reason: Expecting : at line 3",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
        }
    }
}

Cause

This error occurs if the input message payload specified by the <Source> element in the JSONThreatProtection policy is not a valid JSON object.

Diagnosis

Examine the error message to identify the policy name and the line number where the error occurred. In the following example the policy name is JSON-Threat-Protection-1 andline in the payload 2.
```
JSONThreatProtection[JSON-Threat-Protection-1]: Execution failed. reason: Expecting : at line 3
```
Examine the specific line number (identified in Step 1) of the input payload and check if the JSON object that was passed in the payload is indeed a valid JSON object.

Here is an example input payload:
```
{
  "Longitude": 6.11499,
  "Latitude"  50.76891
}
```
In the JSON payload shown above, the line 3 does not have ":" (colon). Since it's not a valid JSON object, you get the error:
```
JSONThreatProtection[JSON-Threat-Protection-1]: Execution failed. reason:
Expecting : at line 3
```

Resolution

Ensure a valid input JSON payload is passed to any API Proxy that includes the JSONThreatProtection policy.

For the example described above, modify the JSON payload as follows:

{
    "Longitude": 6.11499,
  "Latitude" : 50.76891
}

SourceUnavailable

Error Code

steps.jsonthreatprotection.SourceUnavailable

Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[policy_name]::
          Source[var_name] is not available"
        "detail": {
            "errorcode": "steps.jsonthreatprotection.SourceUnavailable"
        }
    }
}

Example Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[JSON-Threat-Protection-1]::
          Source requests is not available",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.SourceUnavailable"
        }
    }
}

Cause

This error occurs if the message variable specified in the <Source> element of the JSONThreatProtection policy is either:

Out of scope (not available in the specific flow where the policy is being executed)
Is not one of the valid values request, response, or message

For example, this error occurs if the <Source> element in the policy is set to a variable that doesn't exist in the flow where the policy is executed.

Diagnosis

Identify the policy name, and the name of the Source variable from the error message. For example, in the following error message, the policy name is JSON-Threat-Protection-1 and the Source variable is requests:
```
JSONThreatProtection[JSON-Threat-Protection-1]:: Source requests is not available
```

Examine the value specified for the <Source> element identified in Step 1.

In the following JSONThreatProtection policy example, the <Source> element is set to requests.

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<JSONThreatProtection async="false" continueOnError="false" enabled="true" name="JSON-Threat-Protection-1">
    <DisplayName>JSON Threat Protection-1</DisplayName>
    <Properties/>
    <ArrayElementCount>3</ArrayElementCount>
    <ContainerDepth>5</ContainerDepth>
    <ObjectEntryCount>5</ObjectEntryCount>
    <ObjectEntryNameLength>20</ObjectEntryNameLength>
    <Source>requests</Source>
    <StringValueLength>50</StringValueLength>
</JSONThreatProtection>

The valid values for <Source> element are request, response, or message. Because requests is not a valid value and doesn't exist in the flow where the policy is being executed, you get the error:

JSONThreatProtection[JSON-Threat-Protection-1]:: Source requests is not available

Resolution

Ensure that the variable set in the <Source> element of the failed JSONThreatProtection policy is set to either request, response, or message and exists in the flow where the policy executes.

To correct the example JSONThreatProtection policy shown above, you could modify the <Source> element to use the request variable, because it exists in the request flow:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<JSONThreatProtection async="false" continueOnError="false" enabled="true" name="JSON-Threat-Protection-1">
    <DisplayName>JSON Threat Protection-1</DisplayName>
    <Properties/>
    <ArrayElementCount>3</ArrayElementCount>
    <ContainerDepth>5</ContainerDepth>
    <ObjectEntryCount>5</ObjectEntryCount>
    <ObjectEntryNameLength>20</ObjectEntryNameLength>
    <Source>request</Source>
    <StringValueLength>50</StringValueLength>
</JSONThreatProtection>

NonMessageVariable

Error Code

steps.jsonthreatprotection.NonMessageVariable

Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[policy_name]:
          Variable var_name does not resolve to a Message"
        "detail": {
            "errorcode": "steps.jsonthreatprotection.NonMessageVariable"
        }
    }
}

Example Error response body

{
    "fault": {
        "faultstring": "JSONThreatProtection[JSON-Threat-Protection-1]:
          Variable message.content does not resolve to a Message",
        "detail": {
            "errorcode": "steps.jsonthreatprotection.NonMessageVariable"
        }
    }
}

Cause

This error occurs if the <Source> element in the JSONThreatProtection policy is set to a variable which is not of type message.

Message type variables represent entire HTTP requests and responses. The built-in Apigee Edge flow variables request, response, and message are of type message. To learn more about message variables, see the Variables reference.

Diagnosis

Identify the JSONThreatProtection policy name and the name of the Source variable from the error message. For example, in the following error message, the policy name is JSON-Threat-Protection-1and the Source variable is message.content:
```
JSONThreatProtection[JSON-Threat-Protection-1]: Variable message.content does not resolve to a Message
```

Examine <Source> element of the JSONThreatProtection policy (identified in Step 1).

In the following JSONThreatProtection policy example, <Source> is set to message.content instead of message:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<JSONThreatProtection async="false" continueOnError="false" enabled="true" name="JSON-Threat-Protection-1">
    <DisplayName>JSON Threat Protection-1</DisplayName>
    <Properties/>
    <ArrayElementCount>3</ArrayElementCount>
    <ContainerDepth>5</ContainerDepth>
    <ObjectEntryCount>5</ObjectEntryCount>
    <ObjectEntryNameLength>20</ObjectEntryNameLength>
    <Source>message.content</Source>
    <StringValueLength>50</StringValueLength>
</JSONThreatProtection>

Since message.content is not of type message, you get the error:

JSONThreatProtection[JSON-Threat-Protection-1]: Variable message.content does
not resolve to a Message

Resolution

Ensure that the <Source> element in the failed JSONThreatProtection policy is set to a message type flow variable that exists in the flow where the policy executes.

To correct the policy, you can modify the <Source> element to specify a variable that is of type message. For example, in the failed JSONThreatProtection you could specify the <Source> element as message:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<JSONThreatProtection async="false" continueOnError="false" enabled="true" name="JSON-Threat-Protection-1">
    <DisplayName>JSON Threat Protection-1</DisplayName>
    <Properties/>
    <ArrayElementCount>3</ArrayElementCount>
    <ContainerDepth>5</ContainerDepth>
    <ObjectEntryCount>5</ObjectEntryCount>
    <ObjectEntryNameLength>20</ObjectEntryNameLength>
    <Source>message</Source>
    <StringValueLength>50</StringValueLength>
</JSONThreatProtection>