Edge Microgateway release notes

You're viewing Apigee Edge documentation.
Go to the Apigee X documentation.
info

Version 3.3.x

Bug fixes and enhancements v.3.3.x

3.3.4

On September 18, 2024, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.3.4. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.3.4 3.3.4 3.3.4 3.3.4 3.2.2

Bug fixes and enhancements:

Issue ID Type Description
675987751 Bug

An issue was fixed where Edge Microgateway was not logging client IP addresses.

Security issues fixed

  • CVE-2021-23337
  • CVE-2024-4068
  • CVE-2020-28469
  • CVE-2020-28503

3.3.3

On April 25, 2024, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.3.3. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.3.3 3.3.3 3.3.3 3.3.3 3.2.2

Bug fixes and enhancements:

Issue ID Type Description
315939218 Removed

The Eureka client plug-in was removed from Edge Microgateway. The removal of this feature does not affect Edge Microgateway core functionality or rewriting target URLs. For more details, see Rewriting target URLs in plugins'.

283947053 Removed

Support for forever-monitor was removed from Edge Microgateway. You can replace forever-monitor with PM2. For details, see this Apigee Community post: Edgemicro + PM2: Starting edgemicro as a service.

Security issues fixed

  • CVE-2023-0842
  • CVE-2023-26115
  • CVE-2022-25883
  • CVE-2017-20162
  • CVE-2022-31129
  • CVE-2022-23539
  • CVE-2022-23541
  • CVE-2022-23540
  • CVE-2024-21484
  • CVE-2022-46175
  • CVE-2023-45133
  • CVE-2020-15366
  • CVE-2023-26136
  • CVE-2023-26115

3.3.2

On August 18, 2023, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.3.2. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.3.2 3.3.2 3.3.2 3.3.2 3.2.2

Bug fixes and enhancements:

Issue ID Type Description
296187679 Feature

Supported Node.js versions include: 16, 18, and 20. As of version 3.3.2, Edge Microgateway CLI commands will only work on the supported versions. Executing CLI commands on unsupported versions will result in an error. See also Apigee Supported software and supported versions.

283947053 Bug

An issue was fixed where Edge Microgateway returned the first API product in the list of API products associated with an app. We now determine the correct API product to return based on the request.

274443329 Bug

An issue was fixed where Docker was pulling an outdated image version. The Docker node version has been updated to Node.js version 18. We now build the Docker image with version 18.17-buster-slim.

Security issues fixed

None.

3.3.1

On June 7, 2022, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.3.1. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.3.1 3.3.1 3.3.1 3.3.1 3.2.2

Bug fixes and enhancements:

Issue ID Type Description
220885293 Feature

Node.js version 16 is now supported.

231972608 Bug

An issue was fixed where the private configure command threw an error while trying to configure for a private cloud.

233315475 Bug

An issue was fixed where the json2xml plugin threw a parsing error while transforming the response from JSON to XML and when used in combination with the accumulate-response plugin.

221432797 Change

The Docker Node.js version of the base Edge Microgateway image was upgraded to Node.js 14.

215748732 Feature

Support for SAML token authentication was added to the revokekeys command.

You can now pass a SAML token instead of username and password credentials using the -t option on the revokekeys command.

For details, see the Command line reference.

218723889 Doc Update

The documentation was updated to include a link to the supported Edge Microgateway plugins stored on GitHub. See Existing plugins bundled with Edge Microgateway.

Security issues fixed

Issue ID Description
CVE-2021-23413 This affects the package jszip before 3.7.0. Crafting a new zip file with filenames set to Object prototype values (e.g proto, toString, etc) results in a returned object with a modified prototype instance.

3.3.0

On February 4, 2022, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.3.0. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.3.0 3.3.0 3.3.0 3.3.0 3.2.2

Bug fixes and enhancements:

Issue ID Type Description
219556824 Known Issue Edge Microgateway Gateway 3.3.0 is incompatible with the npm audit fix command.

Running npm audit fix causes apigeetool to be upgraded to 0.15.2, which impacts the edgemicro upgradeauth command.

If you execute npm audit fix and subsequently execute edgemicro upgradeauth, you will see this error:

Error: This method has been removed in JSZip 3.0, please check the upgrade guide.

To correct the problem, execute the following command to restore the correct version of apigeetool:

npm install apigeetool@0.15.1

This issue will be addressed in a future release of Edge Microgateway.

138622990 Feature

A new flag for the Quota plugin, isHTTPStatusTooManyRequestEnabled, configures the plugin to return an HTTP 429 response status instead of status 403 if there is a quota violation. See Configuration options for quota.

192534424 Bug

An issue was fixed where the response code seen in Apigee analytics did not match the Edge Microgateway response code.

198986036 Enhancement Edge Microgateway now fetches the public key of an identity provider (IDP) at each poll interval and also updates the key in case the public key of the IDP changes. Previously, the extauth plugin was not able to update the public key without reloading Edge Microgateway if the public key of an IDP changed.
168713541 Bug

Documentation was enhanced to explain how to configure TLS/SSL for multiple targets. See Using client SSL/TLS options.

171538483 Bug

Documentation was changed to correct the log file naming convention. See Log file naming conventions.

157908466 Bug

Documentation was changed to correctly explain how to install a specific version of Edge Microgateway. See Upgrading Edge Microgateway if you have an internet connection.

215748427 Bug An issue was fixed where the revokekeys command returned an error when revoking a key using an existing key and secret pair.
205524197 Bug Documentation was updated to include the full list of logging levels. See edgemicro attributes and How to set the logging level.

Version 3.2.x

Bug fixes and enhancements v.3.2.x

3.2.3

On September 17, 2021, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.2.3. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.2.3 3.2.3 3.2.3 3.2.3 3.2.2

Bug fixes and enhancements:

Issue ID Type Description
192416584 Feature

The disableStrictLogFile configuration attribute lets you relax strict file permissions on the application log file api-log.log. For details, see How to relax log file permissions.

192799989 Feature

The on_target_response_abort configuration attribute lets you control how Edge Microgateway behaves if the connection between the client (Edge Microgateway) and the target server closes prematurely. For details, see edgemicro attributes.

148062415 Bug An issue was fixed where in a Docker container context, Edge Microgateway did not shut down gracefully with the docker stop {containerId} command. The process was killed, but .sock and .pid files were not removed. Now the files are removed and restarting the same container works as expected.
190715670 Bug An issue was fixed where some requests became stuck during the internal reload activity of the microgateway. This issue was intermittent and occurred in high traffic situations. The issue was seen when tokenCache and cacheKey features of the OAuth plugin were used.
183910111 Bug An issue was fixed where a resource path URL with a trailing slash was incorrectly interpreted as a separate resource path. Now, for example, the paths /country/all and /country/all/ are interpreted as the same path.

Security issues fixed

Issue ID Description
CVE-2020-28503 The package copy-props before 2.0.5 are vulnerable to Prototype Pollution via the main functionality.
CVE-2021-23343 All versions of package path-parse are vulnerable to Regular Expression Denial of Service (ReDoS) via splitDeviceRe, splitTailRe, and splitPathRe regular expressions. ReDoS exhibits polynomial worst-case time complexity.

3.2.2

On Thursday, July 15, 2021, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.2.2. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.2.2 3.2.2 3.2.2 3.2.2 3.2.2

Bug fixes and enhancements:

Issue ID Type Description
185323500 Change

expires_in value changed from string to integer

The token request and refresh token request APIs now return expires_in as an integer value specified in seconds.

To comply with RFC 6749 The OAuth 2.0 Authorization Framework the expected value for the expires_in configuration parameter was changed from string to integer. For details, see Operation and configuration reference.

188492065 Change End of Node.js 8 support

Starting with release 3.2.2, Node.js 8 will no longer be supported. For more information, see Supported software and supported versions: Edge Microgateway.

183990345 Feature Configure log output for Docker container

The Edge Microgateway configuration parameter to_console lets you choose to send log information to standard output instead of to a log file. If you follow the steps to run Edge Microgateway in a Docker container, the container by default redirects stdout and error output to a file located in the container at the location: ${APIGEE_ROOT}/logs/edgemicro.log.

To prevent log information from being sent to edgemicro.log, use the new LOG_CONSOLE_OUTPUT_TO_FILE variable when you run the container.

For details on how to use this new variable, see Using Docker for Edge Microgateway.

183057665 Feature Make edgemicro.pid and edgemicro.sock file paths configurable.

A new -w, --workdir parameter for running a Docker container with Edge Microgateway, lets you specify the path to the directory where edgemicro.sock and edgemicro.pid files should be created in a Docker container. See Using Docker for Edge Microgateway.

191352643 Feature The Docker image for Edge Microgateway was updated to use NodeJS version 12.22. See Using Docker for Edge Microgateway.

Security issues fixed

Issue ID Description
CVE-2021-28860 In Node.js mixme, prior to v0.5.1, an attacker can add or alter properties of an object via '__proto__' through the mutate() and merge() functions. The polluted attribute will be directly assigned to every object in the program. This will put the availability of the program at risk causing a potential denial of service (DoS).
CVE-2021-30246 In the jsrsasign package through 10.1.13 for Node.js, some invalid RSA PKCS#1 v1.5 signatures are mistakenly recognized to be valid. NOTE: there is no known practical attack.
CVE-2021-23358 The package underscore from 1.13.0-0 and before 1.13.0-2, from 1.3.2 and before 1.12.1 are vulnerable to Arbitrary Code Injection via the template function, particularly when a variable property is passed as an argument as it is not sanitized.
CVE-2021-29469 Node-redis is a Node.js Redis client. Before version 3.1.1, when a client is in monitoring mode, the regex begin used to detected monitor messages could cause exponential backtracking on some strings. This issue could lead to a denial of service. The issue is patched in version 3.1.1.
CVE-2020-8174 The Docker image was updated to use Node.js version 12.22

3.2.1

On Friday, March 5, 2021, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.2.1. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.2.1 3.2.1 3.2.1 3.2.1 3.2.1

Bug fixes and enhancements:

Issue ID Type Description
180362102 Bug An issue was fixed where JWK keys having a null value caused applications to fail.

The null condition is now handled to avoid passing a null value in jwkPublicKeys.

Note: This fix requires you to upgrade the edgemicro-auth proxy.

179971737 Bug An issue was fixed where target 4XX / 5XX status responses were logged as proxy errors for edgemicro_* proxies.

For Edge Microgateway transactions, incorrect target error counts were shown in the Apigee Edge error code analytics dashboard. Error codes for target errors were being counted as proxy errors. This issue has been fixed and correct target error counts are now shown.

179674670 Feature A new feature was added that allows you to filter the list of API products placed in a JWT based on product status codes.

API products have three status codes - Pending, Approved, and Revoked. A new property called allowProductStatus has been added to the Set JWT Variables policy in the edgemicro-auth proxy. To use this property to filter API products listed in the JWT:

  1. Open the edgemicro-auth proxy in the Apigee proxy editor.
  2. Add the allowProductStatus property to the SetJWTVariables policy's XML and specify a comma-separated list of status codes to filter on. For example, to filter on Pending and Revoked status:
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <Javascript timeLimit="20000" async="false" continueOnError="false"
        enabled="true" name="Set-JWT-Variables">
        <DisplayName>Set JWT Variables</DisplayName>
        <FaultRules/>
        <Properties>
            <Property name="allowProductStatus">Pending,Revoked</Property>
        </Properties>
        <ResourceURL>jsc://set-jwt-variables.js</ResourceURL>
    </Javascript>
    
    

    If you only want Approved products to be listed, then set the property as follows:

    <Property name="allowProductStatus">Approved</Property>
  3. Save the proxy.

    If the Property tag is not present, then products with all status codes will be listed in the JWT.

    To use this new property, you must upgrade the edgemicro-auth proxy.

178423436 Bug Key and secret values passed in the CLI or through environment variables are visible in process explorer command line arguments.

An issue was reported where the Edge Microgateway key and secret values that were passed either from command line arguments or set through environment variables were displayed in the arguments of node worker/child processes after starting the microgateway.

To fix this issue for the environment variable scenario, values are no longer visible in the process explorer command line arguments.

If the key and secret values are passed in the command line while starting the microgateway, the settings supersede any environment variable values, if set. In this case, the values are still visible in the process explorer command line arguments.

178341593 Bug A documentation error for the apikeys plugin was fixed.

The README file for the apikeys plugin incorrectly included a gracePeriod property. We removed this property and its description from the README.

The gracePeriod property is implemented in the oauth plugin. To use the grace period feature, you must use the oauth plugin.

179366445 Bug An issue was addressed where the payload was getting dropped for all GET requests to targets.

You can control the desired behavior with a new configuration parameter, edgemicro: enable_GET_req_body. When set to true, the request header transfer-encoding: chunked is added to all GET requests and a GET payload, if present, is sent to the target. If false (the default), the payload is silently removed before the request is sent to the target.

For example:

edgemicro:
 enable_GET_req_body: true

According to RFC 7231, section 4.3.1: GET, a GET request payload has no defined semantics, so it can be sent to the target.

3.2.0

On Thursday, January 21, 2021, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.2.0. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.2.0 3.2.0 3.2.0 3.2.0 3.2.0

Bug fixes and enhancements:

Issue ID Type Description
152640618 Bug Enabled the extauth plugin to set the x-api-key header to contain the client_id on the request object when the token is valid. The x-api-key is then available to subequent plugins.
168836123, 172295489, 176462355, 176462872 Feature Added support for Node.js 14.
172376835 Bug Use the correct time unit for the /token endpoint in the edgemicro-auth proxy.

An issue was fixed where the /token endpoint in the edgemicro-auth proxy returned expires_in in milliseconds; however, per the OAuth Specification, it should be consistent with the time unit for refresh_token_expires_in, which is seconds.

The fix does not change the length of expiry time but only the time unit. It only applies to the expires_in field in the access token response payload. The JWT token in the same response payload would contain two fields, iat and exp, and they are generated correctly, and have always been, with the seconds time unit.

If clients have been relying on the expires_in value, in milliseconds, to refresh tokens before tokens were to expire, then applying this fix without modifying the clients would cause much more frequent and unnecessary refreshes. These clients will need to be modified to account for the time unit change to maintain the original behavior.

If clients have always used the values in the JWT token to evaluate the token refresh period, then the clients should not need to change.

173064680 Bug An issue was fixed where the microgateway ended the target request before all the data chunks were processed.

This is an intermittent issue observed on high payload size requests and the issue was introduced in the 3.1.7 release.

174640712 Bug Add proper data handling to plugins.

Proper data handling has been added to the following plugins: json2xml, accumulate-request, accumulate-response, and header-uppercase. For plugin details, see microgateway-plugins.

Version 3.1.x

Bug fixes and enhancements v.3.1.x

3.1.8

On Monday, November 16, 2020, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.1.8. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.1.8 3.1.9 3.1.7 3.1.3 3.1.2

Bug fixes and enhancements:

Issue ID Type Description
169201295 Bug Numeric and boolean values were incorrectly parsed in environment variable tags.

Environment variable replacement handling parsed all values as strings, which resulted in parsing errors for boolean or numeric values. For example edgemicro.port expects and requires a numeric value. Fixes were made to support boolean and numeric values. See Setting configuration attributes with environment variable values for configuration details.

169202749 Bug Environment variable replacement was not working in some cases.

Environment variable replacement handling was not working for some configuration attributes. See Setting configuration attributes with environment variable values for information on limitations.

168732942 Bug A problem was fixed where OAuth scopes were not restricting API proxy access as expected.

The /token flow in the edgemicro-auth proxy generated JWTs without the correct product scopes defined on Edge as a result of two different scenarios: 1) the request payload to the /token flow did not pass a scope parameter, or 2) an invalid scope was passed in the request payload to the /token flow. A fix was made to return all scopes defined in API products on Apigee Edge.

170609716 Bug A problem was fixed where the /refresh flow in the edgemicro-auth proxy generated a JWT with no apiProductList.

170708611 Bug API product scopes are not available to custom plugins.

The API product scopes were not made available to custom plugins, nor were written to the cache config file. See About the plugin init() function to see how scope details are made accessible to plugins.

169810710 Feature Key and secret saved in the cache config file.

The Edge Microgateway key and secret were being saved in the cache config yaml file on every reload/start. In 3.1.8, the key and secret are no longer saved in the cache config file. If the key and secret were previously written in the cache config file, they will be removed.

170708621 Feature Cannot disable the analytics plugin.

In previous microgateway versions, the analytics plugin was enabled by default and there was no way to disable it. In version 3.1.8, a new configuration parameter, enableAnalytics, was introduced to enable or disable the analytics plugin. See Configuration reference for details.

159571119 Bug Getting null error in onerror_request hook in custom plugins for response/socket timeout.

Fixes were made to populate the correct HTTP status code and error message for onerror_request events and the correct error message for onerror_response events.

3.1.7

On Thursday, September 24, 2020, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.1.7. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.1.7 3.1.8 3.1.6 3.1.2 3.1.1

Bug fixes and enhancements:

Issue ID Type Description
131708105 Bug The analytics plugin mishandled the null response from axpublisher calls and caused workers to exit.

133162200 Bug Developer app information was not populated in analytics with either 403 status responses caused by unauthorized product resource paths or 401 responses caused by an expired or invalid token.

132194290 Bug Analytics records are discarded when Apigee Edge rejects some analytics records.

158618994 Bug Excessive Redis client connections.

161404373 Bug In the event of a 404 status response, the full proxy URI was included in the response message.
166356972 Bug

Running Edge Microgateway with Node.js version 12.13.x or higher resulted in the following error when executing plugins that transform the request payload:

{"message":"write after end","code":"ERR_STREAM_WRITE_AFTER_END"}

168681746 Bug Edge Microgateway manual reload with redisBasedConfigCache:true was not working.

149256174 Bug OAuth plugin errors were not logged for network failures.

166517190 Bug The jwk_public_keys data was not stored and fetched by Synchronizer and stored in Redis.

141659881 Bug Error handling of invalid target certificate showed misleading error responses.

142808699 Bug The accesscontrol plugin was not handling 'allow' and 'deny' sections correctly.

The microgateway now processes the deny section properly and respects the order of the 'allow' and 'deny' sections. A new noRuleMatchAction property was added to the microgateway config file to provide parity with the Apigee Edge AccessControl policy. See also the Access Control Plugin README on GitHub.

3.1.6

On Thursday, August 20, 2020, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.1.6. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.1.6 3.1.7 3.1.5 3.1.1 3.1.1

Bug fixes and enhancements:

Issue ID Type Description
163711992 Feature Custom key and certificate file location options for the rotatekey command.

For details on these new command options, see Rotate keys.

154838259 Bug Fix key rotation for multi-instances in multiple data centers

For details on these new command options, see Rotate keys.

145525133 Alpha feature New plugin metrics

See the New plugin metrics README on GitHub for details.

159396879 Bug Remove unused package Helper
161092943 Bug Base path validation was incorrect

Before version 3.1.6, the proxy basepath was matched incorrectly when the basepath did not end with /.

The following explains further the previous behavior (which is fixed in 3.1.6):

Suppose a proxy is configured with the basepath: /hello/v1 and a target path to https://mocktarget.apigee.net. Now, assume the proxy receives the following requests:

Request path Resolved path Outcome
/hello/v1/json https://mocktarget.apigee.net/json The resolved path is correct because the basepath of /hello/v1 is matched correctly.
Request path Resolved path Outcome
/hello/v1json https://mocktarget.apigee.netjson The resolved path is incorrect because /hello/v1 is a substring of /hello/v1json. Because /hello/v1json is not a valid path, Edge Microgateway should have thrown a 404. In version 3.1.6 and later, a 404 error is thrown in this case.
160431789 Bug Custom Plugins - config object passed to init is not populated

Apigee Edge configuration is made available in the configuration object for all custom plugins after merging with the Edge Microgateway configuration file. See config.

162758808 Bug New quota configuration for Redis backing store

You can use the following configuration to specify a Redis backing store for quotas. For details, see Using a Redis backing store for quota.

3.1.5

On Friday, June 26, 2020, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.1.5. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.1.5 3.1.6 3.1.4 3.1.0 3.1.0

Bug fixes and enhancements:

Issue ID Type Description
159210507 Feature Configuration to exclude plugin processing

A new configuration feature was added to skip the processing of plugins for specified URLs. For details, see Configuring exclude URLs for plugins.

156986819, 158529319 Bug Issues with the json2xml plugin were fixed

Issues were fixed where the plugin produced duplicate Content-Type headers and where headers were not sent to the target as expected in some cases.

156560067, 159688634 Feature

Use environment variable values in configuration

A feature was added that allows you to specify environment variables using tags in the configuration file. The specified environment variable tags are replaced by the actual environment variable values. Replacements are stored in memory only and not stored in the original configuration or cache files. For details, see Setting configuration attributes with environment variable values.

155077210 Bug A log formatting issue was fixed.

An issue was fixed where the target host appeared in logs with extraneous colons appended to it.

153673257 Bug

(Edge for Private Cloud only) Microgateway-aware products not pulled

An issue was fixed where microgateway-aware products were not being pulled. This issue exsisted on Edge for Private Cloud installations only.

154956890, 155008028, 155829434 Feature Support filtering downloaded products by custom attributes

For details, see Filtering products by custom attributes

153949764 Bug An issue was fixed where the Edge Microgateway process crashed when the log destination file was full

Exception handling was improved to trap the error and print a message to the console.

155499600 Bug Issues with key rotation and KVM upgrade were fixed

See also Rotating JWT keys.

3.1.4

On Friday, April 23, 2020, we released the following fix to Edge Microgateway.

Bug fix:

A dependency issue in version 3.1.3 was fixed. Version 3.1.3 has been marked as deprecated in the npm repository. Otherwise, all of the bug fixes and enhancements described in the version 3.1.3 release note apply to this release.

3.1.3

On Wednesday, April 15, 2020, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.1.3. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.1.3 3.1.3 3.1.3 3.0.14 3.0.9

Bug fixes and enhancements:

  • 153509313 - An issue was fixed where the Node.js debug module results in memory leaks. The issue exists in version v3.1.0, v3.1.1, and 3.1.2.
  • 153509313 - An issue was fixed where the same message ID for two different transactions was printed in the logging output.
  • 151673570 - An issue was fixed where Edge Microgateway was not updated to use new Apigee KVM APIs. Edge Microgateway now uses the new commands for adding and updating the KVM values.
  • 152822846 - In previous releases, Edge Microgateway was updated so that its processing of resource path mapping matches that of Apigee Edge. In this release, an issue was fixed where the pattern /literal_string/* was not handled correctly. For example, /*/2/*. See also Configuring the behavior of a resource path of '/', '/*', and '/**'.
  • 152005003 - Changes were made to enable organization and environment scoped identifiers for quotas.
  • 152005003 - Changes were made to enable organization and environment scoped identifiers for quotas. The combination of 'org + env + appName + productName' is used as the quota identifier.

3.1.2

On Monday, March 16, 2020, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.1.3. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.1.2 3.1.2 3.1.2 3.0.13 3.0.9

Bug fixes and enhancements:

  • 151285018 - A feature enhancement was made to add HTTP proxy support for traffic between Edge Microgateway and backend targets. In addition, issues were fixed for existing HTTP proxy support between Edge Microgateway and Apigee Edge. For details, see:
  • 149101890 - The log notification code for cases where the target server or load balancer closes its connection was changed from ERROR to INFO.
  • 150746985 - An issue was fixed where the edgemicro verify command did not work properly if either redisBasedConfigCache: true or quotaUri: https://%s-%s.apigee.net/edgemicro-auth were present in the config file.
  • 151284716 - An enhancement was made to close server connections faster when workers are restarted during a reload.
  • 151588764 - Update Node.js version in the Docker image used to run Edge Microgateway in a Docker container to 12, because Node.js v8 is deprecated.
  • 151306049 - A documentation update was made to list the Apigee Edge management APIs that are used by Edge Microgateway CLI commands. See What management APIs does Edge Microgateway use?.

3.1.1

On Thursday, February 20, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.1.1. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.1.1 3.1.1 3.1.1 3.0.13 3.0.9

Bug fixes and enhancements:

  • 146069701 - An issue was fixed where the microgateway-core module did not respect HTTP_PROXY and HTTPS_PROXY environment variables. With this change, proxy settings in the YAML configuration file, if specified, are now ignored; only the environment variables are used to specify the proxy.

    If you want to specify proxy configuration in the configuration file, you must also specify an HTTP_PROXY variable that mentions the same proxy URL as the one specified in the config file. For example, if you specify the following configuration:

    edge_config:
      proxy: http://10.128.0.20:3128
      proxy_tunnel: true

    You must also specify this environment variable:

    HTTP_PROXY=http://10.128.0.20:3128
  • 146320620 - A new configuration parameter, edgemicro.headers_timeout, was added. This attribute limits the amount of time (in milliseconds) the HTTP parser will wait to receive the complete HTTP headers. For example:
    edgemicro:
    keep_alive_timeout: 6000
    headers_timeout: 12000

    Internally, the parameter sets the Node.js Server.headersTimeout attribute on requests. (Default: 5 seconds more than the time set with edgemicro.keep_alive_timeout. This default setting prevents load balancers or proxies from erroneously dropping the connection.)

  • 149278885 - A new feature was added that allows you to set the target API timeout at the API proxy level instead of using one global timeout setting.

    If you set the TargetEndpoint property io.timeout.millis in the API proxy, Edge Microgateway will be able to retrieve that property and apply target endpoint-specific timeouts. If this parameter is not applied, Edge Microgateway uses the global timeout specified with edgemicro.request_timeout.

3.1.0

On Tuesday, January 21, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.1.0. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.1.0 3.1.0 3.1.0 3.0.12 3.0.9

Bug fixes and enhancements:

  • 144187500 - A new WARN level event will be logged when the quotas.failOpen flag is triggered. This flag is triggered if a quota-processing error occurs or if the "quota apply" request to Edge fails to update remote quota counters. In this case, the quota will be processed based on local counts only until the next successful remote quota sync happens. Previously, this event was only logged when the log level was set to DEBUG.

    For example:

    2020-01-20T02:52:53.040Z [warn][localhost:8000][5][foo-eval][test][hello/][]
    [DbpGIq9jKfzPX8jvXEivhA0LPwE][f372cc30-3b2f-11ea-845f-a627f][quota][remote quota not
    available so processing locally, setting quota-failed-open for identifier: AppQuota60.Quota60]
    [GET][][][][]
  • 145023519 - An issue was fixed where in-flight or new transactions were impacted whenever Edge Microgateway detected a change to an API proxy. Now, when a change is made to a proxy, Edge Microgateway refreshes the cache and worker nodes restart. With this change, in-flight transactions and new API calls being sent to the microgateway are not impacted.
  • 146378327 - The log level of sourceRequest, targetRequest, and targetResponse have been changed to the INFO level.
  • 146019878 - A discrepancy between the latency that was calculated for "API Proxy Performance" in Edge analytics and Edge Microgateway sourceResponse/targetResponse log events has been fixed. Now, the latency in Edge analytics and Microgateway log events is aligned.
  • Pattern matching logic related changes:
    • 147027862 - The oauth plugin was updated to support the following resource path matching patterns as specified in API Products:
      • /{literal}**
      • /{literal}*
      • Any combination of above two patterns

      With this change, Edge Microgateway plugin now follows the same pattern matching as Apigee Edge, as explained in Configuring the behavior of a resource path of '/', '/*', and '/**'.

    • 145644205 - Update pattern matching logic of apiKeys plugin to match oauth plugin.
  • 143488312 - A problem was fixed where leading or trailing spaces in the client ID parameter caused the creation of the JWT product list to be empty for OAuth token and API key requests.
  • 145640807 and 147579179 - A new feature has been added that allows a special Edge Microgateway instance called "the synchronizer" to retrieve configuration data from Apigee Edge and write it to a local Redis database. Other microgateway instances can then be configured to read their configuration data from the database. This feature adds a level of resilience to Edge Microgateway. It allows microgateway instances to start up and function without needing to communicate with Apigee Edge. For details, see Using the synchronizer.

    The syncrhonizer feature is currently supported to work with Redis 5.0.x.

Version 3.0.x

Bug fixes and enhancements v.3.0.x

3.0.10

On Friday, November 8, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.0.10. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.0.10 3.0.8 3.0.8 3.0.11 3.0.8

Bug fixes and enhancements:

  • 142677575 - A feature update was made so that the pattern matching for resource paths used in API products for Edge Microgateway now aligns with the resource path pattern matching used by Apigee Edge, as described in Configuring the behavior of a resource path of '/', '/*', and '/**'.

    Note: If you use a compound resource pattern like /*/2/**, you must ensure that the edgemicro_auth proxy is added to a standalone API product. Then, you must include that product in the proxy's Developer App, as illustrated in the following screenshot:

    alt_text

    Note: The features.isSingleForwardSlashBlockingEnabled configuration property, as described in Configuring the behavior of a resource path of '/', '/*', and '/**', is not supported for Edge Microgateway.

  • 143740696 - The quotas configuration structure has changed (see also the release notes for version 3.0.9). The quotas property is used to configure the quota plugin. The change in structure was made to improve the clarity of the configuration elements. To configure the quota plugin, use the following YAML configuration. Note that the configuration property is called quotas. For details about the individual quotas configuration properties, see Configuration options for quota.

    edgemicro:
      home: ../gateway
      port: 8000
      max_connections: -1
      max_connections_hard: -1
      logging:
        level: info
        dir: /var/tmp
        stats_log_interval: 60
      plugins:
        dir: ../plugins
        sequence:
          - oauth
          - quota
    quotas:
      bufferSize:
        hour: 20000
        minute: 500
        default: 10000
      useDebugMpId: true
      failOpen: true
    ...
  • 141750056 - A new feature was added that allows you to use Redis as the quota backing store. If useRedis is true then the volos-quota-redis module used. When true, the quota is restricted to only those Edge Microgateway instances that connect to Redis. If false, the volos-quota-apigee module is used as the backing store, and the quota counter is global. For details, see Configuration options for quota. For example:
    edgemicro:
    ...
    quotas:
      useRedis: true
      redisHost: localhost
      redisPort: 6379
      redisDb: 1
  • 140574210 - The default expiration time for tokens generated by the edgemicro-auth proxy has been changed from 108000 milliseconds (1.8 minutes) to 1800 seconds (30 minutes).
  • 143551282 - To support SAML enabled orgs, the edgemicro genkeys command has been updated to include a ‑‑token parameter. This parameter lets you use an OAuth token for authentication instead of username/password. For details, see Generating keys.

3.0.9

On Friday, October 11, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.0.9. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.0.9 3.0.7 3.0.7 3.0.10 3.0.7

Bug fixes and enhancements:

  • 141989374 - A new "fail open" feature was added for the quota plugin. When this feature is enabled, if a quota-processing error occurs or if the "quota apply" request to Edge fails to update remote quota counters, the quota will be processed based on local counts only until the next successful remote quota sync happens. In both of these cases, a quota-failed-open flag is set in the request object.

    To enable the quota "fail open" feature, set the following configuration:

    quotas :
     failOpen : true

    Note: In addition, the name of the OAuth plugin's fail-open request object flag has been changed to oauth-failed-open.

  • 142093764 - A configuration change was made to the edgemicro-auth proxy to prevent quota overruns. The change is to set the quota type to calendar. To use this improvement, you must update your edgemicro-auth to version 3.0.7 or higher.
  • 142520568 - A new feature has been added to enable the logging of the MP (message processor) ID in quota responses. To use this feature, you must update your edgemicro-auth proxy to version 3.0.7 or higher and set the following configuration:
    quotas:
      useDebugMpId: true

    When useDebugMpId is set, quota responses from Edge will contain the MP id and will be logged by Edge Microgateway. For example:

    {
        "allowed": 20,
        "used": 3,
        "exceeded": 0,
        "available": 17,
        "expiryTime": 1570748640000,
        "timestamp": 1570748580323,
        "debugMpId": "6a12dd72-5c8a-4d39-b51d-2c64f953de6a"
    }

3.0.8

On Thursday, September 26, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.0.8. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.0.8 3.0.6 3.0.6 3.0.9 3.0.6

Bug fixes and enhancements:

  • 140025210 - A new "fail open" feature was added. This feature allows API processing to continue if an expired JWT token cannot be refreshed due to a connection error that prevents a successful API key verification call to the edgemicro-auth proxy.

    The feature allows you to set a grace period where the old token remains in cache and is re-used until the grace period expires. The feature allows Edge Microgateway to continue processing requests in case of a temporary connection failure. When connectivity resumes, and a successful Verify API Key call goes through, a new JWT is fetched and replaces the old JWT in the cache.

    To configure the new "fail open" feature, do the following:

    1. Set the following properties in the oauth stanza in the Edge Microgateway configuration file:
      oauth:
        failOpen: true
        failopenGraceInterval: time_in_seconds
        cacheKey: true
        ...

      For example:

      oauth:
        failOpen: true
        failopenGraceInterval: 5
        cacheKey: true
        ...

      In this example, the old token will be used for 5 seconds if it cannot be refreshed due to a connectivity problem. After 5 seconds, an authentication error will be returned.

  • 141168968 - An update was made to include the correlation_id in all plugin log output. In addition, the log levels for some logs were changed to error as required.
  • 140193349 - A update was made to the edgemicro-auth proxy to require the Edge Microgateway key and secret to be verified on every Verify API Key request. Edge Microgateway has been updated to always send the key and secret on every Verify API Key request. This change prevents clients from obtaining a JWT with only an API key.
  • 140090250 - An update was made to add diagnostic logging for quota processing. With this change, it is now possible to correlate quoto log output with the rest of Edge Microgateway logs.

3.0.7

On Thursday, September 12, we released the following fixes and enhancements to Edge Microgateway.

Component versions:

The following table lists the version numbers for the individual component projects associated with Edge Microgateway 3.0.7. Note that because each component is a separate project, release numbers may not match up with the main product version:

microgateway core config plugins edgeauth
3.0.7 3.0.5 3.0.5 3.0.8 3.0.5

Bug fixes and enhancements:

  • 140075602 - An update was made to the OAuth plugin to return a 5xx status code where appropriate. Previously, the plugin only returned 4xx status codes in all non-200 cases. Now, for any message response that is not a 200 status, the exact 4xx or 5xx code will be returned, depending on the error.

    This feature is disabled by default. To enable this feature, add the oauth.useUpstreamResponse: true property to your Edge Microgateway configuration. For example:

    oauth:
      allowNoAuthorization: false
      allowInvalidAuthorization: false
      gracePeriod: 10
      useUpstreamResponse: true
  • 140090623 - In release 3.0.6, a new configuration property was added, quota.quotaUri. Set this config property if you want to manage quotas through the edgemicro-auth proxy that is deployed to your org. If this property is not set, the quota endpoint defaults to the internal Edge Microgateway endpoint. For example:
    edge_config:
      quotaUri: https://%s-%s.apigee.net/edgemicro-auth

    In release 3.0.7, the edgemicro-auth was updated to accept this new configuration. To use the quotaUri property, you must upgrade to the latest edgemicro-auth proxy. For details, see Upgrading the edgemicro-auth proxy.

  • 140470888 - An Authorization header was added to quota calls to provide authentication. Also, the edgemicro-auth proxy was modified to remove "organization" from the quota identifier. Because the quota endpoint resides in the customer's organization, the quota identifier is no longer needed.
  • 140823165 - The following property name:
    edgemicro:
        keepAliveTimeout

    was documented incorrectly in release 3.0.6. The correct property name is:

    edgemicro:
        keep_alive_timeout
  • 139526406 - A bug was fixed where an incorrect quota count occurred if a developer app had multiple products. Quota is now correctly enforced for each product in an app that has multiple products. The combination of 'appName + productName' is used as the quota identifier.

3.0.6

On Thursday, August 29, we released the following fixes and enhancements to Edge Microgateway.

  • 138633700 - Added a new configuration property, keepAliveTimeout. This property enables you to set the Edge Microgateway timeout (in milliseconds). (Default: 5000 milliseconds)

    For example:

    edgemicro:
      keep_alive_timeout: 600
  • 140090623 - Added a new configuration property, quotaUri. Set this config property if you want to manage quotas through the edgemicro-auth proxy that is deployed to your org. If this property is not set, the quota endpoint defaults to the internal Edge Microgateway endpoint. For example:
    edge_config:
      quotaUri: https://your_org-your_env.apigee.net/edgemicro-auth
    

    To use this feature, you must first deploy the latest version of the edgemicro-auth proxy to your org. For details, see Upgrading the edgemicro-auth proxy.

  • 138722809 - Added a new configuration property, stack_trace. This property lets you to control whether or not stack traces appear in log files. For example:
    stack_trace: false

    If stack_trace is set to true, the stack trace will be printed in logs. If it is set to false, the stack trace will not be printed in logs.

3.0.5

On Thursday, August 15, we released the following fixes and enhancements to Edge Microgateway.

Bugs fixed
  • 139005279 - An issue was fixed where the edgemicro status command did not return the right number of worker processes.
  • 138437710 - An issue was fixed in the ExitCounter class that prevented the proper log from being written.
General log message improvements
  • 139064652 - Added the capability to add trace and debug logging levels for event and system logs. For now, only the capability to add these log levels was added. Currently, available log levels are info, warn, and error.
  • 139064616 - Log output has been standardized for all console log statements. Console logging statements now includes these attributes:
    • Timestamp
    • Component name
    • Process ID
    • Console log message
JWT key and secret log message improvements
  • 138413755 - Improve JWT key and secret-related log messages for these CLI commands: cert, verify, upgradekvm, token, genkeys, revokekeys, rotatekey, and configure.
Timeout and connection refused error message improvements
  • 138413577 - Add and improve error handling for backend service timeouts.
  • 138413303 - Add and improve error handling for response and socket timeouts.
  • 138414116 - Add and improve error handling for "connection refused" errors.

3.0.4

On Thursday, August 1, we released the following fixes and enhancements to Edge Microgateway.

  • 134445926 - Improvements to internal Edge Microgateway authentication.
  • 137582169 - Addressed an issue where unwanted processes started up. The extra processes caused plugins to reload and used excessive memory. Edge Microgateway now keeps the number of processes within the expected limit.
  • 137768774 - Log message improvements:
    • Cleaned up transaction (request) logs.
    • Added more log messages where needed.
    • Moved transaction (request) log messages from console output to relevant log file.
    • Updated console logs to use a centralized logging function.
  • 138321133, 138320563 - Foundational internal change to quota buffer to enable future quota enhancements.

3.0.3

On Tuesday, July 23, we released the following fixes and enhancements to Edge Microgateway.

  • Logging enhancements: Existing runtime logs use a new eventLog() function that captures and logs runtime data in a consistent format. Log info includes:
    • Timestamp (ISO 8601: YYYY-MM-DDTHH:mm:ss.sssZ).
    • Log level (error, warn, or info).
    • Hostname - The requesting hostname from the request header.
    • Process ID - If you're running a cluster of Node.js processes, this is the ID of the process where the logging occurred.
    • Apigee organization name.
    • Environment name in the organization.
    • API proxy name.
    • Client IP address.
    • ClientId.
    • Correlation ID (not currently set).
    • Edge Microgateway component name.
    • Custom message - Some objects may print additional information that is passed to this error property.
    • Request method (if HTTP request).
    • Response status code (if HTTP request).
    • Error message.
    • Error code - If an object includes an error code, it is printed in this property.
    • Time taken.
    • Operating system end of line marker.

    Null property values result in empty brackets, [].

    The following example shows the log format:

    Timestamp [level][hostname][ProcessId][Org][Environment][APIProxy][ClientIp][ClientId][][component][customMessage][reqMethod][respStatusCode][errMessage][errCode][timeTaken]

    (137770055)

  • Performance: API products were not being filtered based on environment. This issue has been fixed. (135038879)
  • Miscellaneous functional test integrations and code quality improvements.

3.0.2

On Wednesday, July 3, 2019, we released the following fixes and enhancements to Edge Microgateway.

Code quality - Code has been reviewed for quality and code changes have been made to meet quality standards requested by users. We addressed code quality errors and warnings derived from JSHint. Some actual code errors were identified and repaired as a result. All Apigee Edge Microgateway modules were put through this process. See the June 28 and July 2 commits for microgateway-config, microgateway-core, microgateway-plugins,and microgateway. All modules with code quality changes have been tested with internal tools that verify the execution of Edge Microgateway for customer use cases.

3.0.1

On Friday, June 21, 2019, we released the following fixes and enhancements to Edge Microgateway.

  • 134834551 - Change the supported Node.js versions for Edge Microgateway
    (Node.js supported versions: 8 and 12; versions 7, 9, and 11 are experimental)
  • 134751883 - Edge Microgateway crashes when reloading under load
  • 134518428 - Products endpoint for Edge Microgateway returns 5XX if filter pattern is incorrect
  • 135113408 - Workers should restart if they terminate unexpectedly
  • 134945852 - tokenCacheSize is not used in oauth plug-in
  • 134947757 - set cacheTTL in oauth plug-in
  • 135445171 - gracePeriod calculation in OAuth is not correct
  • Use memored module provided with the Edge Microgateway installation
  • 135367906 - Security audit

Version 2.5.x

New features and enhancements v.2.5.x

(Fixed 2.5.38, 06/07/2019)

Improperly formatted JWTs can cause workers to crash when using token cache. Fixed in the Edge microgateway-plugins module. (b/134672029)

(Added 2.5.37) Add the CLI option edgemicro-cert -t.

The edgemicro cert -t option lets you specify an OAuth token to authenticate management APIs. See also Managing certificates.

(Added 2.5.35) Add support to debug Edge Microgateway using edgemicroctl.

You can use the mgdebug flag with edgemicroctl. See also Kubernetes integration tasks.

(Added 2.5.35) Enable a Windows build for edgemicroctl.

(Added 2.5.31) New edgemicro-auth/token API

A new edgemicro-auth/token API was added that allows you to pass the client/secret as a Base64 Encoded Basic Authorization header and the grant_type as a form parameter. See Obtaining bearer tokens directly.

(Fixed 2.5.31) Private configure does not respect token flag

An issue was fixed where configuring Edge Microgateway to use an OAuth2 access token on Edge for Private Cloud did not work properly (the token was not respected).

Docker: Support for using self-signed certificates

(Added 2.5.29) If you are using a Certificate Authority (CA) that's not trusted by default by Node.js, you can use the parameter NODE_EXTRA_CA_CERTS when you run a Docker container with Edge Microgateway. For details, see Using a CA that is not trusted by Node.js.

Docker: Support for TLS

(Added 2.5.29) Edge Microgateway running in a Docker container now supports TLS for incoming requests to the Edge Microgateway server (northbound requests) and for outgoing requests from Edge Microgateway to a target application (southbound requests).

The following examples explain in detail how to set up these TLS configurations:

In these examples, you will see how to use the container mount point /opt/apigee/.edgemicro to load the certificates, which are then referred to in the Edge Microgateway configuration file.

Docker: Support for request proxying

(Added 2.5.27) If you run Edge Microgateway in a Docker container, you can use these options to control proxy behavior when the microgateway is running behind a firewall:

  • HTTP_PROXY
  • HTTPS_PROXY
  • NO_PROXY

For details, see Run Edge Micro as a Docker container.

Docker: Updated plugin instructions

(Added 2.5.27) If you run Edge Microgateway in a Docker container, you now have two options for deploying plugins. One option, using a Docker mount point, is new. The other option existed previously, is basically unchanged; however, the Dockerfile has been updated. For details, refer to the following links:

New OAuth token support for KVM upgrade command

(Added 2.5.27) You can use an OAuth token with the upgradekvm command. For details, see Upgrading the KVM.

Segregating APIs in Edge Analytics

(Added 2.5.26) New analytics plugin flags allow you to segregate a specific API path so that it appears as a separate proxy in the Edge Analytics dashboards. For example, you can segregate health check APIs to avoid confusing them with actual API calls. For more information, see Excluding paths from analytics.

Configuring a local proxy

(Added 2.5.25) With a local proxy, you do not need to manually create a microgateway-aware proxy on Apigee Edge. Instead, the microgateway will use the local proxy's base path. For more information, see Using local proxy mode.

Using standalone mode

(Added 2.5.25) You can run Edge Microgateway disconnected completely from any Apigee Edge dependency. This scenario, called standalone mode, lets you run and test Edge Microgateway without an Internet connection., see Running Edge Microgateway in standalone mode.

Revoking keys

(Added 2.5.19) A new CLI command has been added that revokes the key and secret credentials for an Edge Microgateway configuration.

edgemicro revokekeys -o [organization] -e [environment] -u [username] -k [key] -s [secret]
For more information, see Revoke keys.

Docker support

(Added 2.5.19) You can now download the latest Edge Microgateway release as a Docker image:

docker pull gcr.io/apigee-microgateway/edgemicro:latest

Kubernetes support

(Added 2.5.19) You can deploy Edge Microgateway as a service or as a sidecar gateway in front of services deployed in a Kubernetes cluster. See: Integrate Edge Microgateway with Kubernetes overview.

Support for TCP nodelay option

(Added 2.5.16) A new configuration setting, nodelay, has been added to the Edge Micro configuration.

By default TCP connections use the Nagle algorithm to buffer data before sending it off. Setting nodelay to true, disables this behavior (data will immediately fire off data each time socket.write() is called). See also the Node.js documentation for more details.

To enable nodelay, edit the Edge Micro config file as follows:

edgemicro:
  nodelay: true
  port: 8000
  max_connections: 1000
  config_change_poll_interval: 600
  logging:
    level: error
    dir: /var/tmp
    stats_log_interval: 60
    rotate_interval: 24

New CLI options for Forever monitoring

(Added 2.5.12) New parameters have been added to the edgemicro forever command. These parameters let you specify the location of the forever.json file, and let you either start or stop the Forever background process. See also Forever monitoring

ParameterDescription
-f, --fileSpecifies the location of the forever.json file.
-a, --actionEither start or stop. The default is start.

Examples:

To start Forever:

edgemicro forever -f ~/mydir/forever.json -a start

To stop Forever:

edgemicro forever -a stop

JWT key rotation

A new feature was added that lets you rotate the public/private key pairs used to generate the JWT tokens used for OAuth security on Edge Microgateway. See Rotating JWT keys.

Filtering downloaded API proxies

By default, Edge Microgateway downloads all of the proxies in your Edge organization that start with the naming prefix "edgemicro_". You can change this default to download proxies whose names match a pattern. See Filtering downloaded proxies.

Specifying products without API proxies

In Apigee Edge, you can create an API product that does not contain any API proxies. This product configuration allows an API key associated with that product to work for with any proxy deployed in your organization. As of version 2.5.4, Edge Microgateway supports this product configuration.

Support for forever monitoring

Edge Microgateway has a forever.json file that you can configure to control how many times and with what intervals Edge Microgateway should be restarted. This file configures a service called forever-monitor, which manages Forever programmatically. See Forever monitoring.

Central management of the Edge Micro configuration file

If you run multiple Edge Microgateway instances, you may wish to manage their configurations from a single location. You can do this by specifying an HTTP endpoint where Edge Micro can download its configuration file. See Specifying a config file endpoint.

Support for forever CLI option

(Added 2.5.8) Use the edgemicro forever [package.json] command to specify the location of the forever.json file. Before the addition of this command, the config file had to be in the Edge Microgateway root directory.

For example:

edgemicro forever ~/mydir/forever.json

Addition of configUrl option to reload command

(Added 2.5.8) You can now use the --configUrl or -u option with the edgemicro reload command.

Grace period for JWT time discepancies

(Added 2.5.7) A gracePeriod attribute in OAuth configuration helps prevent errors caused by slight discrepancies between your system clock and the Not Before (nbf) or Issued At (iat) times specified in the JWT authorization token. Set this attribute to the number of seconds to allow for such discrepancies. See OAuth attributes.

(Added 2.5.7) A gracePeriod attribute in OAuth configuration helps prevent errors caused by slight discrepancies between your system clock and the Not Before (nbf) or Issued At (iat) times specified in the JWT authorization token. Set this attribute to the number of seconds to allow for such discrepancies. See OAuth attributes.

Bugs fixed v2.5.x

  • (Issue #236) Fix typo in clearing the cache.
  • (Issue #234) Reload crashes for Edge Microgateway 2.5.35.
  • (Issue #135) Invalid virtual host reference "secure" error when using the -v option. This fix modifies the edgemicro-auth proxy before deployment to ensure the virtual hosts match exactly what is specified in the "-v" flag. In addition, you can specify any number of and any name for the virtual host (no longer restricted to default and secure).
  • (Issue #141) The edgemicro reload command does not support the configuration file option -c. This issue has been fixed.
  • (Issue #142) Edge Microgateway complains about deprecated crypto at install time. This issue has been fixed.
  • (Issue #145) Quota not working with Edge Microgateway. This issue has been fixed.
  • (Apigee Community issue: https://community.apigee.com/questions/33149/emg-jwt-token-validated-against-both-api-proxies-a.html#answer-33336) JWT token validated against both API Proxies and Resource URI in OAUTH. This issue has been fixed.
  • (Apigee Community issue: https://community.apigee.com/questions/47846/microgateway-not-working-with-oauth.html) Microgateway not working with OAuth. This issue has been fixed.
  • Fix pidPath on Windows.
  • (Issue #157) Problem that caused the following error message has been fixed: ReferenceError: deployProxyWithPassword is not defined.
  • (Issue #169) Update Node.js dependencies (npm audit)
  • The edgemicro-auth proxy now uses the Edge JWT policies. The proxy no longer depends on Node.js to provide JWT support.

Version 2.4.x

New features and enhancements v.2.4.x

1. Set a custom alias for the edgemicro-auth proxy (PR 116)

You can change the default basepath for the edgemicro-auth proxy. By default, the basepath is /edgemicro-auth. To change it, use the -x flag on the edgemicro configure command.

Example:

edgemicro configure -x /mypath …


2. Wildcard support for base paths (PR 77)

You can use one or more "*" wildcards in the base path of an edgemicro_* proxy. For example, a base path of /team/*/members allows clients to call https://[host]/team/blue/members and https://[host]/team/green/members without you needing to create new API proxies to support new teams. Note that /**/ is not supported.

Important: Apigee does NOT support using a wildcard "*" as the first element of a base path. For example, this is NOT supported: /*/search.

3. Custom config path added to CLI for Private Cloud configuration (PR 99)

By default, the microgateway configuration file is in ./config/config.yaml. On the init, configure, and start commands, you can now specify a custom config path on the command line using the -c or --configDir flags. Fixed an issue where a custom config directory for Private Cloud installations was not recognized.

Example:

edgemicro start -o docs -e test -k abc123 -s xyz456 -c /home/microgateway/config

4. Respect *_PROXY variables (PR 61)

If Edge Microgateway is installed behind a firewall and is not able to communicate with Apigee Edge in the public cloud, there are two options to consider:

Option 1:

The first option is to set the edgemicro: proxy_tunnel option to true in the microgateway config file:

edge_config:
   proxy: http://10.224.16.85:3128
   proxy_tunnel: true

When proxy_tunnel is true, Edge Microgateway uses the HTTP CONNECT method to tunnel HTTP requests over a single TCP connection. (The same is true if the environment variables for configuring the proxy are TLS enabled).

Option 2:

The second option is to specify a proxy and set proxy_tunnel to false in the microgateway config file. For example:

edge_config:
   proxy: http://10.224.16.85:3128
   proxy_tunnel: false

In this case, you can set the following variables to control the hosts for each HTTP proxy that you wish to use, or which hosts should not handle Edge Microgateway proxies: HTTP_PROXY, HTTPS_PROXY, and NO_PROXY. You can set NO_PROXY as a comma delimited list of domains that Edge Microgateway should not proxy to. For example:

export HTTP_PROXY='http://localhost:3786'
export HTTPS_PROXY='https://localhost:3786'

For more information on these variables, see:

https://www.npmjs.com/package/request#controlling-proxy-behaviour-using-environment-variables


5. Set a custom timeout for target requests (PR 57)

You can set a custom timeout for target requests with this configuration:

edgemicro:
    request_timeout: 10

The timeout is set in seconds. If a timeout occurs, Edge Microgateway responds with a 504 status code.

6. Respect custom HTTP status messages on the target response (PR 53)

Edge Microgateway respects custom HTTP status messages set on the target response. In previous releases, status messages sent from the target were overridden with Node.js defaults.

7. The X-Forwarded-For header can set the client_ip for analytics

If present, the X-Forwarded-For header will set the client_ip variable that is reported in Edge Analytics. This feature lets you know the IP of the client that sent a request to Edge Microgateway.

8. OAuth plugin changes

The OAuth plugin supports API Key verification and OAuth access token verification. Before this change, the plugin accepted either form of security. With this change, you can allow only one of those security models (while maintaining backward compatibility).

The OAuth plugins adds two new flags:

  • allowOAuthOnly -- If set to true, every API must carry an Authorization header with a Bearer Access Token.

  • allowAPIKeyOnly -- If set to true, every API must carry an x-api-key header (or a custom location) with an API Key.

You set these flags in the Edge Microgateway configuration file like this:

oauth:
    allowNoAuthorization: false
    allowInvalidAuthorization: false
    keep-authorization-header: false
    allowOAuthOnly: false
    allowAPIKeyOnly: false

9. Improved the edgemicro-auth proxy (PR 40)

Improvements have been made to the edgemicro-auth proxy. Before these changes, the proxy stored keys in the Edge Secure Store, an encrypted vault. Now, the proxy stores keys in Edge's encrypted key-value map (KVM).

10. Rewriting default target URL in a plugin (PR 74)

You can also override the target endpoint port and choose between HTTP and HTTPS. Modify these variables in your plugin code: req.targetPort and req.targetSecure. To choose HTTPS, set req.targetSecure to true; for HTTP, set it to false. If you set req.targetSecure to true, see this discussion thread for more information.

11. Initial support for OAuth token authentication (PR 125)

You can configure Edge Microgateway to use an OAuth token for authentication instead of username/password. To use an OAuth token, use the following parameter on the edgemicro configure command:

-t, --token <token>

For example:

edgemicro configure -o docs -e test -t <your token>

Bugs fixed v2.4.3

  • Fixed an issue where a paid org was required to properly run the edgemicro-auth proxy. Now, you can use Edge Microgateway with trial orgs as well. (PR 5)
  • Fixed an issue where the stream was not finished processing data, but end handlers were executing anyway. This caused a partial response to be sent. (PR 71)
  • Fixed an issue where a custom config directory for Private Cloud installations was not recognized. (PR 110)
  • Fixed an issue with bi-directional SSL between the client and Edge Microgateway. (PR 70)
  • Fixed an issue where a trailing slash was required on the proxy basepath for API key verification to workk properly. Now, a trailing slash is not needed at the end of the basepath. (PR 48)

Version 2.3.5

New features and enhancements v.2.3.5

Proxy filtering

You can filter which microgateway-aware proxies an Edge Microgateway instance will process. When Edge Microgateway starts, it downloads all of the microgateway-aware proxies in the organization it's associated with. Use the following configuration to limit which proxies the microgateway will process. For example, this configuration limits the proxies the microgateway will process to three: edgemicro_proxy-1, edgemicro_proxy-2, and edgemicro_proxy-3:

proxies:
  - edgemicro_proxy-1
  - edgemicro_proxy-2
  - edgemicro_proxy-3

Analytics data masking

A new configuration lets you prevent request path information from showing up in Edge analytics. Add the following to the microgateway configuration to mask the request URI and/or request path. Note that the URI consists of the hostname and path parts of the request.

analytics:
  mask_request_uri: 'string_to_mask'
  mask_request_path: 'string_to_mask'

Version 2.3.3

New features and enhancements v.2.3.3

Following are the new features and enhancements for this release.

Disable automatic change polling

You can turn off automatic change polling by setting this attribute in the microgateway config:

disabled_config_poll_interval: true

By default, periodic polling picks up any changes made on Edge (changes to products, microgateway-aware proxies, etc) as well as changes made to the local config file. The default polling interval is 600 seconds (five minutes).

Rewriting target URLs in plugins

You can override the default target URL dynamically in a plugin by modifying these variables in your plugin code: req.targetHostname and req.targetPath.

New plugin function signature

A new plugin function signature has been added that provides the target response as an argument. This addition makes it easier for plugins to access the target response.

function(sourceRequest, sourceResponse, targetResponse, data, cb)

Simplified default logging output

By default, the logging service now omits the JSON of downloaded proxies, products, and JWT. You can change to default to output these objects by setting DEBUG=* when you start Edge Microgateway. For example:

DEBUG=* edgemicro start -o docs -e test -k abc123 -s xyz456

Custom config path added to CLI

By default, the microgateway configuration file is in ./config/config.yaml. On the init, configure, and start commands, you can now specify a custom config path on the command line. For example:

edgemicro start -o docs -e test -k abc123 -s xyz456 -c /home/microgateway/config

Bugs fixed v2.3.3

  • A memory leak was fixed that occurred during large request/responses.
  • Plugin execution order was fixed. It now behaves the way it is explained in the documentation.
  • The plugin accumulate-request plugin no longer hangs for GET requests.
  • An issue was fixed in the accumulate-response plugin where a lack of response body caused errors.

Release 2.3.1

Installation note

Some previous versions of Edge Microgateway let you install the software by downloading a ZIP file. These ZIP files are no longer supported. To install Edge Microgateway, you must use:

npm install -g edgemicro

Refer to the installation topic for more details.

New features and enhancements v.2.3.1

Following are the new features and enhancements for this release.

Filter proxies

A new configuration lets you filter which proxies that Edge Microgateway will load upon startup. Previously, the microgateway loaded all microgateway-aware proxies (proxies named edgemicro_*) pulled from the Edge organization/environment that you specified in the edgemicro configure command. This new feature lets you filter this list of proxies so that Edge Microgateway only loads the ones you specify. Simply add the proxies element to the microgateway config file like this:

edge micro:
proxies:
    - edgemicro_[name]
    - edgemicro_[name]
    ...

For example, let’s say you have 50 edgemicro_* proxies in your Edge org/env, including ones named edgemicro_foo and edgemicro_bar. You can tell the microgateway to use only these two proxies like this:

edge micro:
proxies:
    - edgemicro_foo
    - edgemicro_bar

Upon startup, the microgateway will only be able to call the specified proxies. Any attempts to call other microgateway-aware proxies downloaded from the Edge organization/environment will result in an error.

Set target request headers in plugins

There are two basic patterns to consider if you want to add or modify target request headers: one where the incoming request contains data (as in a POST request) and one where it does not (as in a simple GET request).

Let's consider a case where the incoming request contains data, and you want to set request headers on the target request. In previous versions of Edge Microgateway, it was not possible to set target headers reliably in this case.

The key to this pattern is to first accumulate all incoming data from the client. Then, in the onend_request() function, use the new function request.setOverrideHeader(name, value) to customize the headers.

Here is sample plugin code showing how to do this. The headers set in onend_request are sent to the target:

module.exports.init = function(config, logger, stats) {


  function accumulate(req, data) {
    if (!req._chunks) req._chunks = [];
    req._chunks.push(data);
  }

  return {

    ondata_request: function(req, res, data, next) {
      if (data && data.length > 0) accumulate(req, data);
      next(null, null);
    },

    onend_request: function(req, res, data, next) {
      if (data && data.length > 0) accumulate(req, data);
      var content = Buffer.concat(req._chunks);
      delete req._chunks;
      req.setOverrideHeader('foo', 'bar');
      req.setOverrideHeader('content-length', content.length);
      next(null, content);
    },


    onerror_request: function(req, res, data, next) {
      next(null, null);
    }

  };

}

If the request does not include data, then you can set target headers in the onrequest() handler. This pattern is not new -- it has been documented previously and has been used in the sample plugins provided with Edge Microgateway.

onrequest: function(req, res, next) {
      debug('plugin onrequest');
      req.headers['x-foo-request-id'] = "bar";
      req.headers['x-foo-request-start'] = Date.now();
      next();
    }

Zero-downtime reload feature

After making a configuration change to Edge Microgateway, you can load the configuration without dropping any messages. With this change, Edge Microgateway always starts in cluster mode, and he --cluster option has been removed from the edgemicro start command.

In addition, three new CLI commands have been added. You must run these commands from the same directory where the edgemicro start command was executed:

  • edgemicro status - Checks to see if the Edge Microgateway is running or not.
  • edgemicro stop - Stops the Edge Microgateway cluster.
  • edgemicro reload - Reloads the Edge Microgateway configuration with no downtime.

Automatic config reload with zero downtime

Edge Microgateway loads a new configuration periodically and executes a reload if anything changed. The polling picks up any changes made on Edge (changes to products, microgateway-aware proxies, etc) as well as changes made to the local config file. The default polling interval is 600 seconds (five minutes). You can change the default in the microgateway config file as follows:

edgemicro:
    config_change_poll_interval: [seconds]

Added version information to CLI

A --version flag was added to the CLI. To get the current version of Edge Microgateway, use:

edgemicro --version

New Edge Microgateway server SSL options

Edge Microgateway now supports the following server SSL options in addition to key and cert:

Option Description
pfx Path to a pfx file containing the private key, certificate, and CA certs of the client in PFX format.
passphrase A string containing the passphrase for the private key or PFX.
ca Path to a file containing a list of trusted certificates in PEM format.
ciphers A string describing the ciphers to use separated by a ":".
rejectUnauthorized If true, the server certificate is verified against the list of supplied CAs. If verification fails, an error is returned.
secureProtocol The SSL method to use. For example, SSLv3_method to force SSL to version 3.
servername The server name for the SNI (Server Name Indication) TLS extension.

Send log files to stdout

You can send log data to standard output with a new configuration setting:

edgemicro:
  logging:
    to_console: true  

See Managing log files.

Version 2.1.2

Following are the new features and enhancements for this release.

Allow custom API endpoint for configuration

There are new configurable endpoints for the authorization proxy that support the use of a custom auth service. These endpoints are:

  • edgeconfig:verify_api_key_url
  • edgeconfig:products

For details, see Using a custom auth service.

Version 2.1.1

Following are the new features and enhancements for this release.

Deploy auth proxy cross-platform compatible

An enhancement was made so that the command used to deploy the Edge Microgateway authorization proxy to Edge is compatible on Windows systems.

Version 2.1.0

New features and enhancements v.21.0

Following are the new features and enhancements:

Specify client SSL/TLS options

You can specify client options for SSL/TSL connections to targets using a new set of config options. See Using client SSL/TSL options.

Version 2.0.11

Installation note v2.0.11

Some previous versions of Edge Microgateway let you install the software by downloading a ZIP file. These ZIP files are no longer supported. To install Edge Microgateway, you must use:

npm install -g edgemicro

Refer to the installation topic for more details.

New features and enhancements v.2.0.11

Following are the new features and enhancements:

Specify a port on startup

The start command lets you specify a port number to override the port specified in the configuration file. You can also specify a port number using the PORT environment variable. See start command for details.

Optionally preserve auth headers

A new configuration setting, keepAuthHeader, lets you preserve the Authorization header sent in the request. If set to true, the Auth header is passed on to the target. See oauth attributes.

Ability to use a custom authorization service

If you want to use your own custom service to handle authentication, change the authUri value in the Edge Microgateway config file to point to your service. For details, see Using a custom auth service.

Version 2.0.4

Edge Microgateway v.2.0.4 was released on May 25, 2016.

New features and enhancements v2.0.4

Following are the new features and enhancements in this release.

Support for resource paths in products

Edge Microgateway now supports resource paths in products. Resource paths let you restrict access to APIs based on the proxy path suffix. For details on creating products and configuring resource paths, see Create API products.

Support for npm global install

You can now install Edge Microgateway using the npm -g (global) option. For details on this option refer to the npm documentation.

Version 2.0.0

Edge Microgateway v2.0.0 was released on April 18, 2016.

New features and enhancements v.2.0.0

Following are the new features and enhancements in this release.

Single process server

Edge Microgateway is now a single process server. It no longer uses a two process model where one process (previously known as the "agent") launches Edge Microgateway, the second process. The new architecture makes automation and containerization easier.

Namespaced configuration files

Configuration files now are namespaced using organization and environment so that multiple Microgateway instances can run on the same host. You can find the config files in ~/.edgemicro after you run the Edge Microgateway config command.

New environment variables

There are now 4 environment variables: EDGEMICRO_ORG, EDGEMICRO_ENV, EDGEMICRO_KEY, EDGEMICRO_SECRET. If you set these variables on your system, you do not have to specify their values when you use the Command-Line Interface (CLI) to configure and start Edge Microgateway.

Cached configuration

Edge Microgateway uses a cached configuration file if it restarts with no connection to Apigee Edge.

Cluster mode

There are now options to start Edge Microgateway in cluster mode. Cluster mode allows you to take advantage of multi-core systems. The microgateway employs the Node.js cluster module for this feature. For details, see the Node.js documentation.

Bugs fixed v2.0.0

Plugin event lifecycle now properly handles async code that contains code with a new callback.

Version 1.1.2

Edge Microgateway v. 1.1.2 was released on March 14, 2016.

New features and enhancements v.1.1.2

Following are the new features and enhancements in this release.

Performance Improvement

Edge Microgateway now uses the Node.js HTTP agent properly for better connection pooling. This enhancement improves performance and overall stability under high load.

Remote debugger support

You can configure Edge Microgateway to run with a remote debugger, like node-inspector.

New config file location

When you configure Edge Microgateway, the agent/config/default.yaml file is now copied to ~./edgemicro/config.yaml.

Log file rotation

A new config attribute lets you specify a rotation interval for Edge Microgateway logs.

Bugs fixed v1.1.2

The following bugs are fixed in v. 1.1.2.

Description
Java callout for edgemicro-internal proxy used with on-prem Edge now uses right MGMT server.
Remove typescript depenencies from the agent.
Fix CLI bug when using lean deployment option.
Fix cert logic dependency reference.